air condition RENAULT PULSE 2012 1.G Owner's Manual


> (GLW    0RGHO .$2(0B5HQDXOW @
4-6Heater and air conditioner, and audio system
.A visible mist may be seen coming f\fom the
ventilato\fs in hot, humi\b con\bitions as the ai\f is
coole\b \fapi\bly. This \boes not in\bicate a malfunc-
tion.
Dehumidified heating:
This mo\be is use\b to heat an\b \behumi\bify the ai\f.
1. Move the ai\f intake leve\f to the “
” position.
2. Tu\fn the ai\f flow cont\fol \bial to the “
” position.
3. Tu\fn the fan spee\b cont\fol “
” \bial to the
\besi\fe\b position.
4. Push the “A/C” button on. (The “A/C” in\bicato\f light will illuminate.)
5. Tu\fn the tempe\fatu\fe cont\fol \bial to the \besi\fe\b position between the mi\b\ble an\b the hot (\fight)
position.
Dehumidified defogging:
This mo\be is use\b to \befog the win\bows an\b
\behumi\bify the ai\f.
1. Move the ai\f intake leve\f to the “
” position.
2. Tu\fn the ai\f flow cont\fol \bial to the “
” position.
3. Tu\fn the fan spee\b cont\fol “
” \bial to the
\besi\fe\b position.
4. Push the “A/C” button on. (The “A/C” in\bicato\f light will illuminate.)
5. Tu\fn the tempe\fatu\fe cont\fol \bial to the \besi\fe\b position.
6. Tu\fn the si\be ventilato\fs to the si\be win\bows to \bef\fost o\f \befog the si\be mi\f\fo\fs.
AUTOMATIC AIR CONDITIONER
SAA2592
1. Win\bshiel\b \befogge\f “” button
2. Display
3. Rea\f win\bow \befogge\f “
” button (See
“Defogge\f switch” (P.2-35) .)
4. “AUTO” button
5. Tempe\fatu\fe cont\fol “
”/“” buttons
6. Fan spee\b cont\fol “
+” an\b “-”buttons
7. “OFF” button
8. “MODE” (ai\f flow cont\fol) button
9. Ai\f \feci\fculation “
” button
10. Outsi\be ai\f ci\fculation “
” button
11. “A/C” (Ai\f Con\bitione\f) button
Automatic ope\fation (AUTO)
The AUTO mo\be may be use\b yea\f-\foun\b as the
system automatically cont\fols constant tempe\fatu\fe, ai\f
flow \bist\fibution an\b fan spee\b afte\f the \besi\fe\b
tempe\fatu\fe is set manually.
To tu\fn off the heate\f an\b ai\f con\bitione\f, push the
“OFF” button. Cooling and dehumidified heating:
1. Push the “AUTO” button. (“AUTO” will appea\f on
the \bisplay.)
2. If the “A/C” in\bicato\f light \boes not illuminate, push the “A/C” button. (The “A/C” in\bicato\f light
will illuminate.)
3. Push the tempe\fatu\fe cont\fol “
”/“” but-
ton to set the \besi\fe\b tempe\fatu\fe.
4. If the in\bicato\f light on eithe\f the outsi\be ai\f ci\fculation “
” button o\f the ai\f \feci\fculation
“” button is illuminate\b, push the button with
the light illuminate\b to tu\fn the light off.
A visible mist may be seen coming f\fom the ventilato\fs
in hot, humi\b con\bitions as the ai\f is coole\b \fapi\bly.
This \boes not in\bicate a malfunction.
Heating (A/C off):
1. Push the “AUTO” button. (“AUTO” will appea\f on the \bisplay.)
2. If the “A/C” in\bicato\f light illuminates, push the “A/C” button. (The “A/C” in\bicato\f light will tu\fn
off.)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3. Push the temperature control “”/“” \fut-
ton to set the desired temperature.
. \bo not set the temperature lower than the outside
air temperature. \boing so may cause the tem-
perature to not \fe controlled properly.
. If the windows fog up, use dehumidified heating
instead of the A/C off heating.
Dehumidified defrosting/defogging:
1. Push the front defogger “
” \futton. (The
“” indicator light will illuminate.)
2. Push the temperature control “
”/“” \fut-
ton to set the desired temperature.
. To remove frost from the outside surface of the
windshield quickly, set the temperature to a high
temperature and the fan speed to the maximum
level.
. After the windshield is cleared, push the front
defogger “
” \futton again. (The indicator light
will turn off.)
. When the front defogger “
” \futton is pushed,
the air conditioner will automatically turn on when
the outside air temperature is a\fove í28C (288F)
to defog the windshield. The air recirculation mode
will automatically turn off. The outside air circula-
tion mode “
” will \fe selected to improve the
defogging performance.
Manual operation
The manual mode can \fe used to control the heater
and air conditioner to your desired settings. (“MAN-
UAL” will appear on the display.)
To turn off the heater and air conditioner, push the
“OFF” \futton. Fan speed control:
Push the fan speed control “
”/“” \futton. Push
the “” \futton to increase the fan speed. Push the
“” \futton to decrease the fan speed.
Push the “AUTO” \futton to change the fan speed to
the automatic mode.
Air flow control:
Push the “MO\bE” \futton to change the air flow mode.
— Air flows from the center and side ventila- tors.
— Air flows from the center and side ventila-tors and foot outlets.
— Air flows mainly from the foot outlets
— Air flows from the defogger outlets and footoutlets.
Temperature control:
Push the temperature control “
”/“” \futton to
set the desired temperature. Push the “” \futton to
increase the temperature. Push the “” \futton to
decrease the temperature.
Outside air circulation:
Push the outside air circulation “
” \futton to draw
the air flow from outside the vehicle. (The “”
indicator light will illuminate.)
Air recirculation:
Push the air recirculation “
” \futton to circulate the
air flow inside the vehicle. (The “” indicator light
will illuminate.) Automatic air intake control:
If the indicator light on either the outside air circulation
“
” \futton or the air recirculation “” \futton is
illuminated, push the \futton with the light illuminated to
turn the light off. The automatic control is set \fetween
the outside air circulation “
” and air recirculation
“” modes.
SERVICING AIR CON\bITIONER
WARNING:
The air conditioner system contains refrigerant
under high pressure. To avoid personal injury,
any air conditioner service should be done only
by an experienced technician with the proper
equipment.
The air conditioner system in your vehicle is charged
with a refrigerant designed with the environment in
mind.
This refrigerant will not harm the earth’s ozone
layer. However, it may contri\fute in a small part to
glo\fal warming.
Special charging equipment and lu\fricant are required
when servicing your vehicle’s air conditioner. Using
improper refrigerants or lu\fricants will cause severe
damage to the air conditioner system. (See “Air
conditioner system refrigerant and lu\fricant” (P.9-4) .)
A RENAULT dealer will \fe a\fle to service your
environmentally friendly air conditioner system.
Heater and air conditioner, and audio system4-7
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-8Heater and air conditioner, and audio system
Air conditioner filter (if equipped)
\fhe air conditioner s\bstem is equipped with an air
conditioner filter which collects pollen. \fo make sure
the air conditioner heats defogs, and ventilates
efficientl\b, replace the filter according the specified
maintenance intervals listed in a separate maintenance
booklet. \fo replace the filter, contact a RENAUL\f
dealer.
\fhe filter should be replaced if the air flow decreases
significantl\b or if windows fog up easil\b when operating
the heater or air conditioner.AUDIO OPERA\fION PRECAU\fIONS
WARNING:
Do not adjust the audio system while driving so
that full attention may be given to vehicle
operation.
\fhe audio s\bstem operates when the ignition switch is
in the “ACC” or “ON” position.
Radio
.Radio reception is affected b\b station signal
strength, distance from radio transmitter, build-
ings, bridges, mountains and other external
influences. Intermittent changes in reception
qualit\b normall\b are caused b\b these external
influences.
. Using a cellular phone in or near the vehicle ma\b
influence radio reception qualit\b.
Compact Disc (CD) pla\ber
.During cold weather or rain\b da\bs, the pla\ber ma\b
malfunction due to the humidit\b. If this occurs,
remove the CD from CD pla\ber and dehumidif\b or
ventilate the pla\ber completel\b.
. \fhe pla\ber ma\b skip while driving on rough roads.
. \fhe CD pla\ber sometimes ma\b not function when
the passenger compartment temperature is ex-
tremel\b high. Lower the temperature before use.
. Do not expose the CD to direct sunlight.
. CDs that are of poor qualit\b, or are dirt\b,
scratched, covered with fingerprints, or that have
pin holes ma\b not work properl\b.
. \fhe following CDs ma\b not work properl\b.
— Cop\b control compact discs (CCCD) — Recordable compact discs (CD-R)
— Rewritable compact discs (CD-RW)
SAA0480
.
Do not use the following CDs as the\b ma\b cause
the CD pla\ber to malfunction.
— 8 cm (3.1 in) discs (except for FM-AM Radio
with Compact Disc Pla\ber (\f\bpe C))
— CDs that are not round
— CDs with a paper label
— CDs that are warped, scratched or have unusual edges.
AUDIO SYSTEM (if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
.This audio system can only play prerecorded CDs\f
It has no capabilities to record or burn CDs\f
. If the CD cannot be played\b one of the following
messages will be displayed\f
Check disc:
— Confirm that the CD is inserted correctly (the
label side is facing up\b etc\f) \f
— Confirm that the CD is not bent or warped and it is free of scratches\f
Push eject:
This is a malfunction due to the temperature inside
the player is too high\f Remove the CD by pushing
the EJECT button\b and after a short time reinsert
the CD\f The CD can be played when the
temperature of the player returns to normal\f
Unplayable:
The file is unplayable in this audio system (only
MP3 or WMA CD) \f
USB (Universal Serial Bus) (if equipped)
WARNING:
Do not connect, disconnect or operate the USB
device while driving. Doing so can be a distrac-
tion. If distracted you could lose control of your
vehicle and cause an accident or serious injury.
CAUTION:
. Do not force the USB device into the USB
port. Inserting the USB device tilted or up-
side-down into the port may damage the
port. Make sure that the USB device is
connected correctly into the USB port.
. Do not grab the USB port cover (if equipped)
when pulling the USB device out of the port. This could damage the port and the cover.
. Do not leave the USB cable in a place where
it can be pulled unintentionally. Pulling the
cable may damage the port.
The vehicle is not equipped with a USB device\f USB
devices should be purchased separately as necessary\f
This system cannot be used to format USB devices\f To
format a USB device\b use a personal computer\f
In some states/area\b the USB device for the front seats
plays only sound without images for regulatory
reasons\b even when the vehicle is parked\f
This system supports various USB memory devices\b
USB hard drives and iPod players\f Some USB devices
may not be supported by this system\f
. Partitioned USB devices may not be played
correctly\f
. Some characters used in other languages (Chi-
nese\b Japanese\b etc\f) are not displayed properly
on display\f Using English language characters
with a USB device is recommended\f
General notes for USB use:
Refer to your device manufacturer’s owner information
regarding the proper use and care of the device\f
Notes for iPod use:
iPod is a trademark of Apple Inc\f\b registered in the U\fS\f
and other countries\f
. Improperly plugging in the iPod may cause a
checkmark to be displayed on and off (flickering) \f
Always make sure that the iPod is connected
properly\f
. An iPod nano (1st Generation) may remain in fast
forward or rewind mode if it is connected during a
seek operation\f In this case\b please manually reset
the iPod\f .
An iPod nano (2nd Generation) will continue to
fast-forward or rewind if it is disconnected during
a seek operation\f
. An incorrect song title may appear when the Play
Mode is changed while using an iPod nano (2nd
Generation)
. Audiobooks may not play in the same order as
they appear on an iPod\f
. Large video files cause slow responses in an iPod\f
The vehicle center display may momentarily black
out\b but will soon recover\f
. If an iPod automatically selects large video files
while in the shuffle mode\b the vehicle center
display may momentarily black out\b but will soon
recover\f
BluetoothŠAudio player (if equipped)
.Some BluetoothŠaudio devices may not be used
with this system\f For detailed information about
Bluetooth
Šaudio devices that are available for use
with this system\b contact a RENAULT dealer\f
. Before using a Bluetooth
Šaudio system\b the initial
registration process for the audio device is
necessary\f
. Operation of the Bluetooth
Šaudio system may
vary depending on the audio device that is
connected\f Confirm the operation procedure
before use\f
. The playback of Bluetooth
Šaudio will be paused
under the following conditions\f The playback will
be resumed after the following conditions are
completed\f
— while using a Hands-free phone
— while checking a connection with a cellular phone
Heater and air conditioner, and audio system4-9
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-10Heater and air conditioner, and audio system
.The in-vehicle antenna for BluetoothŠco\f\fu-
nication is built in the syste\f\b Do not place the
Bluetooth
Šaudio device in an area surrounded by
\fetal, far away fro\f the syste\f or in a narrow
space where the device closely contacts the body
or the seat\b Otherwise, sound degradation or
connection interference \fay occur\b
. While a Bluetooth
Šaudio device is connected
through the BluetoothŠwireless connection, the
battery power of the device \fay discharge quicker
than usual\b
. This syste\f is co\fpatible with the Bluetooth
ŠAV
profile (A2DP and AVRCP) \b
BluetoothŠis a trade\fark owned
by Bluetooth SIG, Inc\b, and li-
censed to Daewoo IS Corp\b
Co\fpact Disc with MP3 or WMA (if
equipped)
Explanation of terms:
. MP3 — MP3 is short for Moving Pictures Experts
Group Audio Layer 3\b MP3 is the \fost well known
co\fpressed digital audio file for\fat\b This for\fat
allows for near “CD quality” sound, but at a
fraction of the size of nor\fal audio files\b MP3
conversion of an audio track fro\f CD can reduce
the file size by approxi\fately 10:1 ratio (Sa\fpling:
44\b1 kHz, Bit rate: 128 kbps) with virtually no
perceptible loss in quality\b MP3 co\fpression
re\foves the redundant and irrelevant parts of a
sound signal that the hu\fan ear doesn’t hear\b
. WMA — Windows Media Audio (WMA) is a
co\fpressed audio for\fat created by Microsoft as
an alternative to MP3\b The WMA codec offers
greater file co\fpression than the MP3 codec,
enabling storage of \fore digital audio tracks in the
sa\fe a\fount of space when co\fpared to MP3s at the sa\fe level of quality\b
. Bit rate — Bit rate denotes the nu\fber of bits per
second used by a digital \fusic files\b The size and
quality of a co\fpressed digital audio file is
deter\fined by the bit rate used when encoding
the file\b
. Sa\fpling frequency — The rate at which the
sa\fples of a signal are converted fro\f analog to
digital (A/D conversion) per second\b
. Multisession — Multisession is one of the \fethods
for writing data to \fedia\b Writing data once to the
\fedia is called a single session, and writing \fore
than once is called a \fultisession\b
. ID3/WMA Tag — The ID3/WMA tag is the part of
the encoded MP3 or WMA file that contains
infor\fation about the digital \fusic file such as
song title, artist, albu\f title, encoding bit rate,
track ti\fe duration, etc\b ID3 tag infor\fation is
displayed on the Albu\f/Artist/Song title line on
the display\b
* WindowsŠand Windows MediaŠare registered
trade\farks and trade\farks in the United States of
A\ferica and other countries of Microsoft Corporation
of the USA\b Playback order:
SAA1025Playback order chartThe \fusic playback order of the CD with MP3 or
WMA is as illustrated\b
.
The na\fes of folders not containing MP3 or WMA
files are not shown in the display\b
. If there is a file in the top level of the disc, “Root
Folder” is displayed\b
. The playback order is the order in which the files
were written by the writing software\b Therefore,
the files \fight not play in the desired order\b
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Specification chart (model with type A, B, C, D, E, F audio unit):Supported media CD, CD-R, CD-RW
Supported file \fy\ftem\f ISO\b660 LEVEL1, ISO\b660 LEVEL2, Romeo, Joliet
ISO\b660 Level 3 (packet writing) i\f not \fupported.
File\f \faved u\fing the Live File Sy\ftem component (on a Window\f Vi\fta-ba\fed computer)
are not \fupported.
Supported ver\fion\f*1 MP3
Ver\fion
MPEG1, MPEG2, MPEG2.5
Sampling frequency 8 kHz - 48 kHz
Bit rate 8 kbp\f - 320 kbp\f, VBR*4
WMA*3 Ver\fion
WMA7, WMA8, WMA\b
Sampling frequency 32 kHz - 48 kHz
Bit rate 32 kbp\f - 1\b2 kbp\f, VBR*4
Tag information (Song title and Arti\ft name) ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)
WMA tag (WMA only)
Folder level\f Folder level\f: 8, Folder\f: 255 (including route folder) , File\f: 512 (Max. 255 file\f for one
folder)
Di\fplayable character code\f*2 01: ASCII, 02: ISO-885\b-1, 03: UNICODE (UTF-16 BOM Big Endian) , 04: UNICODE
(UTF-16 Non-BOM Big Endian) , 05: UNICODE (UTF-8) , 06: UNICODE (Non-UTF-16
BOM Little Endian)
*1 File\f created with a combination of 48 kHz \fampling frequency and 64 kbp\f bit rate cannot be played.
*2 Available code\f depend on what kind of media, ver\fion\f and information are going to be di\fplayed.
*3 Protected WMA file\f (DRM) cannot be played.
*4 When VBR file\f are played, the playback time may not be di\fplayed correctly. WMA7 and WMA8 are not applied to VBR.
Heater and air conditioner, and audio system4-11
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-12Heater and air conditioner, and audio system
Specification chart (model with type G audio unit):Supported media CD, CD-R, CD-R\f, USB2.\b
Supported file systems CD, CD-R, CD-R\f: ISO966\b LEVEL1, ISO966\b LEVEL2, Romeo, Joliet
* ISO966\b Level 3 (packet writing) is not supported.
* Files saved using the Live File System component (on a \findows Vista-based computer) are
not supported.
USB memory device: FAT16, FAT32
Supported versions*1 MP3
Version
MPEG1 Audio Layer 3
Sampling frequency 8 kHz - 48 kHz
Bit rate 8 kbps - 32\b kbps, VBR*4
\fMA*2 Version
\fMA7, \fMA8, \fMA9
Sampling frequency 32 kHz - 48 kHz
Bit rate 32 kbps - 192 kbps, VBR*4
Tag information (Song title and Artist name) ID3 tag VER1.\b, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)
\fMA tag (\fMA only)
Folder levels CD, CD-R, CD-R\f
Folder levels: 8, Folders and files: 999 (Max. 255 files for one folder)
USB Folder levels: 8, Folders 255, Files: 25\b\b (Max. 255 files for one folder)
Memory size: 4GB
Displayable character codes*3 \b1: ASCII, \b2: ISO-8859-1, \b3: UNICODE (UTF-16 BOM Big Endian) , \b4: UNICODE (UTF-16
Non-BOM Big Endian) , \b5: UNICODE (UTF-8) , \b6: UNICODE (Non-UTF-16 BOM Little
Endian) , \b7: SHIFT-JIS
*1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.
*2 Protected \fMA files (DRM) cannot be played.
*3 Available codes depend on what kind of media, versions and information are going to be displayed.
*4 \fhen VBR files are played, the playback time may not be displayed correctly.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Troubleshooting guide (model with type A, B, C, D, E, F audio unit):Symptom Cause and Countermeasure
Cannot play Check i\f the disc was inserted correctly.
Check i\f the disc is scratched or dirty.
Check i\f there is condensation inside the player, and i\f there is, wait until the condensation is \bone (about 1 hour) be\fore usin\b the
player.
I\f there is a temperature increase error, the CD player will play correctly a\fter it returns to the normal temperature.
I\f there is a mixture o\f music CD \files (CD-DA data) , MP3/WMA \files on a CD, only the music CD \files (CD-DA data) will be played.
Files with extensions other than “.MP3”, “.WMA”, “.mp3” or “.wma” cannot be played. In addition, the character codes and number o\f
characters \for \folder names and \file names should be in compliance with the speci\fications.
Check i\f the disc or the \file is \benerated in an irre\bular \format. This may occur dependin\b on the variation or the settin\b o\f MP3/WMA
writin\b applications or other text editin\b applications.
Check i\f the \finalization process, such as session close and disc close, is done \for the disc.
Check i\f the disc is protected by copyri\bht.
Poor sound quality Check i\f the disc is scratched or dirty.
It takes a relatively lon\b time be\fore
the music starts playin\b. I\f there are many \folder or \file levels on the MP3/WMA disc, or i\f it is a multisession disc, some time may be required be\fore the music
starts playin\b.
Music cuts o\f\f or skips The writin\b so\ftware and hardware combination mi\bht not match, or the writin\b speed, writin\b depth, writin\b width, etc., mi\bht not
match the speci\fications. Try usin\b the slowest writin\b speed.
Skippin\b with hi\bh bit rate \files Skippin\b may occur with lar\be quantities o\f data, such as \for hi\bh bit rate data.
Move immediately to the next son\b
when playin\b. When a non-MP3/WMA \file has been \biven an extension o\f “.MP3”, “.WMA”, “.mp3, “.wma”, or when play is prohibited by copyri\bht
protection, there will be approximately 5 seconds o\f no sound and then the player will skip to the next son\b.
The son\bs do not play back in the
desired order. The playback order is the order in which the \files were written by the writin\b so\ftware, so the \files mi\bht not play in the desired order.
Heater and air conditioner, and audio system4-13
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-14Heater and air conditioner, and audio system
Troubleshooting guide (model with type G audio unit):Symptom Cause and Countermeasure
Cannot play Che\fk if the dis\f or \bSB memory devi\fe was inserted \forre\ftly.
Che\fk if the dis\f is s\frat\fhed or dirty.
Che\fk if there is \fondensation inside the player, and if there is, wait until the \fondensation is gone (about 1 hour) before
using the player.
If there is a temperature in\frease error, the player will play \forre\ftly after it returns to the normal temperature.
If there is a mixture of musi\f CD files (CD-DA data) and \fompressed audio files on a CD, only the musi\f CD files (CD-DA
data) will be played.
Files with extensions other than “.MP3 (.mp3)” or “.WMA (.wma)” \fannot be played. In addition, the \fhara\fter \fodes and
number of \fhara\fters for folder names and file names should be in \fomplian\fe with the spe\fifi\fations.
Che\fk if the dis\f or the file is generated in an irregular format. This may o\f\fur depending on the variation or the setting of
\fompressed audio writing appli\fations or other text editing appli\fations.
Che\fk if the finalization pro\fess, su\fh as session \flose and dis\f \flose, is done for the dis\f.
Che\fk if the dis\f or \bSB memory devi\fe is prote\fted by \fopyright.
Poor sound quality Che\fk if the dis\f is s\frat\fhed or dirty.
It takes a relatively long time before the musi\f
starts playing. If there are many folder or file levels on the dis\f or \bSB memory devi\fe, some time may be required before the musi\f
starts playing.
Musi\f \futs off or skips The writing software and hardware \fombination might not mat\fh, or the writing speed, writing depth, writing width, et\f.,
might not mat\fh the spe\fifi\fations. Try using the slowest writing speed.
Skipping with high bit rate files Skipping may o\f\fur with large quantities of data, su\fh as for high bit rate data.
Move immediately to the next song when playing. If an unsupported \fompressed audio file has been given a supported extension like .MP3, or when play is prohibited by
\fopyright prote\ftion, the player will skip to the next song.
The songs do not play ba\fk in the desired order. The playba\fk order is the order in whi\fh the files were written by the writing software, so the files might not play in the
desired order.
Random/Shuffle may be a\ftive on the audio system or on a \bSB memory devi\fe.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
ANTENNA (if equipped)
SAA0611
Adjus\f \fhe an\fenna an\ble for \fhe bes\f recep\fion.
Removin\b an\fenna
You can remove \fhe an\fenna if necessary.
Hold \fhe bo\f\fom of \fhe an\fenna and remove by \furnin\b
coun\ferclockwise.
To ins\fall \fhe an\fenna, \furn \fhe an\fenna clockwise and
\fi\bh\fen.
CAUTION:
.Be sure to fold down the antenna before the
vehicle enters a garage with a low ceiling.
. Be sure that antenna is removed before the
vehicle enters an automatic car wash.
Heater and air conditioner, and audio system4-15
&RQGLWLRQ