trip computer RENAULT SCENIC 2011 J95 / 3.G Air Bag RC5 - Seat Belt Pretensioners Workshop Manual

88C-55
MR-372-J84-88C100$472.mif
V5
AIRBAG RC5
Vdiag: 14AIRBAGS AND PRETENSIONERS
Fault finding – Interpretation of faults88C
DF077
CONTINUED 1
NO
Check the seat connector connections (tracks A5 and A6).
Strip the driver's seat and check that the chest side airbag ignition module is connected
correctly.
Disconnect the chest side airbag ignition module, connect a dummy ignition module to
the ignition module connector and check the resistance again on cable B
of the adapter.
– If the value obtained is correct, replace the driver's front chest side airbag module.
– If the value obtained is incorrect, replace the wiring between points C1 and C3
(seat wiring).
YESCheck the seat connector connections (tracks A5 and A6) again, as well as the
connections of the 64-track connector (tracks 15 and 16).
If the fault is still present, the wiring is faulty between the computer and the driver's seat
(C0/C1).
Replace the wiring if necessary.
AFTER REPAIRReconnect the computer and driver's frontal airbag ignition modules, then switch on
the ignition again.
Clear the computer fault memory. Switch off the ignition.
Carry out the check again using the diagnostic tool and, if there is no fault, unlock
the computer.
When replacing the airbag module, do not forget to reconnect the earth on the new
module.
Destroy the driver's front airbag if it has been replaced (tool Elé. 1287).