wheel size RENAULT SCENIC 2006 J84 / 2.G Power Assisted Steering Workshop Manual

POWER ASSISTED STEERING
Fault finding - Fault Finding Chart
36B
36B - 48V6 MR-366-X84-36B000$924_eng.mif
PAS
Vdiag No.: 04, 06, 08, 0C
and 12
ALP3 Poor vehicle handling
NOTESNone
Check using status ET026 Computer calibration that the computer configuration corresponds to the vehicle
equipment, wheel size, vehicle type and engine:
Configure the computer correctly using the diagnostic tool, if necessary (see SC001 Computer calibration).
Check the conformity of PR014 Assistance level available.
Check the condition and pressure of the tyres, the condition of the joints and the front axle geometry.
Check the vehicle battery voltage and the condition of the battery terminals.
Repair if necessary.
Check the condition and presence of the electric power steering supply fuse.
Repair if necessary.
Check the condition of the electric power steering black 2-track power connector.
If there is a repair procedure (see Technical Note 6015A, Repairing electrical wiring, Wiring: Precautions for
repair), repair the connector, otherwise change the wiring.
If the fault is still present, contact the Techline.
AFTER REPAIRCarry out a road test followed by a check with the diagnostic tool.
DAETRW_V04_ALP03/DAETRW_V08_ALP03/DAETRW_V06_ALP03/DAETRW_V0C_ALP03/
DAETRW_V12_ALP03