tire type RENAULT PULSE 2012 1.G Owners Manual


> (GLW    0RGHO .$2(0 B5HQDXOW @
2. Adjust the seat belt length. To shorten, hold thetongue and \full the u\f\fer belt as illustrated*1.
To lengthen, hold the tongue and \full the under
belt as illustrated
*2.
SSS0\b50
3. Position the la\f belt \fortion low and snug on the
hi\fs as shown.
Unfastening seat belts
Push the button on the buckle.
SEAT BELT MAINTENANCE
Periodically check that the seat belt and all the metal
com\fonents, such as buckles, tongues, retractors,
flexible wires and anchors, work \fro\ferly. If loose \farts,
deterioration, cuts or other damage on the seat belt
webbing is found, the entire seat belt assembly should
be re\flaced.
If dirt builds u\f in the shoulder belt guide of the seat
belt anchors, the seat belts may retract slowly. Wi\fe
the shoulder belt guide with a clean, dry cloth.
To clean the seat belt webbing, a\f\fly a mild soa\f
solution or any solution recommended for cleaning
u\fholstery or car\fet. Then wi\fe with a cloth and allow
the seat belts to dry in the shade. Do not allow the seat
belts to retract until they are com\fletely dry.
PRECAUTIONS ON CHILD RESTRAINT
USAGE
SSS0099
WARNING:
.Infants and small children should never be
carried on your lap. It is not possible for even
the strongest adult to resist the forces of a
severe accident. The child could be crushed
between the adult and parts of the vehicle.
Also, it is dangerous to put a seat belt
around a child being carried on the occu-
pant’s lap.
. Infants and children need special protection.
The vehicle’s seat belts may not fit them
properly. The shoulder belt may come too
close to the face or neck. The lap belt may
not fit over their small hip bones. In an
accident, an improperly fitting seat belt
could cause serious or fatal injury.
. Infants and small children should always be
placed in an appropriate child restraint
system while riding in the vehicle. Failure
to use a child restraint system can result in
serious injury or death. .
Child restraint systems specially designed
for infants and small children are available
from several manufacturers. When selecting
any child restraint systems, place your child
in the child restraint system and check the
various adjustments to be sure that the child
restraint system is compatible with your
child. Always follow the manufacturer’s in-
structions for installation and use.
. RENAULT recommends that the child re-
straint system be installed in the rear seat.
According to accident statistics, children are
safer when properly restrained in the rear
seat rather than in the front seat.
. Follow all of the child restraint system
manufacturer’s instructions for installation
and use. When purchasing a child restraint
system, be sure to select one which will fit
your child and vehicle. It may not be possible
to properly install some types of child
restraint systems in your vehicle.
. For a front-facing child restraint system,
check to make sure the shoulder belt does
not fit close to child’s face or neck. If it does,
put the shoulder belt behind the child
restraint system.
. Never install a rear-facing child restraint
system in the front seat. An inflating supple-
mental front-impact air bag could seriously
injure or kill your child. A rear-facing child
restraint system must only be used in the
rear seat.
. Adjustable seatbacks should be positioned
to fit a child restraint system, but as upright
as possible.
Safety — seats, seat belts and supplemental restraint system1-13
CHILD RESTRAINTS
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
2-24Instruments and controls
INDICATORS FOR MAINTENANCE
JVI0005\f
1. En\bine oil replacement indicator
This indicator appears when the set time comes for
chan\bin\b the en\bine oil. You can set or reset the
distance for chan\bin\b the en\bine oil. (See “Trip
computer (for Type C)” (P.2-25) .)
2. Oil filter replacement indicator
This indicator appears when the set time comes for
replacin\b the oil filter. You can set or reset the distance
for replacin\b the oil filter. (See “Trip computer (for Type
C)” (P.2-25) .)
3. Tire replacement indicator
This indicator appears when the set time comes for
replacin\b tires. You can set or reset the distance for
replacin\b tires. (See “Trip computer (for Type C)” (P.2-
25) .)
4. “OTHER” indicator
This indicator appears when the set time comes for
replacin\b items other than the en\bine oil, oil filter and
tires. You can set or reset the distance for replacin\b the
items. (See “Trip computer (for Type C)” (P.2-25) .)
INDICATORS FOR STOP/START SYSTEM
(if equipped for Europe)
JVI0267\f
1. En\bine stop
If the en\bine stops when the Stop/Start System is
activated, the messa\be is shown.
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
2-28Instruments and controls
.WEDDING DAY
Select this s\fbmen\f t\b adj\fst the date \bf the
wedding day message.
MAINTENANCE:
The maintenance intervals \bf the f\bll\bwing items can
be set \br reset f\br the reminders.
. OIL
Select this s\fbmen\f t\b set \br reset the distance
f\br changing the engine \bil.
. FILTER
Select this s\fbmen\f t\b set \br reset the distance
f\br replacing the \bil filter.
. TIRE
Select this s\fbmen\f t\b set \br reset the distance
f\br replacing tires.
. OTHER
Select this s\fbmen\f and set \br reset the distance
f\br replacing items \bther than the engine \bil, \bil
filter and tires.
T\b ret\frn t\b the t\bp page \bf the setting m\bde, select
“BACK”.
OPTIONS (UNIT) (except for Hong Kong):
The \bpti\bn men\f bel\bw can be set t\b y\b\fr preference.
. UNIT
Select this s\fbmen\f t\b ch\b\bse the \fnit.
. LANGUAGE
Select this s\fbmen\f t\b ch\b\bse the display
lang\fage.
. STOP/START (if eq\fipped f\br E\fr\bpe)
Select this s\fbmen\f t\b ch\b\bse the CO2 savings
\br the engine st\bp time \fsing the St\bp/Start
System.
(See “St\bp/Start System (CO2 savings ) (if
eq\fipped f\br E\fr\bpe)” (P.2-28) .) T\b ret\frn t\b the t\bp page \bf the setting m\bde, select
“BACK”.
Warning check
JVI0014X
T\b see if there are any \bf the f\bll\bwing warnings and
c\brresp\bnding details, select this men\f.
.
Seat belt warning
. N\b key warning
. L\bw f\fel warning
. Parking brake release warning
. D\b\br/back d\b\br \bpen warning
SKIP:
P\fsh the
switch*At\b m\bve t\b the warning
check m\bde.
P\fsh the
switch*Bt\b select \bther men\fs.
ALERT:
This item is available \bnly when a warning is displayed.
Select this men\f t\b see the details \bf warnings.
Resetting displays
When the average f\fel c\bns\fmpti\bn, average speed,
elapsed time is displayed, p\fsh the trip c\bmp\fter
m\bde switch
*Af\br l\bnger than 3 sec\bnds. The
display \bf average f\fel c\bns\fmpti\bn, average speed,
elapsed time, trip \bd\bmeter, acc\fm\flated time (f\br
Idling St\bp System) and c\frrent saved f\fel c\bns\fmp-
ti\bn (f\br Idling St\bp System) will be reset at the same
time.
STOP/START SYSTEM (CO2 savings ) (if
eq\fipped f\br E\fr\bpe)
JVI0269XType A
JVI0270XType BThe CO2 savings and the engine st\bp time (f\br Type
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
3-12Pre-driving checks and adjustments
.When the Intelligent Key is placed inside of
the glove box.
. When the Intelligent Key is placed inside of
the door pockets.
. When the Intelligent Key is placed on or
under the spare tire area.
. When the Intelligent Key is placed inside or
near metallic materials.
The lockout protection may function when the
Intelligent Key is outside the vehicle but is too
close to the vehicle.
Unlocking doors
All door unlock:
1. Carry \fhe In\felligen\f \bey wi\fh you.
2. Push \fhe door handle reques\f swi\fch
*Aor back
door reques\f swi\fch*B.
3. All doors and \fhe back door will be unlocked.
4. The hazard indica\for flashes \fwice.
If a door handle is pulled while unlocking \fhe doors,
\fha\f door may no\f be unlocked. Re\furning \fhe door
handle \fo i\fs original posi\fion will unlock \fhe door. If \fhe
door does no\f unlock, af\fer re\furning \fhe door handle,
push \fhe door handle reques\f swi\fch \fo unlock \fhe
door.
Selective door unlock mode:
1. Carry \fhe In\felligen\f \bey wi\fh you.
2. Push \fhe door handle reques\f swi\fch (driver’s or fron\f passenger’s)
*Aor back door reques\f
swi\fch*B.
3. The corresponding door will be unlocked. 4. Push \fhe door handle reques\f swi\fch (driver’s or
fron\f passenger’s)
*Aor back door reques\f
swi\fch*Bagain wi\fhin 5 seconds.
5. All doors will be unlocked.
Switching door unlock mode (if equipped) :
To swi\fch \fhe door unlock mode from one \fo ano\fher,
see “Using remo\fe keyless en\fry sys\fem” (P.3-7) .
Automatic relock:
All doors will be locked au\foma\fically unless one of \fhe
following opera\fions is performed wi\fhin 30 seconds
af\fer pushing \fhe reques\f swi\fch while \fhe doors are
locked.
. Opening any doors.
. Pushing \fhe igni\fion swi\fch.
If during \fhe prese\f \fime period \fhe “UNLOC\b”
bu\f\fon on \fhe In\felligen\f \bey is pushed, all doors will be
locked au\foma\fically af\fer \fhe nex\f prese\f \fime.
BATTERY SAVER SYSTEM
When all \fhe following condi\fions are me\f for a period
of \fime, \fhe ba\f\fery saver sys\fem will cu\f off \fhe power
supply \fo preven\f ba\f\fery discharge.
. The igni\fion swi\fch is in \fhe “ACC” posi\fion, and
. All doors are closed, and
. The selec\for lever is in \fhe “P” (Park) posi\fion
(Au\foma\fic \fransmission/Con\finuously Variable
Transmission model) .
WARNING AND AUDIBLE REMINDERS
The In\felligen\f \bey sys\fem is equipped wi\fh a func\fion
\fha\f is designed \fo minimize improper opera\fions of \fhe
In\felligen\f \bey and \fo help preven\f \fhe vehicle from
being s\folen.
Type A (model wi\fh vehicle informa\fion dis-
play)
The warning buzzer sounds and \fhe warning display
appears on \fhe do\f ma\frix display (in \fhe vehicle
informa\fion display) when improper opera\fions are
de\fec\fed. See \fhe \froubleshoo\fing guide on \fhe nex\f
page. For warning and indica\fors on \fhe vehicle
informa\fion display, see “Vehicle informa\fion display”
(P.2-20) .
CAUTION:
When the buzzer sounds and the warning
display appears, be sure to check both the
vehicle and the Intelligent Key.
Type B (model wi\fhou\f do\f ma\frix display)
A chime or beep sounds inside and ou\fside \fhe vehicle
and a warning ligh\f illumina\fes or blinks.
See \fhe \froubleshoo\fing guide on \fhe nex\f page and
“Warning/indica\for ligh\fs and audible reminders” (P.2-
12) .
In\felligen\f \bey sys\fem warning ligh\f:
P posi\fion selec\fing warning ligh\f:
CAUTION:
When the chime or beep sounds or the warning
light illuminates or blinks, be sure to check both
the vehicle and the Intelligent Key.
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
Driving your vehicle to fit the circumstances is essential
for your safety and comfort\f As a driver, you should be
the one \bho kno\bs best ho\b to drive in the given
circumstances\f
ENGINE COLD START PERIOD
Due to the higher engine speeds, \bhen the engine is
cold, extra caution must be exercised \bhen selecting a
gear during the engine \barm-up period after starting
the engine\f
LOADING LUGGAGE
Loads and their distribution and the attachment of
equipment (coupling devices, roof baggage carriers,
etc\f) \bill considerably change the driving character-
istics of the vehicle\f Your driving style and speed must
be adjusted according to the circumstances\f
DRIVING IN WET CONDITIONS
.Avoid accelerating or stopping suddenly\f
. Avoid sharp turning or lane changing suddenly\f
. Avoid follo\bing too close to the vehicle in front\f
When \bater covers the road surface \bith \bater
puddles, small \bater streams, etc\f, reduce speed to
prevent hydroplaning \bhich can cause skidding and
loss of control\f Worn tires \bill increase this risk\f
DRIVING IN WINTER CONDITIONS
. Drive cautiously\f
. Avoid accelerating or stopping suddenly\f
. Avoid sharp turning or lane changing suddenly\f
. Avoid sudden steering\f
. Avoid follo\bing too close to the vehicle in front\f
WARNING:
Never remove the key or turn the ignition switch
to the “LOCK” position while driving. The steer-
ing wheel will lock. This may cause the driver to
lose control of the vehicle and could result in
serious vehicle damage or personal injury.
AUTOMATIC TRANSMISSION (AT)/CON-
TINUOUSLY VARIABLE TRANSMISSION
(CVT)
SSD0392
The ignition lock is designed so that the ignition s\bitch
cannot be turned to the “LOCK” position until the
selector lever is moved to the “P” (Park) position\f
When moving the ignition s\bitch to the “LOCK”
position, to remove the key from the ignition s\bitch,
make sure the selector lever is in the “P” (Park)
position\f
When the ignition s\bitch cannot be turned to the
“LOCK” position:
1\f Move the selector lever to the “P” (Park) position\f
2\f Turn the ignition s\bitch slightly in the “ON” direction\f 3\f Turn the ignition s\bitch to the “LOCK” position\f
4\f Remove the key, if it is inserted in the ignition
s\bitch\f
If the ignition s\bitch is turned to the “LOCK” position,
the selector lever cannot be moved from the “P” (Park)
position\f The selector lever can be moved if the ignition
s\bitch is in the “ON” position \bith the foot brake pedal
depressed\f
The “OFF” position
*1is bet\been the “LOCK” and
“ACC” positions, although it is not marked on the
ignition s\bitch\f
MANUAL TRANSMISSION (MT)
SSD0392Type A
Starting and driving5-5
CARE WHEN DRIVING
IGNITION SWITCH (model without
intelligent Key system)
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
5-24Starting and driving
WARNING:
.The VDC system is designed to help improve
driving stability but does not prevent acci-
dents due to abrupt steering operation at
high speeds or due to careless or dangerous
driving techniques. Reduce vehicle speed
and be especially careful when driving and
cornering on slippery surfaces and always
drive carefully.
. Do not modify the vehicle’s suspension. If
suspension parts such as shock absorbers,
struts, springs, stabilizer bars, bushings and
wheels are not RENAULT-approved or are
extremely deteriorated, the VDC system may
not operate properly. This could adversely
affect vehicle handling performance, and the
“VDC OFF” indicator or “SLIP”indicator or
both indicator lights may illuminate.
. If brake related parts such as brake pads,
rotors and calipers are not standard equip-
ment or are extremely deteriorated, the
“VDC OFF” indicator or “SLIP”indicator or
both indicator lights may illuminate.
. If engine related parts such as a muffler are
not standard equipment or are extremely
deteriorated, the “VDC OFF” indicator or
“ SLIP ”indicator or both indicator lights
may illuminate.
. When driving on extremely inclined surfaces
such as higher banked corners, the VDC
system may not operate properly and the
“VDC OFF” indicator or “SLIP”indicator or
both indicator lights may illuminate. Do not
drive on these types of roads. .
When driving on unstable surfaces such as a
turntable, ferry, elevator or ramp, the “VDC
OFF” indicator or “SLIP”indicator or both
indicator lights may illuminate. This is not a
malfunction. Restart the engine after driving
onto a stable surface.
. If wheels or tires other than those recom-
mended are used, the VDC system may not
operate properly and “VDC OFF”indicator or
“SLIP” indicator or both indicator lights may
illuminate.
. The VDC system is not a substitute for winter
tires or tire chains on a snowcovered road.
When accelerating or \friving on slipper\b surfaces, the
tires ma\b spin or sli\fe. With the Vehicle D\bnamic
Control (VDC) s\bstem, sensors \fetect these move-
ments an\f control the braking an\f engine output to
help improve vehicle stabilit\b.
. When the VDC s\bstem is operating, the “SLIP”
in\ficator in the instrument panel blinks.
. If the “SLIP” in\ficator blinks, the roa\f con\fitions
are slipper\b. Be sure to a\fjust \bour spee\f an\f
\friving to these con\fitions. Be sure to \frive
carefull\b. (See “Slip in\ficator light” (P.2-17)
an\f“Vehicle D\bnamic Control (VDC) off in\ficator
light” (P.2-18) .)
. In\ficator light
If a malfunction occurs in the s\bstem, the “SLIP”
an\f “VDC OFF” in\ficator lights illuminate in the
instrument panel. As long as these in\ficators are
illuminate\f, the VDC s\bstem function is cancele\f.
The VDC s\bstem uses a Brake Limite\f Slip Differential
(BLSD) function to improve vehicle traction. The BLSD
s\bstem works when one of the \friving wheels is
spinning on a slipper\b surface. The BLSD s\bstem
brakes the spinning wheel, which \fistributes the \friving power to the other \frive wheel. If the vehicle
is operate\f with the VDC OFF switch pushe\f an\f the
VDC s\bstem turne\f off, all VDC s\bstems will be turne\f
off. The BLSD s\bstem will still operate with the VDC
s\bstem off. If the BLSD s\bstem is activate\f, the “SLIP”
in\ficator light will blink an\f \bou ma\b hear a clunk noise
an\f/or feel a pulsation in the foot brake pe\fal. This is
normal an\f is not an in\fication of a malfunction. While
the VDC s\bstem is operating, \bou ma\b feel a pulsation
in the foot brake pe\fal an\f hear a noise or feel a
vibration from un\fer the hoo\f. This is normal an\f
in\ficates that the VDC s\bstem is working properl\b.
The VDC s\bstem computer has a built-in \fiagnostic
feature that tests the s\bstem each time \bou start the
engine an\f move the vehicle at a low spee\f forwar\f or
backwar\f. When the self-test occurs, \bou ma\b hear a
“clunk” noise an\f/or feel a pulsation in the foot brake
pe\fal. This is normal an\f is not an in\fication of a
malfunction.
VEHICLE DYNAMIC CONTROL (VDC) OFF
SWITCH
SIC1881
The vehicle shoul\f be \friven with the Vehicle D\bnamic
Control (VDC) s\bstem ON for most \friving con\fitions.
When the vehicle is stuck in mu\f or snow, the VDC
VEHICLE DYNAMIC CONTROL (VDC)
SYSTEM (if equipped except for
Europe)
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
system reduces the engine output to reduce wheel
spin. The engine speed will \fe reduced even if the
accelerator is depressed to the floor. \bf maximum
engine power is needed to free a stuck vehicle, turn
the VDC system off.
To turn off the Vehicle Dynamic Control (VDC) system,
push the VDC OFF switch. The
indicator light will
illuminate on.
Push the VDC OFF switch again or restart the engine
to turn ON the system.
WARNING:
. The Electronic Stability Program (ESP) sys-
tem is designed to help improve driving
stability but does not prevent accidents due
to abrupt steering operation at high speeds
or due to careless or dangerous driving
techniques. Reduce vehicle speed and be
especially careful when driving and corner-
ing on slippery surfaces and always drive
carefully.
. If engine related parts such as a muffler are
not standard equipment or the “ESP OFF”
indicator or “SLIP”indicator or both indica-
tor lights may illuminate.
. Do not modify the vehicle’s suspension. If
suspension parts such as shock absorbers,
struts, springs, stabilizer bars and bushings
are not RENAULT approved or are extremely
deteriorated the ESP system may not oper-
ate properly. This could adversely affect
vehicle handling performance, and the
“ESP OFF” indicator or “SLIP”indicator or
both indicator lights may illuminate.
. If brake related parts such as brake pads,
rotors and calipers are not standard equip-
ment or are extremely deteriorated, the “ESP
OFF” indicator or “SLIP”indicator or both
indicator lights may illuminate.
. When driving on extremely inclined surfaces
such as higher banked corners, the ESP
system may not operate properly and the
“ESP OFF” indicator or “SLIP”indicator or
both indicator lights may illuminate. Do not
drive on these types of roads. .
When driving on unstable surfaces such as a
turntable, ferry, elevator or ramp, the “ESP
OFF” indicator or “SLIP”indicator or both
indicator lights may illuminate. This is not a
malfunction. Restart the engine after driving
onto a stable surface.
. If wheels or tires other than those recom-
mended are used, the ESP system may not
operate properly and “SLIP”indicator light
may illuminate.
. The ESP system is not a substitute for winter
tires or tire chains on a snow-covered road.
. When the ESP system is operating, the “SL\bP”
indicator
in the instrument panel \flinks.
. \bf the “SL\bP” indicator \flinks, the road conditions
are slippery. Be sure to adjust your speed and
driving to these conditions. Be sure to drive
carefully. (See “Slip indicator light” (P.2-17) and
“Electronic Sta\fility Program (ESP) off indicator
light” (P.2-16) .)
. \bndicator light
\bf a malfunction occurs in the system, the “SL\bP”
indicator lights illuminate in the instrument
panel. As long as these indicators are illuminated,
the ESP system function is canceled.
The ESP system uses a Brake Limited Slip Differential
(BLSD) function to improve vehicle traction. The BLSD
system works when one of the driving wheels is
spinning on a slippery surface. The BLSD system
\frakes the spinning wheel, which distri\futes the
driving power to the other drive wheel. \bf the vehicle
is operated with the ESP system turned off, all ESP
system functions will \fe turned off.
The BLSD system and ABS will still operate with the
ESP system off. \bf the BLSD system is activated, the
“SL\bP” indicator light will \flink and you may hear a
Starting and driving5-25
ELECTRONIC STABILITY PROGRAM
(ESP) SYSTEM (if equipped for
Europe)
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
BRAKE ASSIST (if equipped)
Whe\f the for\be applied to the brake pedal ex\beeds a
\bertai\f level, the Brake Assist is a\btivated, ge\ferati\fg
greater braki\fg for\be tha\f a \bo\fve\ftio\fal brake
booster eve\f with light pedal for\be.
WARNING:
The Brake Assist is only an aid to assist braking
operation and is not a collision warning or
avoidance device. It is the driver’s responsibility
to stay alert, drive safely and be in control of the
vehicle at all times.
WARNING:
.The Anti-lock Braking System (ABS) is a
sophisticated device, but it cannot prevent
accidents resulting from careless or danger-
ous driving techniques. It can help maintain
vehicle control during braking on slippery
surfaces. Remember that stopping distances
on slippery surfaces will be longer than on
normal surfaces even with ABS. Stopping
distances may also be longer on rough,
gravel or snow covered roads, or if you are
using tire chains. Always maintain a safe
distance from the vehicle in front of you.
Ultimately, the driver is responsible for
safety.
. Tire type and condition may also affect
braking effectiveness.
— When replacing tires, install the speci-
fied size of tires on all four wheels.
— When installing a spare tire, make sure that it is the proper size and type as
specified on the tire placard. (See “Tire
placard” (P.9-8) .)
— For detailed information, see “Tires and
wheels” (P.8-34) .
The A\fti-lo\bk Braki\fg System (ABS) \bo\ftrols the
brakes so the wheels do \fot lo\bk duri\fg hard braki\fg
or whe\f braki\fg o\f slippery surfa\bes. The system
dete\bts the rotatio\f speed at ea\bh wheel a\fd varies
the brake fluid pressure to preve\ft ea\bh wheel from
lo\bki\fg a\fd slidi\fg. By preve\fti\fg ea\bh wheel from
lo\bki\fg, the system helps the driver mai\ftai\f steeri\fg
\bo\ftrol a\fd helps to mi\fimize swervi\fg a\fd spi\f\fi\fg
o\f slippery surfa\bes.
USING SYSTEM
Depress the brake pedal a\fd hold it dow\f. Depress
the brake pedal with firm steady pressure, but do \fot
pump the brakes. The ABS will operate to preve\ft the
wheels from lo\bki\fg up. Steer the vehi\ble to avoid
obsta\bles.
WARNING:
Do not pump the brake pedal. Doing so may
result in increased stopping distances.
SELF-TEST FEATURE
The ABS i\f\bludes ele\btro\fi\b se\fsors, ele\btri\b pumps,
hydrauli\b sole\foids a\fd a \bomputer. The \bomputer has
a built-i\f diag\fosti\b feature that tests the system ea\bh
time you start the e\fgi\fe a\fd move the vehi\ble at a low
speed i\f forward or reverse. Whe\f the self-test
o\b\burs, you may hear a “\blu\fk” \foise a\fd/or feel a
pulsatio\f i\f the brake pedal. This is \formal a\fd does
\fot i\fdi\bate a malfu\f\btio\f. If the \bomputer se\fses a
malfu\f\btio\f, it swit\bhes the ABS off a\fd illumi\fates the
ABS war\fi\fg light o\f the i\fstrume\ft pa\fel. The brake
system the\f operates \formally, but without a\fti-lo\bk
assista\f\be.
If the ABS war\fi\fg light illumi\fates duri\fg the self-test
or while drivi\fg, have the vehi\ble \bhe\bked by a
RENAULT dealer.
Starting and driving5-37
ANTI-LOCK BRAKING SYSTEM
(ABS) (if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
BATTERY
If the battery is not f\flly charge\b \b\fring extremely col\b
weather con\bitions, the battery fl\fi\b may freeze an\b
\bamage the battery. To maintain maxim\fm efficiency,
the battery sho\fl\b be checke\b reg\flarly. For \betails,
see “Battery” (P.8-23) of this man\fal.
ENGINE COOLANT
If the vehicle is to be left o\ftsi\be witho\ft anti-freeze,
\brain the cooling system, incl\f\bing the engine block.
Refill before operating the vehicle. For \betails, see
“Changing engine coolant” (P.8-9) of this man\fal.
TIRE EQUIPMENT
1. If yo\f have snow tires installe\b on the front/rearwheels of yo\fr vehicle, they sho\fl\b be of the same
size, loa\bing range, constr\fction an\b type (bias,
bias-belte\b or ra\bial) as the rear/front tires.
2. If the vehicle is to be operate\b in severe winter con\bitions, snow tires sho\fl\b be installe\b on all
fo\fr wheels.
3. For a\b\bitional traction on icy roa\bs, st\f\b\be\b tires may be \fse\b. However, some co\fntries, provinces
an\b states prohibit their \fse. Check local, state
an\b provincial laws before installing st\f\b\be\b tires.
Skid and traction capabilities of studded
snow tires, on wet or dry surfaces, may be
poorer than that of non-studded snow tires.
4. Snow chains may be \fse\b if \besire\b. Make s\fre they are the proper size for the tires on yo\fr
vehicle an\b are installe\b accor\bing to the chain
man\ffact\frer’s instr\fctions. (See “Tire chains”
(P.8-34) .)
SPECIAL WINTER EQUIPMENT
It is recommen\be\b that the following items be carrie\b
in the vehicle \b\fring the winter:
.A scraper an\b stiff-bristle\b br\fsh to remove ice
an\b snow from the win\bows.
. A st\fr\by, flat boar\b to be place\b \fn\ber the jack to
give it firm s\fpport.
. A shovel to \big the vehicle o\ft of snow\brifts.
PARKING BRAKE
When parking in the area where the o\ftsi\be tempera-
t\fre is below 08C (328F) , \bo not apply the parking
brake to prevent it from freezing. For safe parking:
.Place the selector lever in the “P” (Park) position
(A\ftomatic Transmission (AT)/Contin\fo\fsly Vari-
able Transmission (CVT) mo\bel) .
. Place the shift lever in the “1” (1st) or “R”
(Reverse) position (Man\fal Transmission (MT)
mo\bel) .
. Sec\frely block the wheels.
CORROSION PROTECTION
Chemicals \fse\b for roa\b s\frface \beicing are extremely
corrosive an\b will accelerate corrosion an\b the
\beterioration of \fn\berbo\by components s\fch as the
exha\fst system, f\fel an\b brake lines, brake cables,
floor pan an\b fen\bers.
In the winter, the underbody must be cleaned
periodically. For additional information, see
“Corrosion protection” (P.7-5) of this manual.
For a\b\bitional protection against r\fst an\b corrosion,
which may be req\fire\b in some areas, cons\flt a
RENAULT \bealer.
Starting and driving5-39
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
WARNING:
Be sure to block the appropriate wheel to
prevent the vehicle from moving, which may
cause personal injury.
Place suitable blocks
*1at both the front and back of
the wheel diagonall\f opposite the flat tireto
prevent the vehicle from moving when it is \backed up.
Removing wheel cover
SCE0630Type A
SCE0637Type B
Type A:
WARNING:
Never use your hands to remove the wheel
cover. This may cause personal injury.
To remove the wheel cover, use the \back rod
*1as
illustrated.
Appl\f cloth
*2between the wheel and \back rod to
prevent damaging the wheel and wheel cover.
Type B:
Remove the center wheel cap as illustrated.
Removing tire
SCE0903Jack-up points
SCE0914Floor jack-up pointFor the rear, never \back up the vehicle at a location
other than the floor \back-up point that is specified.
WARNING:
. Be sure to read and follow the instructions in
this section.
. DO NOT GET UNDER A VEHICLE THAT IS
SUPPORTED BY A JACK.
. Never use a jack which was not provided
with your vehicle.
. The jack, which is provided with your vehicle,
is designed only to lift your vehicle during a
tire change. Do not use the jack provided
with your vehicle on other vehicles.
. Never jack up the vehicle at a location other
than the jack-up point that is specified.
. Never lift the vehicle more than necessary.
. Never use blocks on or under the jack.
. Never start or run the engine while the
vehicle is on the jack. The vehicle may move
suddenly, and this may cause an accident.
In case of emergency6-3
&RQGLWLRQ