fuse chart RENAULT TWINGO 2009 2.G Electrical Equipment - Fuse Box Workshop Manual

Electrical equipment
"The repair procedures given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The procedures may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from
which his vehicles are constructed."
V1
All rights reserved by Renault s.a.s.
Edition Anglaise
Copying or translating, in part or in full, of this document or use of the service part
reference numbering system is forbidden without the prior written authority of
Renault s.a.s.
© Renault s.a.s.
V1 MR-413-X44-81C000$000_engTOC.mif
FUSE BOX
Customer complaints 81C - 2
Fault finding chart 81C - 5
81C
MR-413-X44-81C000$000_engTOC.mif

81C-5
MR-413-X44-81C000$400_eng.mif
V1
81C
FUSE BOX
Fault finding chart
ALP 1 No + after ignition feed on component 1016
NOTESCheck fuses F1-30A, F2-15A, F3-15A, F3-15A, F4-7.5A, F5-15A, F6-15A,
F7-15A, F8-15A, F9-15A, F10-5A of component 1016 in addition to fuse MF-60A of
component 597.
During the test the vehicle should be on + after ignition feed.
Use a test light to check for + 12 V between fuse F1-30A of component 1016 and a chassis earth.
Is the test light lit?
NO YES
Test the continuity on connection A between
fuse F1-30A of component 1016 and component 104.Check fuse F1-30A.
Is the continuity correct? Is the fuse correct?
YES NO YES NO
Carry out a continuity test
between connection BP12
and connection A of
component 104.
Is the continuity correct?
YES NO
Use a test light to check for + 12 V between
connection BP12 of component 104 and a chassis
earth.
Is the test light lit?
YES NO
Replace the immobiliser
Fault on connection A.
Repair the wiring. If there
is a repair procedure
(see Technical Note
6015A, Repairing
electrical wiring,
Wiring: Precautions for
repair), repair the wiring,
otherwise replace it.Replace the passenger
compartment fuse box.Replace fuse F1-30A
of component 1016.
Replace the immobiliser.
MR-413-X44-81C000$400_eng.mif

81C-6
MR-413-X44-81C000$400_eng.mif
V1
FUSE BOX
Fault finding chart81C
ALP 1
CONTINUED
NO
Test the continuity on connection BP12 between
component 104 and fuse MF-60A of component 597.
Is the continuity correct?
YES NO
Use a test light to check for + 12 V between
connection BPDA of component 597 and a chassis
earth.
Is the test light lit?
YES NO
Check fuse MF-60A of component 597. Carry out a continuity test on connection BPDA
between components 597 and 1033.
Is the fuse correct? Is the continuity correct?
YES NO YES NO
Replace the engine fuse
and relay box.Replace the fuse. Replace the battery Fault on connection A.
Repair the wiring. If there
is a repair procedure (see
Technical Note 6015A,
Repairing electrical
wiring, Wiring:
Precautions for repair),
repair the wiring,
otherwise replace it.
Fault on connection A. Repair the wiring. If there is a
repair procedure (see Technical Note 6015A,
Repairing electrical wiring, Wiring: Precautions
for repair), repair the wiring, otherwise replace it.

81C-7
MR-413-X44-81C000$400_eng.mif
V1
FUSE BOX
Fault finding chart81C
ALP 2 No component 1016 fuse F11-20A supply
NOTESCheck fuse F11-20A of component 1016 in addition to fuse MF-60A of
component 597.
Use a test light to check for + 12 V between fuse F11-20A of component 1016 and a chassis earth.
Is the test light lit?
YES NO
Check fuse F11-20A of component 1016.Carry out a continuity test on connection BPS1
between fuse F11-20A of component 1016 and
fuse MF-60A of component 1033.
Is the fuse correct? Is the continuity correct?
YES NO NO YES
Use a test light to check for
+ 12 V between
connection BPS1 of
component 1033 and a
chassis earth.
Is the test light lit?
YES NO
End of procedure. Replace the battery
Replace the passenger
compartment fuse box.Replace the fuse.Fault on connection BPS1.
Repair the wiring. If there is
a repair procedure (see
Technical Note 6015A,
Repairing electrical
wiring, Wiring:
Precautions for repair),
repair the wiring, otherwise
replace it.

81C-8
MR-413-X44-81C000$400_eng.mif
V1
FUSE BOX
Fault finding chart81C
ALP 3 No component 1016 fuse F12-5A supply
NOTESCheck fuse F12-5A of component 1016 in addition to fuse MF-60A of component 597.
Use a test light to check for + 12 V between fuse F12-5A of component 1016 and a chassis earth.
Is the test light lit?
YES NO
Check fuse F12-5A of component 1016.Carry out a continuity test on connection BPS1
between fuse F12-5A of component 1016 and
fuse MF-60A of component 1033.
Is the fuse correct? Is the continuity correct?
YES NO NO YES
Use a test light to check for
+ 12 V between
connection BPS1 of
component 1033 and a
chassis earth.
Is the test light lit?
YES NO
End of procedure. Replace the battery.
Replace the passenger
compartment fuse box.Replace the fuse.Fault on connection BPS1.
Repair the wiring. If there is
a repair procedure (see
Technical Note 6015A,
Repairing electrical
wiring, Wiring:
Precautions for repair),
repair the wiring, otherwise
replace it.

81C-9
MR-413-X44-81C000$400_eng.mif
V1
FUSE BOX
Fault finding chart81C
ALP 4 No component 1016 fuse F13-30A supply
NOTESCheck fuse F13-30A of component 1016 in addition to fuse MF-60A of
component 597.
Use a test light to check for + 12 V between fuse F13-30A of component 1016 and a chassis earth.
Is the test light lit?
YES NO
Check fuse F13-30A of component 1016.Carry out a continuity test on connection BPS1
between fuse F13-30A of component 1016 and
fuse MF-60A of component 1033.
Is the fuse correct? Is the continuity correct?
YES NO NO YES
Use a test light to check for
+ 12 V between
connection BPS1 of
component 1033 and a
chassis earth.
Is the test light lit?
YES NO
End of procedure. Replace the battery.
Replace the passenger
compartment fuse box.Replace the fuse. Fault on
connection BPS1.Repair
the wiring. If there is a
repair procedure (see
Technical Note 6015A,
Repairing electrical
wiring, Wiring:
Precautions for repair),
repair the wiring, otherwise
replace it.

81C-10
MR-413-X44-81C000$400_eng.mif
V1
FUSE BOX
Fault finding chart81C
ALP 5 No component 1016 fuse F14-20A supply
NOTESCheck fuse F14-20A of component 1016 in addition to fuse MF-60A of
component 597.
Use a test light to check for + 12 V between fuse F14-20A of component 1016 and a chassis earth.
Is the test light lit?
YES NO
Check fuse F14-20A of component 1016.Carry out a continuity test on connection BPS1
between fuse F14-20A of component 1016 and
fuse MF-60A of component 1033.
Is the fuse correct? Is the continuity correct?
YES NO NO YES
Use a test light to check for
+ 12 V between
connection BPS1 of
component 1033 and a
chassis earth.
Is the test light lit?
YES NO
End of procedure. Replace the battery.
Replace the passenger
compartment fuse box.Replace the fuse.Fault on connection BPS1.
Repair the wiring. If there is
a repair procedure (see
Technical Note 6015A,
Repairing electrical
wiring, Wiring:
Precautions for repair),
repair the wiring, otherwise
replace it.

81C-11
MR-413-X44-81C000$400_eng.mif
V1
FUSE BOX
Fault finding chart81C
ALP 6 No component 1016 fuse F16-20A supply
NOTESCheck fuse F16-20A of component 1016 in addition to fuse MF-60A of
component 597.
Use a test light to check for + 12 V between fuse F16-20A of component 1016 and a chassis earth.
Is the test light lit?
YES NO
Check fuse F16-20A of component 1016.Carry out a continuity test on connection BPS1
between fuse F16-20A of component 1016 and
fuse MF-60A of component 1033.
Is the fuse correct? Is the continuity correct?
YES NO NO YES
Use a test light to check for
+ 12 V between
connection BPS1 of
component 1033 and a
chassis earth.
Is the test light lit?
YES NO
End of procedure. Replace the battery.
Replace the passenger
compartment fuse box.Replace the fuse.Fault on connection BPS1.
Repair the wiring. If there is
a repair procedure (see
Technical Note 6015A,
Repairing electrical
wiring, Wiring:
Precautions for repair),
repair the wiring, otherwise
replace it.

81C-12
MR-413-X44-81C000$400_eng.mif
V1
FUSE BOX
Fault finding chart81C
ALP 7 No component 1016 fuse F25-5A supply
NOTESCheck fuse F25-5A of component 1016 in addition to fuse MF-60A of component 597.
Use a test light to check for + 12 V between fuse F25-5A of component 1016 and a chassis earth.
Is the test light lit?
YES NO
Check fuse F25-5A of component 1016.Carry out a continuity test on connection BPS1
between fuse F25-5A of component 1016 and
fuse MF-60A of component 1033.
Is the fuse correct? Is the continuity correct?
YES NO NO YES
Use a test light to check for
+ 12 V between
connection BPS1 of
component 1033 and a
chassis earth.
Is the test light lit?
YES NO
End of procedure. Replace the battery.
Replace the passenger
compartment fuse box.Replace the fuse.Fault on connection BPS1.
Repair the wiring. If there is
a repair procedure (see
Technical Note 6015A,
Repairing electrical
wiring, Wiring:
Precautions for repair),
repair the wiring, otherwise
replace it.

81C-13
MR-413-X44-81C000$400_eng.mif
V1
FUSE BOX
Fault finding chart81C
ALP 8 No component 1016 fuse F40-5A supply
NOTESCheck fuse F40-5A of component 1016 in addition to fuse MF-60A of component 597.
Use a test light to check for + 12 V between fuse F40-5A of component 1016 and a chassis earth.
Is the test light lit?
YES NO
Check fuse F40-5A of component 1016.Carry out a continuity test on connection BPS1
between fuse F40-5A of component 1016 and
fuse MF-60A of component 1033.
Is the fuse correct? Is the continuity correct?
YES NO NO YES
Use a test light to check for
+ 12 V between
connection BPS1 of
component 1033 and a
chassis earth.
Is the test light lit?
YES NO
End of procedure. Replace the battery.
Replace the passenger
compartment fuse box.Replace the fuse.Fault on connection BPS1.
Repair the wiring. If there is
a repair procedure (see
Technical Note 6015A,
Repairing electrical
wiring, Wiring:
Precautions for repair),
repair the wiring, otherwise
replace it.