gearbox RENAULT SCENIC 2006 J84 / 2.G Electrical Equipment - Multiplexing Workshop Manual

MULTIPLEXING
Fault finding - Configuration
88B
88B-4
Fault finding - Configuration
MULTIPLEX NETWORK CONFIGURATION
In this vehicle, the two computers holding the multiplex network configuration are the airbag and UCH computers.
The Configuration screen consists of two tabs for displaying and modifying the:
–multiplex network configuration on the first tab,
–diagnosable computer configuration on the second.
LIST OF VEHICLE COMPUTERSWARNING
First repair the computers containing the multiplex network configuration (airbag and UCH) to be able to
display the screen with the multiplex network configuration diagram for the diagnosed vehicle.
ComputerMultiplex network
configurationDiagnosable
computer configuration
Via CANVia the ISO K/L
lines
InjectionPRESENT YES -
ABSPRESENT YES -
Protection and Switching UnitPRESENT YES -
Automatic gearboxPRESENT - YES
LPGPRESENT - YES
Steering lockPRESENT - -
Electric power-assisted steeringPRESENT YES -
Instrument panelPRESENT YES -
UCHPRESENT YES -
Air conditioningPRESENT YES -
Central Communications UnitPRESENT NO NO
Driving school unitPRESENT NO NO
AirbagPRESENT YES -
Automatic parking brakePRESENT - YES
Parking assistanceABSENT NO NO
Discharge bulbsABSENT - YES

MULTIPLEXING
Fault finding - Configuration
88B
88B-6
NETWORK CONFIGURATION
NOTESThe configuration is detected with the ignition on.
It can be launched from the multiplex network test results screens.
The tool displays the UCH and/or airbag computer configuration.
Configuration involves the following steps:
–Select the computer to be modified.
–Select the multiplex network diagram version.
The version number increases with each change to the multiplex network wiring in this vehicle.
This information is available in the global vehicle base.
Choice of computers in the vehicle present on the network
The following computers are always fitted to the vehicle:
–Injection
–Protection and Switching Unit
–ABS
–Steering lock (cannot be support fault finding with the tool)
–Instrument panel
–Passenger Compartment Control Unit (UCH)
–Electric power-assisted steering
–Airbag
+ the vehicle options:
–Automatic gearbox
–LPG
–Climate control
–Control and Communications Unit (cannot support fault finding with the tool)
–Automatic parking brake
–Driving School Unit (cannot support fault finding with the tool)
–Discharge bulbs
–Parking assistance
WARNING
A computer connected to the multiplex network but not registered in the computers containing the multiplex
network configuration will not be checked in the multiplex network test.
Adjust the configuration by declaring any missing computers as present in the UCH or airbag computer or both.
Relaunch the multiplex network test after modifying the configuration.