boot RENAULT TWINGO 2009 2.G Chasiss Workshop Manual

33A-18
REAR AXLE COMPONENTS
Rear brake cylinder: Removal - Refitting
33A
REFITTING
I - REFITTING PREPARATIONS OPERATION
aRemove any dust from the drums and the flanges
using the cleaning station.
aCheck the condition of the brake cylinder boots and
pistons (replace any faulty parts).
II - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the rear brake cylinder,
-the rear brake cylinder bolt on the flange,
-the rigid brake pipe union on the rear brake cylin-
der,
-the upper return spring using brake shoe pliers.
aTorque tighten:
-the rear brake cylinder bolt on the flange (14.5
Nm),
-the rigid brake pipe union on the rear brake cyl-
inder (15 Nm).
III - FINAL OPERATION.
aRefit:
-the rear brake drum (see 33A, Rear axle compo-
nents, Rear brake drum: Removal - Refitting,
page 33A-19) ,-the rear wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
aBleed the brake circuit (see 30A, General informa-
tion, Braking circuit: Bleed, page 30A-4) .
aAdjust the brake pads by depressing the brake pedal
repeatedly.
117348