warning RENAULT PULSE 2012 1.G Owner's Guide


> (GLW    0RGHO .$2(0 B5HQDXOW @
2-20Instruments and controls
JVI0003X
The vehicle infor\fation di\bplay*1di\bplay\b the
warning\b and infor\fation.
INDICATORS FOR OPERATION
JVI0266X
1. Engine \btart operation indicator (AT/CVT
\fodel)
Thi\b indicator appear\b when the \belector lever i\b in the
“P” (Park) po\bition.
Thi\b indicator \fean\b that the engine will \btart by
pu\bhing the ignition \bwitch with the brake pedal
depre\b\bed. You can \btart the engine directly in any
po\bition.
2. Steering lock relea\be \falfunction indicator
Thi\b indicator appear\b when the \bteering wheel cannot
be relea\bed fro\f the “LOCK” po\bition.
If thi\b indicator appear\b, pu\bh the ignition \bwitch while
lightly turning the \bteering wheel right and left.
VEHICLE INFORMATION DISPLAY
(if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
3. NO KEY warning
This warning appears in either \ff the f\fll\fwing
c\fn\biti\fns.
No key inside the vehicle:
The warning appears when the \b\f\fr is cl\fse\b with the
Intelligent Key left \futsi\be the vehicle an\b the igniti\fn
switch in the “ACC” \fr “ON” p\fsiti\fn. Make sure that
the Intelligent Key is insi\be the vehicle.
Unregistered Intelligent Key:
The warning appears when the igniti\fn switch is
pushe\b fr\fm the “LOCK” p\fsiti\fn an\b the Intelligent
Key cann\ft be rec\fgnize\b by the system. Y\fu cann\ft
start the engine with an unregistere\b key. Use the
registere\b Intelligent Key.
See “Intelligent Key system” (P.3-9) f\fr m\fre \betails.
4. SHIFT “P” warning (AT/CVT m\f\bel)
This warning appears when the igniti\fn switch is
pushe\b t\f st\fp the engine with the select\fr lever in any
p\fsiti\fn except the “P” (Park) p\fsiti\fn.
If this warning appears, m\fve the select\fr lever t\f the
“P” (Park) p\fsiti\fn \fr push the igniti\fn switch t\f the
“ON” p\fsiti\fn.
An insi\be warning chime will als\f s\fun\b. (See
“Intelligent Key system” (P.3-9) .)
5. “PUSH” warning (AT/CVT m\f\bel)
This warning appears when the select\fr lever is m\fve\b
t\f the “P” (Park) p\fsiti\fn with the igniti\fn switch in the
“ACC” p\fsiti\fn after the SHIFT “P” warning appears.
T\f push the igniti\fn switch t\f the “OFF” p\fsiti\fn,
perf\frm the f\fll\fwing pr\fce\bure:
SHIFT“P”warning ?(M\fve the select\fr lever t\f
“P”) ?PUSH warning ?(Push the igniti\fn switch ?
igniti\fn switch p\fsiti\fn is turne\b t\f “ON”) ?PUSH warning
?(Push the igniti\fn switch ?igniti\fn
switch p\fsiti\fn is turne\b t\f “OFF”)
6. Intelligent Key battery \bischarge in\bicat\fr
This in\bicat\fr appears when the Intelligent Key battery
is running \fut \ff p\fwer.
If this in\bicat\fr appears, replace the battery with a new
\fne. (See “Battery” (P.8-23) .)
7. Engine start \fperati\fn in\bicat\fr (Manual
Transmissi\fn m\f\bels)
This in\bicat\fr means that the engine will start by
pushing the igniti\fn switch with the clutch pe\bal
\bepresse\b.
8. Cruise c\fntr\fl in\bicat\fr (f\fr Eur\fpe)
The cruise main switch in\bicat\fr (CRUISE) is \bis-
playe\b when the cruise c\fntr\fl main switch is pushe\b.
When the main switch is pushe\b again, the CRUISE
in\bicat\fr \bisappears. When the CRUISE in\bicat\fr is
\bisplaye\b, the cruise c\fntr\fl system is \fperati\fnal.
The cruise c\fntr\fl set in\bicat\fr (SET) is \bisplaye\b
while the vehicle spee\b is c\fntr\flle\b by the cruise
c\fntr\fl system. If the SET in\bicat\fr blinks while the
engine is running, it may in\bicate that the cruise c\fntr\fl
system is n\ft functi\fning pr\fperly. Have the system
checke\b by a RENAULT \bealer.
F\fr m\fre \betails, see “Cruise c\fntr\fl” (P.5-28) .
9. Spee\b limiter in\bicat\fr (f\fr Eur\fpe)
The spee\b limiter main switch in\bicat\fr (LIMIT) is
\bisplaye\b when the spee\b limiter main switch is
pushe\b. When the main switch is pushe\b again, the
LIMIT in\bicat\fr \bisappears.
The spee\b limiter set in\bicat\fr (SET) is \bisplaye\b while
the spee\b limiter is activate\b.
F\fr m\fre \betails, see “Spee\b limiter (if equippe\b f\fr Eur\fpe)” (P.5-26) .
10. Mechanical Key LOCK warning (if
equippe\b f\fr Eur\fpe)
The warning appears when the igniti\fn switch is left in
the “ACC” \fr “OFF” p\fsiti\fn instea\b \ff c\fmpletely
being turne\b t\f the “LOCK” p\fsiti\fn.
If this warning appears, turn the igniti\fn switch t\f the
“LOCK” p\fsiti\fn.
When the igniti\fn switch is in the “ON” p\fsiti\fn, a
buzzer will s\fun\b twice an\b the Mechanical Key LOCK
warning sh\fws when the igniti\fn switch is turne\b t\f
the “ACC” \fr “OFF” p\fsiti\fn. This is t\f warn the \briver
that the igniti\fn switch is n\ft in the “LOCK” p\fsiti\fn.
Make sure the select\fr lever is in the “P” (Park)
p\fsiti\fn (f\fr CVT m\f\bel) \fr the shift lever is in the “N”
(Neutral) p\fsiti\fn (f\fr MT m\f\bel) an\b then turn the
igniti\fn switch t\f the “LOCK” p\fsiti\fn.
CAUTION:
.
The steering wheel can only be locked when
the ignition switch is in the “LOCK” position
(if equipped) . Make sure the ignition switch
is in the “LOCK” position before leaving the
vehicle.
. The mechanical key can only be removed at
the “LOCK” position. Make sure the ignition
switch is in the “LOCK” position before
removing the mechanical key.
See “Igniti\fn switch (m\f\bel with\fut intelligent Key
system)” (P.5-5) f\fr further \betails.
Instruments and controls2-21
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
2-22Instruments and controls
WARNINGS AND ALERTS
JVI0032X
1\f Par\bing bra\be release warning
This warning appears when the vehicle speed is above
7 \bm/h (4 MPH) and the par\bing bra\be is applied\f
2\f Low fuel warning
This warning appears when the fuel level in the tan\b is
getting low\f Refuel as soon as it is convenient, before
the fuel gauge reaches the empty (0) position\f
There is a small reserve of fuel remaining in the
tank when the fuel gauge reaches the empty (0)
position.
3\f Door/bac\b door open warning (ignition
switch is in the ON position)
This warning appears if any of the doors or the bac\b
door is open or not closed securely\f The vehicle icon
indicates which door is open on the display\f Ma\be sure
that all of the doors and the bac\b door are closed\f
4\f “Time to rest” indicator
This indicator appears when the set “time to rest”
indicator activates\f You can set the time for up to 6
hours\f (See “Trip computer (for Type C)” (P\f2-25) \f)
5\f Low outside temperature warning
This warning appears if the outside temperature is 38C
or below\f The warning can be set not to be displayed\f
(See “Trip computer (for Type C)” (P\f2-25) \f)
6\f Seat belt warning light
When the ignition switch is in the “ON” position, the
seat belt warning light illuminates\f The light will
continue to illuminate until the front seat belt is
fastened\f (See “Seat belts” (P\f1-7) \f)
When the vehicle speed exceeds 15 \bm/h (10 MPH) ,
the light will blin\b and the chime will sound unless the
front seat belt is securely fastened\f The chime will
continue to sound for about 90 seconds until the seat
belt is fastened\f
7\f Small light indicator warning
The small light indicator warning illuminates when the
front clearance lights, instrument panel lights, rear
combination lights and license plate lights are on\f The
indicator warning turns off when the
is turned
off\f
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
8. Setting menu operation warning
The warning appears when you try to operate the
setting menu whi\fe driving. The setting menu can on\fy
\be entered if the vehic\fe is stationary.
INDICATORS FOR BIRTHDAY AND ANNIVERSARY
JVI0191X
1. Birthday message
This indicator appears when the set time comes. You
can adjust the date of the message. (See “Trip
computer (for Type C)” (P.2-25) .)
2. Anniversary message
This indicator appears when the set time comes. You
can adjust the date of the message. (See “Trip
computer (for Type C)” (P.2-25) .)
3. Wedding anniversary message
This indicator appears when the set time comes. You
can adjust the date of the message. (See “Trip
computer (for Type C)” (P.2-25) .)
Instruments and controls2-23
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
2. Auto start deactivation
If the engine sto\fs when the Sto\f/Start S\bstem is
activated, and will not start automaticall\b, the message
is shown.
3. S\bstem fault
If the Sto\f/Start S\bstem is activated, but does not
o\ferate correctl\b, the message is shown. Visit a
RENAULT dealer or qualified worksho\f.
4. Sto\f/Start S\bstem
If the Sto\f/Start S\bstem is deactivated using the Sto\f/
Start S\bstem OFF switch, the message is shown.
If the Sto\f/Start S\bstem is activated using the Sto\f/
Start S\bstem OFF switch, the "STOP/START ON"
message is shown.
TRIP COMPUTER (for T\b\fe C)
JVI0006X
Switches for the tri\f com\futer are located on the left
or right side of the combination meter \fanel. To
o\ferate the tri\f com\futer, \fush the switches as shownabove.
*AENTER switch
*BNEXT switch
When the ignition switch is \fushed to the ON \fosition,
modes of the tri\f com\futer can be selected b\b
\fushing the
switch*A.
Each time the
switch*Ais \fushed, the dis\fla\b
will change as follows:
CO2 saved (if equi\f\fed) ?Current fuel consum\ftion
? Average fuel consum\ftion and s\feed ?Ela\fsed
time and tri\f odometer (if equi\f\fed) ?Distance to
em\ft\b ?Outside air tem\ferature ?Idling sto\f (if
equi\f\fed) ?Setting ?Warning check
CO2 saved (if equi\f\fed)
JVI0268X
The CO2 saved mode shows the estimated quantit\b of
CO2 exhaust emissions \frevented b\b the Sto\f/Start
S\bstem ever\b time the engine is automaticall\b sto\f\fed.
For more information, see “Sto\f/Start S\bstem (CO2
savings ) (if equi\f\fed for Euro\fe)” (P.2-28) .
Current fuel consum\ftion (km/l or l/100 km or
MPG)
JVI0007X
The current fuel consum\ftion mode shows the current
fuel consum\ftion.
Average fuel consum\ftion (km/l or l/100 km
or MPG) and s\feed (km/h or MPH)
JVI0008X
Fuel consumption:
The average fuel consum\ftion mode shows the
average fuel consum\ftion since the last reset. Reset-
ting is done b\b \fushing the
switch*Bfor longer
than 1 second. (The average s\feed is also reset at the
same time.)
Instruments and controls2-25
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
2-26Instruments and controls
The display is updated every 30 se\fonds. \bt about the
first 500 m after a reset, the display shows “——”.
Speed:
The average speed mode shows the average vehi\fle
speed sin\fe the last reset. Resetting is done by
pushing the
swit\fh*Bfor longer than 1 se\fond.
(The average fuel \fonsumption is also reset at the
same time.)
The display is updated every 30 se\fonds. The first 30
se\fonds after a reset, the display shows “——”.
Elapsed time and trip odometer (km or
MILES)
JVI0033X
Elapsed time:
The elapsed time mode shows the time sin\fe the last
reset. The displayed time \fan be reset by pushing the
swit\fh*Bfor longer than 1 se\fond. (The trip
odometer is also reset at the same time.)
Trip odometer (if equipped) :
The trip odometer mode shows the distan\fe that the
vehi\fle has been driven sin\fe the last reset. Resetting
is done by pushing the
swit\fh*Bfor longer than
1 se\fond. (The elapsed time is also reset at the same
time.)
Distan\fe to empty (km or MILES)
JVI0010X
The distan\fe to empty (dte) mode provides you with an
estimation of the distan\fe that \fan be driven before
refueling. The dte is \fonstantly being \fal\fulated, based
on the amount of fuel in the fuel tank and the a\ftual fuel
\fonsumption.
The display is updated every 30 se\fonds.
The dte mode in\fludes a low range warning feature. If
the fuel level is low, the warning is displayed on the
s\freen.
When the fuel level drops even lower, the dte display
will \fhange to “——”.
. If the amount of fuel added is small, the
display just before the ignition switch is
pushed to the “OFF”position may continue
to be displayed.
. When driving uphill or rounding curves, the
fuel in the tank shifts, which may momenta-
rily change the display.
Outside air temperature (8C) (if equipped)
JVI0012X
The outside air temperature is displayed in 8C in the
range of í30 to 608C.
The outside air temperature mode in\fludes a low
temperature warning feature. If the outside air tem-
perature is 38 C or below, the warning “ICY” is
displayed on the s\freen.
The outside temperature sensor is lo\fated in front of
the radiator. The sensor may be affe\fted by road or
engine heat, wind dire\ftions and other driving \fondi-
tions. The display may differ from the a\ftual outside
temperature or the temperature displayed on various
signs or billboards.
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
Accumulated time and current saved fuel
consumption (ml (mililiter)) \fy Idling \btop
\bystem (if equipped for Thailand)
JVI0011XType A
JVC0021XType BTheswitch*Bis used in the setting mode to
select and decide a menu of Type A and B.
Accumulated time (Type A):
The Accumulated time mode shows the accumulated
time Idling \btop \bystem has \feen operated since the
last reset.
Resetting is done \fy pushing the
switch*Bfor
longer than 1 second. (The saved fuel is also reset at
the same time.) Current saved fuel consumption (Type A):
The Current saved fuel consumption mode shows the
current saved fuel consumption \fy Idling \btop \bystem
has \feen operated since the last reset.
Accumulated time (Type B):
The Accumulated time mode shows the accumulated
time Idling \btop \bystem has \feen operated since the
time the ignition switch was turned ON.
Resetting is done \fy pushing the
switch*Bfor
longer than 1 second. (The saved fuel is also reset at
the same time.)
Current saved fuel consumption (Type B):
The Current saved fuel consumption mode shows the
current saved fuel consumption \fy Idling \btop \bystem
has \feen operated since the time the ignition switch
was turned ON. \bee “Idling \btop \bystem (if equipped
for Thailand)” (P.5-19) .
\betting
JVI0013X
Setting cannot be made while driving. A mes-
sage “Setting can only be operated when
stopped” is also displayed on the vehicle
information display.
The
switch*Aandswitch*Bare used in the setting mode to select and set a menu.
SKIP:
Push the
switch*Ato move to the warning
check mode.
Push the
switch*Bto select other menus.
ALERT:
The alert menu can \fe set to notify the following items.
. TIMER
\belect this su\fmenu to specify when the "time to
rest" indicator activates.
. ICY
\belect this su\fmenu to display the low outside
temperature warning.
To return to the top page of the setting mode, select
“BACK”.
TIME SETTING (CURRENT TIME) :
. CURRENT TIME
Adjust the date and time (hour and minute) of the
clock on the meter.
TIME SETTING (Birthday and Anniversary):
The \firthday and anniversary message reminds you of
the anniversary or a \firthday the driver should
remem\fer.
. BIRTHDAY
\belect this su\fmenu to adjust the date of the
Birthday message.
. ANNIVER\bARY
\belect this su\fmenu to adjust the date of the
Anniversary message.
\belect the display image to set the desired display
image of the Anniversary message.
Instruments and controls2-27
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
2-28Instruments and controls
.WEDDING DAY
Select this s\fbmen\f t\b adj\fst the date \bf the
wedding day message.
MAINTENANCE:
The maintenance intervals \bf the f\bll\bwing items can
be set \br reset f\br the reminders.
. OIL
Select this s\fbmen\f t\b set \br reset the distance
f\br changing the engine \bil.
. FILTER
Select this s\fbmen\f t\b set \br reset the distance
f\br replacing the \bil filter.
. TIRE
Select this s\fbmen\f t\b set \br reset the distance
f\br replacing tires.
. OTHER
Select this s\fbmen\f and set \br reset the distance
f\br replacing items \bther than the engine \bil, \bil
filter and tires.
T\b ret\frn t\b the t\bp page \bf the setting m\bde, select
“BACK”.
OPTIONS (UNIT) (except for Hong Kong):
The \bpti\bn men\f bel\bw can be set t\b y\b\fr preference.
. UNIT
Select this s\fbmen\f t\b ch\b\bse the \fnit.
. LANGUAGE
Select this s\fbmen\f t\b ch\b\bse the display
lang\fage.
. STOP/START (if eq\fipped f\br E\fr\bpe)
Select this s\fbmen\f t\b ch\b\bse the CO2 savings
\br the engine st\bp time \fsing the St\bp/Start
System.
(See “St\bp/Start System (CO2 savings ) (if
eq\fipped f\br E\fr\bpe)” (P.2-28) .) T\b ret\frn t\b the t\bp page \bf the setting m\bde, select
“BACK”.
Warning check
JVI0014X
T\b see if there are any \bf the f\bll\bwing warnings and
c\brresp\bnding details, select this men\f.
.
Seat belt warning
. N\b key warning
. L\bw f\fel warning
. Parking brake release warning
. D\b\br/back d\b\br \bpen warning
SKIP:
P\fsh the
switch*At\b m\bve t\b the warning
check m\bde.
P\fsh the
switch*Bt\b select \bther men\fs.
ALERT:
This item is available \bnly when a warning is displayed.
Select this men\f t\b see the details \bf warnings.
Resetting displays
When the average f\fel c\bns\fmpti\bn, average speed,
elapsed time is displayed, p\fsh the trip c\bmp\fter
m\bde switch
*Af\br l\bnger than 3 sec\bnds. The
display \bf average f\fel c\bns\fmpti\bn, average speed,
elapsed time, trip \bd\bmeter, acc\fm\flated time (f\br
Idling St\bp System) and c\frrent saved f\fel c\bns\fmp-
ti\bn (f\br Idling St\bp System) will be reset at the same
time.
STOP/START SYSTEM (CO2 savings ) (if
eq\fipped f\br E\fr\bpe)
JVI0269XType A
JVI0270XType BThe CO2 savings and the engine st\bp time (f\br Type
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
WARNING:
In freezing temperatures, the washer fluid may
freeze on the windshield and obscure your
vision. Warm the windshield with the defogger
before you wash the windshield.
CAUTION:
.Do not operate the washer continuously for
longer than 30 seconds.
. Do not operate the washer if the window
washer fluid reservoir is empty.
WINDSHIELD WIPER AND WASHER
SWITCH
JVI0271\fType A (example)
JVI0034\fType B (example)Th\b windshi\bld wip\br and wash\br op\brat\b wh\bn th\b
ignition switch is in th\b “ON” position.
Wip\br op\bration
Th\b l\bv\br position “INT” or “”*1op\brat\bs th\b
wip\br int\brmitt\bntly.
. If \bquipp\bd, th\b int\brmitt\bnt op\bration can b\b
adjust\bd by turning th\b adjustm\bnt control knob,
(long\br)
*Aor (short\br)*B.
. If \bquipp\bd, th\b sp\b\bd of th\b int\brmitt\bnt op\bra-
tion vari\bs d\bp\bnding on th\b v\bhicl\b sp\b\bd.
Th\b l\bv\br position “AUTO”
*1op\brat\bs th\b rain
s\bnsing auto wip\br syst\bm (if \bquipp\bd) . (S\b\b “Rain-
s\bnsing auto wip\br syst\bm” (P.2-33) .)
Th\b l\bv\br position “LO” or “
”*2op\brat\bs th\b
wip\br at low sp\b\bd.
Th\b l\bv\br position “HI” or “
”*3op\brat\bs th\b
wip\br at high sp\b\bd.
To stop th\b wip\br op\bration, mov\b th\b l\bv\br up to th\b
“OFF” position.
Th\b l\bv\br position “MIST” or “
”*4op\brat\bs th\b
wip\br on\b sw\b\bp. Th\b l\bv\br automatically r\bturns to its
original position. If the windshield wiper operation is interrupted
by snow etc., the wiper may stop moving to
protect its motor. If this occurs, turn the wiper
switch to OFF and remove the snow etc. on and
around the wiper arms. In approximately 20
seconds, turn the switch ON again to operate
the wiper.
Wash\br op\bration
To op\brat\b th\b wash\br, pull th\b l\bv\br toward th\b back
of th\b v\bhicl\b*5until th\b d\bsir\bd amount of wash\br
fluid is spr\bad on th\b windshi\bld. Th\b wip\br will
automatically op\brat\b s\bv\bral tim\bs.
RAIN-SENSING AUTO WIPER SYSTEM (if
\bquipp\bd)
SIC4018Type A
Instruments and controls2-33
WIPER AND WASHER SWITCH
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
2-36Instruments and controls
SIC2475
The hazard indi\fator f\basher swit\fh operates with the
ignition swit\fh in any position ex\fept when the battery
is dis\fharged.
The hazard indi\fator f\basher is used to warn other
drivers when you have to stop or park under
emergen\fy \fonditions.
When the hazard indi\fator f\basher swit\fh is pushed, a\b\b
turn signa\b \bights wi\b\b f\bash. To turn off the hazard
indi\fator f\basher, push the hazard indi\fator f\basher
swit\fh again.
JVI0362X
The horn swit\fh operates with the ignition swit\fh in
any position ex\fept when the battery is dis\fharged.
When the horn swit\fh is pushed and he\bd, the horn wi\b\b
sound. Re\beasing the horn swit\fh wi\b\b \fease the horn
sound.
MANUAL WINDOWS (if equipped)
SIC4435
The side windows \fan be opened*1or \f\bosed*2by turning the hand \frank on ea\fh door.
POWER WINDOWS (if equipped)
WARNING:
.Make sure that all passengers have their
hands, etc. inside the vehicle before operat-
ing the power windows.
. Never leave children or adults who would
normally require the support of others alone
in the vehicle. They could unknowingly
activate switches or controls and inadver-
tently become involved in an accident.
The power windows operate when the ignition swit\fh
is in the “ON” position.
To open a window, push down the power window
swit\fh.
To \f\bose a window, pu\b\b up the power window swit\fh.
HAZARD INDICATOR FLASHER
SWITCH HORN
WINDOWS
&RQGLWLRQ