manual radio set RENAULT PULSE 2012 1.G Owners Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2012, Model line: PULSE, Model: RENAULT PULSE 2012 1.GPages: 352, PDF Size: 6.46 MB
Page 139 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
not taken out from the loading slot, the CD \fill
automatically be reloaded to the slot to \brotect the CD
(12 cm discs only) .
AUX button:
The AUX IN jack is located on the audio unit. The AUX
IN audio in\but jack acce\bts any standard analog audio
in\but such as from a \bortable cassette ta\be, CD \blayer,
MP3 \blayer or la\bto\b com\buters.
Push the AUX button to \blay a com\batible device \fhen
it is \blugged into the AUX IN jack.
CAUTION:
. Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
. Connect a stereo mini-plug (3.5 mm in
diameter) cable to the AUX IN jack. If a
monaural mini-plug cable is used, the audio
will not output correctly.
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display. .
For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio o\beration
SAA3123
The audio system o\berates \fhen the ignition s\fitch is
in the “ACC” or “ON” \bosition.
/button:
When the
/button is \bushed \fhile the audio
system is off, the audio system \fill turn on and the
radio \fill turn on.
When the
/button is \bushed \fhile another
audio source is \blaying, the another audio source \fill
turn off and the radio \fill turn on.
To change the radio bands, \bush the
/button
until the desired band (FM1, FM2, AM) is dis\blayed.
The FM stereo indicator, “ST” \fill dis\blay during FM
stereo rece\btion. When the stereo broadcast signal is
\feak, the radio \fill automatically change from stereo
to monaural rece\btion.
TUNE/FF·REW/FOLDER button:
When adjusting the broadcasting station frequency
manually, \bush the
orbutton until the desired
frequency is achieved.
When adjusting the broadcasting station frequency
automatically, \bush the
orbutton. When the
system detects a broadcasting station, it \fill sto\b at
the station.
SEEK UP/DOWN button:
When adjusting the broadcasting station frequency
automatically, \bush the
button. When the
system detects a broadcasting station, it \fill sto\b at
the station.
button:
When the
button is \bushed, the system \fill seek
and sto\b at the detected broadcasting station for 5
seconds, and then it \fill start to seek for the next
broadcasting station.
Push the
button in this 5-second \beriod to sto\b
seeking.
Radio memory button:
The audio system can store u\b to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
To store the station frequency:
1. Tune to the desired broadcasting station fre- quency by using the
orbutton.
2. Push and hold a memory button (1 - 6) until a bee\b sounds.
Heater and air conditioner, and audio system4-19
& R Q G L W L R Q
Page 143 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio operation
JVH0002X
\fhe audio s\bstem operates when the ignition switch is
in the “ACC” or “ON” position.
/button:
When the
/button is pushed while the audio
s\bstem is off, the audio s\bstem will turn on and the
radio will turn on.
When the
/button is pushed while another
audio source is pla\bing, the another audio source will
turn off and the radio will turn on.
\fo change the radio bands, push the
/button
until the desired band (FM1, FM2, or AM) is displa\bed.
\fhe FM stereo indicator, “S\f” will displa\b during FM
stereo reception. When the stereo broadcast signal is
weak, the radio will automaticall\b change from stereo
to monaural reception.
TUNE/FF·REW/FOLDER button:
When adjusting the broadcasting station frequenc\b
manuall\b, push the
orbutton until the desired
frequenc\b is achieved.
When adjusting the broadcasting station frequenc\b
automaticall\b, push the
orbutton. When the
s\bstem detects a broadcasting station, it will stop at
the station.
SEEK UP/DOWN button:
When adjusting the broadcasting station frequenc\b
automaticall\b, push the
button. When the
s\bstem detects a broadcasting station, it will stop at
the station.
button:
When the
button is pushed, the s\bstem will seek
and stop at the detected broadcasting station for 5
seconds, and then it will start to seek for the next
broadcasting station.
Push the
button in this 5-second period to stop
seeking.
Radio memory button:
\fhe audio s\bstem can store up to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
\fo store the station frequenc\b:
1. \fune to the desired broadcasting station fre- quenc\b b\b using the
orbutton.
2. Push and hold a memor\b button (1 - 6) until a beep sounds.
3. \fhe switch number and frequenc\b will appear on the displa\b when the memor\b is stored properl\b.
4. Perform steps 1 - 3 for all other memor\b buttons.
Push a memor\b button (1 - 6) to select a desired
memor\b.
If the batter\b cable is disconnected, or if the audio fuse
blows, the radio memor\b will be erased. In such a case,
reset the desired stations.
(Automatic Preset) button:
\fhe audio s\bstem can store up to 6 FM station
frequencies and 6 AM station frequencies.
\fo store the station frequenc\b automaticall\b, push and
hold the
button until a beep sounds. \fhe station
will be automaticall\b stored in the “AU\fO.P” memor\b.
\fhe displa\b indicates “AP-**”.
Heater and air conditioner, and audio system4-23
& R Q G L W L R Q
Page 148 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
4-28Heater and air conditioner, and audio system
*1*2*3*4*5*6Radio memory buttons:
The audio system can store u\f to 18 FM station
\brequencies (six in each o\b FM 1, FM 2 and FM T) , 6
MW and 6 LW station \brequencies.
To store the station \brequency manually:
1. Tune to the desired broadcasting station \bre- quency by using the
orbutton.
2. Push and hold a radio memory button
*1-*6until a bee\f sounds. (The radio mutes when the
memory button is \fushed.)
3. The channel indicator will dis\flay and the radio mute disengages, indicating that the memory is
stored \fro\ferly.
4. Per\borm ste\fs 1 - 3 \bor all other memory buttons.
I\b the battery cable is disconnected, or i\b the audio \buse
blows, the radio memory will be erased. In such a case,
reset the desired stations.
Radio data system (RDS)
Alternative Frequency (AF):
. The AF \bunction o\ferates in the FM (radio) and CD
modes.
. When the AF mode is set to “ON” in the user
setu\f menu mode, the AF indicator illuminates.
For activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
. Automatic switching function
This \bunction com\fares the strengths o\b the
signals o\b all the stations on the AF list and
selects the station with the o\ftimum rece\ftion
conditions.
. Program Information (PI) search
Program In\bormation (PI) search begins automati- cally i\b no suitable station is \bound with the above
automatic switching \bunction. The PI search
\bunction checks each RDS station with the same
PI code. During this time the sound is muted and
“PI SEARCH” is dis\flayed. The PI search o\fera-
tion sto\fs when a suitable station is \bound. I\b no
station is \bound once all the \brequencies have been
searched, the radio returns to the \frevious
\brequency.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
When EON data is being received, this enables
automatic retuning o\b other \freset stations on the
same network. Also, network linked services can
be used. The EON indicator turns on during the
rece\ftion o\b RDS EON stations in the FM mode.
RDS functions:
. Programme Service (PS) function (station
name display function)
When an RDS station is tuned in with seek or
manual tuning, the RDS data is received and the
Program Service (PS) name is dis\flayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION —EBU SPEC FOR
INFO)
When the radio receives PTY code 31 (an
emergency broadcast code) , the sound is inter-
ru\fted, the emergency broadcast is heard, and
“PTY31 ALARM” is dis\flayed. The volume level at
this time is the same as that \bor tra\b\bic announce-
ments. Once the emergency broadcast is \binished,
the unit immediately returns to the \frevious
source.
. REG (Regional) mode
Some local radio stations are linked together according to their region because they only o\b\ber
limited coverage due to their limited number o\b
transmitters. I\b the signal \brom one station be-
comes weak while you are driving around, RDS
mode will switch to another local station in the
region with a stronger signal.
When the REG mode is activated in the FM band
and the radio receiver is tuned to a local radio
station, it will kee\f receiving this radio station
without switching to another local station. For
activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
Traffic Announcement (TA):
. The TA \bunction o\ferates in the FM and CD
modes.
. The TA mode is turned on or o\b\b when the TA/
NEWS button is \fushed \bor less than 2 seconds.
. The TA mode o\ferates regardless o\b whether the
AF mode is on or o\b\b.
. “TA ON” is dis\flayed when the TA mode is turned
on, and the TA indicator turns on. “TA OFF” is
dis\flayed when the TA mode is turned o\b\b, and the
TA indicator turns o\b\b.
The \bollowing \bunctions o\ferate when the TA mode is
on:
. Traffic announcement interrupt function
When a tra\b\bic announcement is received, the
announcement is tuned in and the volume
increases to the set level.
Once the tra\b\bic announcement is \binished, the unit
returns to the source which was set be\bore the
tra\b\bic announcement started, and the volume
returns to the \frevious level. For EON stations,
the radio is interru\fted by another EON station
with tra\b\bic announcements.
The tra\b\bic announcement interru\ft mode is
& R Q G L W L R Q
Page 163 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
All the tracks on all of the CDs will be pla\fed in a
random order.
\bIX DISC:
The CD changer pla\fs all the tracks from one
disc once in a random order.
RPT ALL:
All the tracks of all the CDs will be pla\fed
continuousl\f in sequential order.
CD EJECT button:
When the
button is pushed for less than 1.5
seconds while CDs are loaded, the previousl\f pla\fed
CD will be ejected.
When the
button is pushed for less than 1.5
seconds while a CD is being pla\fed, the CD being
pla\fed will be ejected, and the next CD will be pla\fed.
When the
button is pushed for more than 1.5
seconds while CDs are loaded, all of the CDs in the
CD changer will be ejected.
If a CD is ejected b\f pushing the
button, and it is
not taken out from the loading slot within 15 seconds,
the CD will automaticall\f be reloaded into the slot to
protect the CD.
If an error message appears on the displa\f, push the
button.
When the ignition switch is in the “OFF” or “LOCK”
position, it is possible to eject all the CDs. However,
the audio unit will not be activated.
LW-\bW-F\b radio operation
JVH0045X
The audio s\fstem operates when the ignition switch is
in the “ACC” or “ON” position.
FM-AM button:
When the
button is pushed while the audio
s\fstem is off, the audio s\fstem and the radio will turn
on. When the
button is pushed while the CD
pla\fer is alread\f operating, it will automaticall\f turn off
and the radio will turn on.
To change the radio band, push the
button until
the preferred band appears.
F\b 1 ?F\b 2 ?F\b T ?\bW ?LW
During F\b reception, when the
button is pushed
for longer than 1.5 seconds, stations are searched for
and the 6 stations of the F\b T band. The sound is
muted until the auto store operation is completed,
upon which preset channel 1 is automaticall\f tuned in.
TUNE button:
When adjusting the broadcasting station frequenc\f
manuall\f, push the
button until the preferred
frequenc\f is obtained.
The frequenc\f changes in steps of 100 kHz on the F\b
band, 9 kHz on the \bW band, and 3 kHz on the LW
band.
SEEK button:
When adjusting the broadcasting station frequenc\f
automaticall\f, push the
button. When the
s\fstem detects a broadcasting station, it will stop at
that station.
*1*2*3*4*5*6Radio memory buttons:
The audio s\fstem can store up to 18 F\b station
frequencies (six in each of F\b 1, F\b 2 and F\b T) , 6
\bW and 6 LW station frequencies.
To store the station frequenc\f manuall\f:
1. Tune to the preferred broadcasting station fre- quenc\f b\f using the
orbutton.
2. Push and hold a radio memor\f button
*1-*6until a beep sounds. (The radio mutes when the
memor\f button is pushed.)
3. The channel indicator will be displa\fed and the radio mute will be cancelled, indicating that the
memor\f is stored properl\f.
4. Perform steps 1 - 3 for all other memor\f buttons.
If the batter\f cable is disconnected, or if the audio fuse
blows, the radio memor\f will be erased. If this occurs,
reset the desired stations.
Heater and air conditioner, and audio system4-43
& R Q G L W L R Q
Page 164 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
4-44Heater and air conditioner, and audio system
Radio data system (RDS)
Alternative Frequency (AF):
.The A\f fun\btion operates in the \fM (radio) and CD
modes.
. When the A\f mode is set to “ON” in the user
setup menu mode, the A\f indi\bator illuminates.
\for a\btivation or dea\btivation, use the MENU button.
(Details are explained later in this se\btion.)
. Automatic switching function
This fun\btion \bompares the strengths of the
signals of all the stations on the A\f list and
sele\bts the station with the optimum re\beption
\bonditions.
. Program Information (PI) search
Program Information (PI) sear\bh begins automati-
\bally if no suitable station is found with the above
automati\b swit\bhing fun\btion. The PI sear\bh
fun\btion \bhe\bks ea\bh RDS station with the same
PI \bode. During this time the sound is muted and
“PI SEARCH” is displayed. The PI sear\bh opera-
tion stops when a suitable station is found. If no
station is found on\be all the frequen\bies have been
sear\bhed, the radio returns to the previous
frequen\by.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
When EON data is being re\beived, this enables
automati\b retuning of other preset stations on the
same network. Also, network linked servi\bes \ban
be used. The EON indi\bator turns on during the
re\beption of RDS EON stations in the \fM mode. RDS functions:
.
Programme Service (PS) function (station
name display function)
When an RDS station is tuned in with seek or
manual tuning, the RDS data is re\beived and the
Program Servi\be (PS) name is displayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION —EBU SPEC FOR
INFO)
When the radio re\beives PTY \bode 31 (an
emergen\by broad\bast \bode) , the sound is inter-
rupted, the emergen\by broad\bast is heard, and
“PTY31 ALARM” is displayed. The volume level at
this time is the same as that for traffi\b announ\be-
ments. On\be the emergen\by broad\bast is finished,
the unit immediately returns to the previous
sour\be.
. REG (Regional) mode
Some lo\bal radio stations are linked together
a\b\bording to their region be\bause they only offer
limited \boverage due to their limited number of
transmitters. If the signal from one station be-
\bomes weak while you are driving around, RDS
mode will swit\bh to another lo\bal station in the
region with a stronger signal.
When the REG mode is a\btivated in the \fM band
and the radio re\beiver is tuned to a lo\bal radio
station, it will keep re\beiving this radio station
without swit\bhing to another lo\bal station. \for
a\btivation or dea\btivation, use the MENU button.
(Details are explained later in this se\btion.) . Traffic Announcement (TA):
.
The TA fun\btion operates in the \fM and CD
modes.
. The TA mode is turned on or off when the TA/
NEWS button is pushed for less than 2 se\bonds.
. The TA mode operates regardless of whether the
A\f mode is on or off.
. “TA ON” is displayed when the TA mode is turned
on, and the TA indi\bator turns on. “TA O\f\f” is
displayed when the TA mode is turned off, and the
TA indi\bator turns off.
The following fun\btions operate when the TA mode is
on:
. Traffic announcement interrupt function
When a traffi\b announ\bement is re\beived, the
announ\bement is tuned in and the volume
in\breases to the set level.
On\be the traffi\b announ\bement is finished, the unit
returns to the sour\be whi\bh was set before the
traffi\b announ\bement started, and the volume
returns to the previous level. \for EON stations,
the radio is interrupted by another EON station
with traffi\b announ\bements.
The traffi\b announ\bement interrupt mode is
\ban\belled if the TA/NEWS button is pushed
during a traffi\b announ\bement. The TA mode
returns to the standby mode and the audio unit
returns to the previous sour\be.
News mode
When the NEWS button is pushed or the TA/NEWS
button is pushed for longer than 2 se\bonds in the \fM
mode, the news fun\btion is a\btivated. “NEWS” is
displayed for 3 se\bonds and the NEWS indi\bator
appears on the display.
When the news fun\btion is a\btivated, the radio
re\beives a news \bode from the \fM broad\basting news
& R Q G L W L R Q
Page 169 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
4. Push the TUNE/MENU/ENTER dial t\f access thef\flder. Push the TUNE/MENU/ENTER dial a\bain
t\f start playin\b the first track \fr turn the TUNE/
MENU/ENTER dial, and push the TUNE/MENU/
ENTER dial t\f select an\fther track.
If the current selected f\flder c\fntains sub f\flders, push
the TUNE/MENU/ENTER dial, and a new screen with a
list \ff sub f\flders will be displayed. Turn the TUNE/
MENU/ENTER dial t\f hi\bhli\bht the sub f\flder then
push the TUNE/MENU/ENTER dial t\f access the sub-
f\flder. Select the r\f\ft f\flder item when s\fn\bs are
rec\frded additi\fnally in the r\f\ft f\flder.
T\f return t\f the previ\fus f\flder screen, push the
butt\fn.
RPT button:
Push the
butt\fn and the current track will be
played c\fntinu\fusly.
MIX button:
Push the
butt\fn and all the tracks will be played in
rand\fm \frder.
DISP button:
While a CD with rec\frded music inf\frmati\fn ta\bs (CD-
text/ID3-text ta\bs) is bein\b played, the title \ff the
played track is displayed. If the title inf\frmati\fn is n\ft
pr\fvided then “Track” is displayed.
When the
butt\fn is pushed repeatedly, further
inf\frmati\fn ab\fut the track can be displayed al\fn\b
with the track title as f\fll\fws:
CD:
Track time ?Artist ?S\fn\b ?Album ?Track time
CD with MP3/WMA: Track time
?Artist ?Album ?F\flder name ?Track
time
Track details:
By pushin\b and h\fldin\b the
butt\fn will turn the
display will sh\fw a detailed \fverview and after a few
sec\fnds will return t\f the main display. Push the
butt\fn t\f return t\f the main display immediately.
CD Eject button:
When the
butt\fn is pushed while a CD is l\faded,
the CD will be ejected.
When the
butt\fn is pushed twice, the CD will be
ejected further, s\f that the CD can be rem\fved with
ease.
When the i\bniti\fn switch is in the “OFF” \fr “LOCK”
p\fsiti\fn it is p\fssible t\f eject the CD currently bein\b
played. H\fwever the audi\f unit will n\ft be activated.
If a CD is ejected by pushin\b the
butt\fn, and it is
n\ft rem\fved fr\fm the l\fadin\b sl\ft f\fr s\fme time, the
CD will aut\fmatically be rel\faded t\f the sl\ft t\f pr\ftect
the CD.
FM-AM radi\f \fperati\fn
The audi\f system \fperates when the i\bniti\fn switch is
in the “ACC” \fr “ON” p\fsiti\fn.
FM·AM band select button:
When the
butt\fn is pushed while the audi\f
system is turned \fff, the audi\f system will turn \fn and
the radi\f will turn \fn.
When the
butt\fn is pushed while an\fther audi\f
s\furce is playin\b, the \fther audi\f s\furce will turn \fff
and the radi\f will turn \fn.
T\f chan\be the radi\f band, push the
butt\fn until the desired band appears.
FM 1
?FM 2 ?FM T ?AM ?FM 1
Durin\b FM recepti\fn, when the
butt\fn is pushed
f\fr l\fn\ber than 1.5 sec\fnds, stati\fns are searched f\fr
and the 6 stati\fns \ff the FM T band are tuned in.
Durin\b the search, the n\ftificati\fn messa\be “AUTO-
STORE” appears in the display and the s\fund is muted
until the aut\fst\fre \fperati\fn is c\fmpleted, up\fn which
preset channel 1 is aut\fmatically tuned in.
TUNE/MENU/ENTER dial:
When adjustin\b the br\fadcastin\b stati\fn frequency
manually, turn the TUNE/MENU/ENTER dial until the
preferred frequency is achieved.
The frequency chan\bes in steps \ff 100 kHz \fn the FM
band and 9 kHz \fn the AM band.
Fast Forward/Rewind buttons:
When adjustin\b the br\fadcastin\b stati\fn frequency
aut\fmatically, push the
/butt\fn. When the
system detects a br\fadcastin\b stati\fn, it will st\fp at
the stati\fn.
*1*2*3*4*5*6(Radio memory) buttons:
Durin\b radi\f recepti\fn, pushin\b the radi\f mem\fry
butt\fn f\fr less than 2 sec\fnds will select the st\fred
radi\f stati\fn.
The audi\f system can st\fre up t\f 18 FM stati\fn
frequencies (six in each \ff FM 1, FM 2 and FM T) and 6
AM stati\fn frequencies.
T\f st\fre the stati\fn frequency manually:
1. Tune t\f the desired br\fadcastin\b stati\fn fre- quency by usin\b the
/butt\fn.
Heater and air conditioner, and audio system4-49
& R Q G L W L R Q
Page 173 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
displayed (top left of the display): Signal strength
()\f Battery status* () and Bluetooth Š\bON”
().
*: If the low battery message comes on\f the Bluetooth Š
device must be recharged soon.
The pairing procedure and operation may vary
according to device type and compatibility. See the
owner’s manual of the Bluetooth
Šdevice for further
details.
Select Device:
The paired device list shows which Bluetooth
Šaudio
or cellular phone devices have been paired or
registered with the Bluetooth
Šaudio system. If the list
contains devices\f select the appropriate device to
connect to the Bluetooth
Šaudio system.
The following symbols indicate the capability of the
registered device:
.
: cellular phone integration
.
: Audio streaming (A2DP- Advanced Audio
Distribution Profile)
Delete Device:
A registered device can be removed from the Blue-
tooth
Šaudio system. Select a registered device then
push the TUNE/MENU/ENTER dial to confirm deletion.
Bluetooth:
If Bluetooth
Šhas been switched off\f a notification
message On/Off appears when you select \bBluetooth”
from the setup menu screen\f or push the
button.
To turn the Bluetooth Šsignal on\f push the TUNE/
MENU/ENTER dial and a follow up screen will appear.
Select \bOn” and push the TUNE/MENU/ENTER dial to
display the Bluetooth
Šsettings menu screen. Bluetooth
Šaudio streaming main operation:
Place the ignition switch in the \bACC” or \bON”
position. If the audio system is turned off while the
Bluetooth
Šaudio is playing\f pushing thedial will
start Bluetooth Šaudio streaming.
AUX button:
To operate Bluetooth Šaudio streaming use one of the
following methods:
. Push the
button\f then turn the TUNE/MENU/
ENTER dial to highlight BT Audio\f and push the
TUNE/MENU/ENTER dial.
. Push the
button repeatedly until BT Audio is
highlighted\f then push the TUNE/MENU/ENTER
dial.
The type of display\f
*Aor*B\f shown on the audio
system can vary depending on the Bluetooth Šversion
of the device.
Fast Forward/Rewind buttons:
Fast Forward\f Fast Reverse:
When the
/button is pushed continuously\f
the track will be played at high speed. When the button
is released\f the track will be played at normal playing
speed.
Track up/down: By pushing the
/button once\f the track will
be skipped forward to the next track or backward to
the beginning of the current played track. Push the
/button more than once to skip through the
tracks.
DISP button:
If the song contains music information tags (ID3-tags) \f
the title of the played song will be displayed. If tags are
not provided\f the display will not show any messages.
When the
button is pushed repeatedly\f further
information about the song can be displayed along
with the song title.
By pushing and holding the
button the display will
show a detailed overview which after a few seconds
will return to the main display. Push the
button
briefly to return to the main display immediately.
Radio Broadcast data system (RBDS)
The RBDS is a system through which encoded digital
information is transmitted by FM radio stations in
addition to the normal FM radio broadcasting. The
RBDS provides information services such as station
name\f traffic information\f and news.
NOTE:
In some countries or regions, some of these
services may not be available.
Alternative Frequency (AF) mode:
The AF mode operates in the FM (radio) mode.
. The AF mode operates both in the FM (radio) and
CD mode (if FM was previously selected in the
radio mode) .
. The AF function compares signal strengths and
selects the station with the optimum reception
conditions for the currently tuned-in station.
Heater and air conditioner, and audio system4-53
& R Q G L W L R Q
Page 175 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
JVH0005XType B1. SOURCE select s\fitch
2. V\blume c\bntr\bl s\fitch
3. Tuning s\fitch
The audi\b system can be \bperated using the c\bntr\bls
\bn the steering \fheel.
SOURCE select s\fitch
Push the SOURCE select s\fitch t\b change the m\bde
t\b available audi\b s\burce.
V\blume c\bntr\bl s\fitch
Push up \br d\b\fn the v\blume c\bntr\bl s\fitch t\b increase
\br decrease the v\blume.
Tuning s\fitch
Memory change (radio):
Push the tuning s\fitch f\br less than 1.5 sec\bnds t\b
change the next \br previ\bus radi\b preset.
SEEK tuning (radio):
Push the tuning s\fitch f\br m\bre than 1.5 sec\bnds t\b
seek the next \br previ\bus radi\b stati\bn. APS (Automatic Program Search) FF, APS REW
(CD):
Push the tuning s\fitch f\br less than 1.5 sec\bnds t\b
return t\b the beginning \bf the present pr\bgram \br skip
t\b the next pr\bgram. Push several times t\b skip back \br
skip thr\bugh pr\bgrams.
This system searches f\br the blank intervals bet\feen
selecti\bns. If there is a blank interval \fithin \bne
pr\bgram \br there is n\b interval bet\feen pr\bgrams,
the system may n\bt st\bp in the desired \br expected
l\bcati\bn.
Type A:
JVH0007X
The USB/AUX c\bnnect\br is \bn the l\b\fer center \bf the
instrument panel.
F\br details, see the separately pr\bvided Navigati\bn
O\fner’s Manual.
Type B:
JVH0731X
The USB/AUX c\bnnect\br is l\bcated \bn the instrument
panel. F\br details, see “USB mem\bry device \bperati\bn”
(P.4-50) , “iP\bd player \bperati\bn” (P.4-50) \br “Audi\b
main \bperati\bn” (P.4-47) .
Heater and air conditioner, and audio system4-55
USB/AUX CONNECTOR (if
equipped)
& R Q G L W L R Q
Page 176 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
4-56Heater and air conditioner, and audio system
When installing a CB, ham ra\fio or a car phone in \bour
vehicle, be sure to observe the following cautions,
otherwise the new equipment ma\b a\fversel\b affect the
Engine Control S\bstem an\f other electronic parts.
CAUTION:
.Keep the antenna as far away as possible
from the Electronic Control Module.
. Keep the antenna wire at least 20 cm (8 in)
away from the Engine Control harnesses. Do
not route the antenna wire next to any
harnesses.
. Adjust the antenna standing wave ratio as
recommended by the manufacturer.
. Connect the ground wire from the radio
chassis to the body.
. For details, consult a RENAULT dealer.
WARNING:
.Use a phone after stopping your vehicle in a
safe location. If you have to use a phone
while driving, exercise extreme caution at all
times so full attention may be given to
vehicle operation.
. If a conversation in a moving vehicle re-
quires you to take notes, pull off the road to
a safe location and stop your vehicle before
doing so.
CAUTION:
To avoid draining the vehicle battery, use a
phone after starting the engine.
For mo\fel with navigation s\bstem, see the separatel\b
provi\fe\f Navigation Owner’s Manual.
Your vehicle is equippe\f with the Bluetooth
ŠHan\fs-
Free Phone S\bstem. If \bou are an owner of a
Bluetooth
Šenable\f cellular phone, \bou can set up
the wireless connection between \bour cellular phone
an\f the in-vehicle phone mo\fule. With Bluetooth
Š
wireless technolog\b, \bou can make or receive a han\fs-
free telephone call with \bour cellular phone in the
vehicle.
Once \bour cellular phone is paire\f to the in-vehicle
phone mo\fule, no other phone connecting proce\fure
is require\f. Your phone is automaticall\b connecte\f with
the in-vehicle phone mo\fule when the ignition switch
is place\f in the “ON” position with the paire\f cellular
phone turne\f on an\f carrie\f in the vehicle.
You can register up to 5 \fifferent Bluetooth
Šcellular
phones to the in-vehicle phone mo\fule. However, \bou
can talk on onl\b one cellular phone at a time.
Before using the Bluetooth
ŠHan\fs-Free Phone S\bstem, refer to the following notes.
.
Set up the wireless connection between a cellular
phone an\f the in-vehicle phone mo\fule before
using the s\bstem.
. Some Bluetooth
Šenable\f cellular phones ma\b not
be recognize\f b\b the in-vehicle phone mo\fule.
. You will not be able to use a han\fs-free phone
un\fer the following con\fitions.
— Your vehicle is outsi\fe of the telephone service
area.
— Your vehicle is in an area where it is \fifficult to receive ra\fio waves; such as in a tunnel, in an
un\fergroun\f parking garage, near a tall buil\f-
ing or in a mountainous area.
— Your cellular phone is locke\f to prevent it from being \fiale\f.
When the ra\fio wave con\fition is not i\feal or ambient
soun\f is too lou\f, it ma\b be \fifficult for the other part\b
to hear \bour voice \furing a call. Please close the
win\fows if possible.
Do not place the cellular phone in an area surroun\fe\f
b\b metal or far awa\b from the in-vehicle phone mo\fule
to prevent tone qualit\b \fegra\fation an\f wireless
connection \fisruption.
While a cellular phone is connecte\f through the
Bluetooth
Šwireless connection, the batter\b power of
the cellular phone ma\b \fischarge quicker than usual.
The Bluetooth
ŠHan\fs-Free Phone S\bstem cannot
charge cellular phones.
Refer to the cellular phone Owner’s Manual regar\fing
the telephone charges, cellular phone antenna an\f
bo\f\b, etc.
This wireless han\fs-free s\bstem is base\f on Blue-
tooth
Štechnolog\b.
CAR PHONE OR CB RADIO Bluetooth
ŠHANDS-FREE PHONE
SYSTEM (if equipped for model
without navigation system)
& R Q G L W L R Q
Page 183 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
.make a call via voice dialling by pushing thebutton \for more than 2 seconds then say
the voice tag clearly.
\bANDS-FREE TELEP\bONE OPERATION
(Type B)
JV\b0519X
Buttons:
1. Phone button
2. A-Z button
3. TUNE/MENU/ENTER dial
4. SETUP button
Microphone:
The microphone is located near the map light.
WARNING:
While driving, using the cellular phone is ex-
tremely dangerous because it significantly im-
pairs your concentration and diminishes your
reaction capabilities to sudden changes on the
road, and it may lead to a fatal accident. This
applies to all phone call situations such as when
receiving an incoming call, during a phone
conversation, when calling through the phone
book search, etc.
CAUTION:
Certain country or region jurisdictions prohibit
the use of the cellular phone in the car without
hands-free support.
This chapter provides in\formation about the RENAULT
hands-\free phone system using a Bluetooth
Šconnec-
tion.
Bluetooth
Šis a wireless radio communication stan-
dard. This system o\f\fers a hands-\free \feature \for your
cellular phone to enhance driving com\fort.
In order to use your cellular phone with the Bluetooth
Š
o\f the audio system, the cellular phone must \first be set
up. Once it has been set up, the hands-\free mode is
automatically activated on the registered cellular phone
(via Bluetooth
Š) when it comes into range.
A noti\fication message appears on the audio display
when the phone is connected, when an incoming call
is being received, as well as when a call is initiated.
When a call is active, the audio system and
microphone (located near the map light) enable
hands-\free communication.
I\f the audio system is in use at the time, the radio, CD,
or AUX source mode will be muted and will stay muted
until the active call has ended.
The Bluetooth
Šsystem may not be able to connect
with your cellular phone \for the \following reasons:
. The cellular phone is too \far away \from the vehicle.
. The Bluetooth
Šmode on the cellular phone has
not been activated.
. The cellular phone has not been paired with the
Bluetooth
Šsystem o\f the audio unit.
. The cellular phone does not support Bluetooth Š
technology (BT Core v1.2, \bands Free Pro\file v1.0
and Object Push Pro\file v1.0) . NOTE:
For details, see the cellular phone’s owner’s
manual.
\bands-\free phone setup
To set up the Bluetooth Šsystem to pair with (connect
or register) a pre\ferred cellular phone, push the
button, select the Bluetooth Škey, and then push the
TUNE/MENU/ENTER dial. It is also possible to display
the set up menu directly by pushing the
button.
. Pair Device
Bluetooth
Šcellular phones can be paired with the
system. A maximum o\f 5 cellular phones can be
registered.
. Select Device
Paired Bluetooth
Šcellular phones are listed on the
display and can be selected \for connection.
. Delete Device
A registered Bluetooth
Šcellular phone can be
deleted.
. Bluetooth
I\f this setting is turned o\f\f, the connection between
the Bluetooth
Šdevices and the in-vehicle Blue-
tooth Šmodule will be cancelled.
When success\fully paired, a noti\fication message will
be displayed. During the connection the \following
status icons will be displayed (top le\ft o\f display):
Signal strength (
) , Battery status () and
Bluetooth Š().
*: I\f the low battery message comes on, the Bluetooth Š
device must be recharged soon.
Heater and air conditioner, and audio system4-63
& R Q G L W L R Q