key RENAULT SCENIC 2006 J84 / 2.G Tyre Pressure Monitoring Workshop Manual

TYRE PRESSURE MONITOR
Fault finding - Configurations and programming
35B
UCH
Program no.: 350 and higher
Vdiag No: 48-4C-4D-4F-50
SC001:
READING VALVE SETS AND STORED CODES
–Select the Repair mode menu
–Select the Programming menu
–Select line SC001 Read valve set and stored codes in the Tyres function.
VP005
ENTERING RECOMMENDED PRESSURES
To enter the recommended pressures correctly, use the values specified by the manufacturer and found in the
Workshop Repair Manual or driver's handbook for the vehicle with the tyres installed on the vehicle, or
indicated on the label on the driver's door.
–Select the repair mode menu.
–Select the other parameters menu.
–Select line VP005 Enter recommended pressures.
–Program the vehicle type: MPV or other.
–Enter the recommended pressures at the keyboard.
–Confirm the pressures.
–Click on "Finish" to end the procedure.
Check the recommended pressures in memory:
–Select the Statuses/Parameters menu.
–Select the Tyre management menu.
–Read parameters PR009 to PR012.
–If there is a fault, repeat the operation from the beginning.
IMPORTANT
If the recommended pressure format is not correct or if the pressure entered is outside the permitted tolerance
values in relation to the type of vehicle selected, the following error message will be displayed: "Procedure failed:
incorrect pressure format or value outside authorised range".
Edition 435B-15