window RENAULT TWINGO 2009 2.G Electrical Equipment Workshop Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2009, Model line: TWINGO, Model: RENAULT TWINGO 2009 2.GPages: 241
Page 2 of 241
© Renault s.a.s 2007 "The repair procedures given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The procedures may be modified as a result of changes introduced by the manufacturer in
the production of the various component units and accessories from which the vehicles are
constructed".All rights reserved by Renault.
Copying or translating, in part or in full, of this document or use of the service part reference
numbering system is forbidden without the prior written authority of Renault.
JUNE 2009 EDITION ANGLAISE
X44
86ARADIO
86BCAR PHONE
87BPASSENGER COMPARTMENT CONNECTION
UNIT
87COPENING ELEMENT MANAGEMENT
87DELECTRIC WINDOWS - SUNROOF
87FPARKING DISTANCE CONTROL
88AWIRING HARNESS
88CAIR BAG AND PRETENSIONERS
88DDRIVER'S POSITION
Page 5 of 241
Contents
Screen washer pump:
Removal - Refitting 85A-23
Front screen washer jet:
Removal - Refitting 85A-24
Rear screen washer jet:
Removal - Refitting 85A-25
Windscreen washer
reservoir: Removal - Refitting 85A-26
86A RADIO
Radio: List and location of
components 86A-1
Radio: Removal - Refitting 86A-4
Radio aer ial: Removal -
Refitting 86A-5
Tweeter: Removal - Refitting 86A-7
Front speakers: Removal -
Refitting 86A-8
Rear speakers: Removal -
Refitting 86A-9
Display: Removal - Refitting 86A-10
Radio control satellite:
Removal - Refitting 86A-11
Offset multimedia socket:
Removal - Refitting 86A-13
86B CAR PHONE
Car phone: List and location
of components 86B-1
"Hands-free" microphone:
Removal - Refitting 86B-2
Computer: Removal -
Refitting 86B-4 85A WIPING - WASHING
87BPASSENGER COMPARTMENT
CONNECTION UNIT
UCH: Removal - Refitting 87B-1
87C OPENING ELEMENT MANAGEMENT
Opening elements
management: List and
location of components 87C-1
Tailgate opening switch:
Removal - Refitting 87C-3
87D ELECTRIC WINDOWS - SUNROOF
Electric window: List and
location of components 87D-1
Electric sunroof: List and
location of components 87D-2
Front electric window
switches on driver's door:
Removal - Refitting 87D-4
Front electric window switch
on passenger door: Removal
- Refitting 87D-5
Sunroof switch: Removal -
Refitting 87D-6
Sunroof opening motor:
Removal - Refitting 87D-7
87F PARKING DISTANCE CONTROL
Parking distance control: List
and location of components 87F-1
Parking distance control
switch: Removal - Refitting 87F-3
Parking distance control
buzzer: Removal - Refitting 87F-4
Page 68 of 241
84A-13
CONTROL - SIGNALS
Exterior rear view mirror control switch: Removal - Refitting
DOOR MIRRORS 02 or DOOR MIRRORS 03 or DOOR MIRRORS 04
84A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove the driver's door trim ( (see Front side
door trim: Removal - Refitting) ).
aRemove the electric window control plate from the
front side door trim by pressing the clips (1) .II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the exterior rear view mirror control switch
by pressing on the clips (3) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit the exterior rear view mirror control switch on
the electric window plate.
II - FINAL OPERATION.
aRefit:
-the electric window control plate on the front side
door trim,
-the driver's door trim ( (see Front side door trim:
Removal - Refitting) ).
119497
119513
119513
Page 69 of 241
84A-14
CONTROL - SIGNALS
Heated rear screen: Repair
84A
The screen printed heated grid on the inner face of the
window may have an accidental cut, making the affec-
ted part of the circuit useless.
aDetermine the exact location of the cut using a volt-
meter.
Faults such as these can be repaired by using the
heated rear screen varnish available at the. Maga-
sin Pièces de Rechange
I - DETERMINING THE EXACT LOCATION OF THE
CUT USING A VOLTMETER
aSwitch on the ignition.
aSwitch on the heated rear screen supply.
1 - Detection between lines B and A
aConnect the + wire of the voltmeter to the + feed ter-
minal of the rear screen.
aPut the - wire of the voltmeter on a filament at the -
terminal side of the rear screen (line B); the voltage
obtained should be roughly equal to that of the bat-
tery.
aMove the - wire to line A (arrowed line): the voltage
gradually drops.
aA sudden voltage drop indicates that the filament is
cut at that point (carry out this operation for each fi-
lament).
2 - Detection between lines C and A
aConnect the - wire of the voltmeter to the - terminal
of the rear screen.
aPut the + wire of the voltmeter on the filament at the
+ terminal end of the rear screen (line C); the voltage
obtained should be roughly equal to battery voltage.
aMove the + wire towards line A (arrowed line); the
voltage gradually drops.aA sudden voltage drop indicates that the filament is
cut at that point (carry out this operation for each fi-
lament).
II - REPAIRING THE FILAMENT
aClean the section to be treated to remove all dust or
grease, preferably using alcohol or a glass cleaner,
and wipe with a clean, dry cloth.
aTo ensure that the new line is straight, before var-
nishing, apply adhesive tape to either side of the
section to be repaired, leaving the conducting line
exposed.
aBefore using the varnish, shake the bottle to prevent
the silver particles settling at the bottom.
Repair
aCarry out the repair using a small brush, applying a
sufficiently thick layer. If applying successive coats,
allow sufficient drying time between each coat and
do not repeat the operation more than three times.
aIf an error is made with the varnish (runs, smudges,
etc.), it can be removed using a knife point, but only
after several hours, once the product has properly
hardened.
8814
8815
Page 102 of 241
86A-5
RADIO
Radio aerial: Removal - Refitting
WITH 2 SPEAKERS, WITHOUT RADIO or WITH 4 SPEAKERS, WITHOUT RADIO or RADIO NO. 01 or RADIO
NO. 03
86A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the front seat belt upper bolt (see Front seat belt:
Removal - Refitting) (MR 412, 59A, Safety equip-
ment),
-the rear seat belt upper bolt (see Rear seat belt:
Removal - Refitting) (MR 412, 59A, Safety equip-
ment),
-the sun visor (see Sun visor: Removal - Refitting)
(MR 412, 57A, Interior equipment),
-the interior equipment covers (see Interior rear-
view mirror: Removal - Refitting) (MR 412, 57A,
Interior equipment),
-the A-pillar trims (see Windscreen pillar trim: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the rear parcel shelf side trims (see Rear parcel
shelf side trim: Removal - Refitting) (MR 412,
71A, Body internal trim),
-the rear panel trims (see Rear panel lining: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the rear quarter panel trims (see Quarter panel
trim: Removal - Refitting) (MR 412, 71A, Body in-
ternal trim),
-the B-pillar upper trims (see B-pillar upper trim:
Removal - Refitting) (MR 412, 71A, Body internal
trim),
-the headlining (see Headlining: Removal - Refit-
ting) (MR 412, 71A, Body internal trim).
aDisconnect the battery (see 80A, Battery, Battery:
Removal - Refitting, page 80A-2) .
aRemove the sunroof “motor - computer” assembly
(see 87D, Electric windows - Sunroof, Sunroof
opening motor: Removal - Refitting, page 87D-7)
.II - OPERATION FOR REMOVAL OF PART
CONCERNED
aDisconnect the radio aerial connector (1) .
aDisconnect the radio aerial connector (2) .
aRemove:
-the radio aerial nut (3) ,
-the radio aerial.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the radio aerial, OPENING ROOF
121086
121087
Page 103 of 241
86A-6
RADIO
Radio aerial: Removal - Refitting
WITH 2 SPEAKERS, WITHOUT RADIO or WITH 4 SPEAKERS, WITHOUT RADIO or RADIO NO. 01 or RADIO
NO. 03
86A
-the radio aerial nut.
aConnect the radio aerial connectors.
II - FINAL OPERATION.
aRefit the sunroof “motor - computer” assembly (see
87D, Electric windows - Sunroof, Sunroof ope-
ning motor: Removal - Refitting, page 87D-7) .
aRefit:
-the headlining (see Headlining: Removal - Refit-
ting) (MR 412, 71A, Body internal trim),
-the B-pillar left-hand upper trims (see B-pillar up-
per trim: Removal - Refitting) (MR 412, 71A,
Body internal trim),
-the rear quarter panel trims (see Quarter panel
trim: Removal - Refitting) (MR 412, 71A, Body in-
ternal trim),
-the rear panel trims (see Rear panel lining: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the rear parcel shelf side trims (see Rear parcel
shelf side trim: Removal - Refitting) (MR 412,
71A, Body internal trim),
-the A-pillar trims (see Windscreen pillar trim: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the interior equipment covers (see Interior rear-
view mirror: Removal - Refitting) (MR 412, 57A,
Interior equipment),
-the sun visor (see Sun visor: Removal - Refitting)
(MR 412, 57A, Interior equipment),
-the rear seat belt upper bolt (see Rear seat belt:
Removal - Refitting) (MR 412, 59A, Safety equip-
ment),
-the front seat belt upper bolt (see Front seat belt:
Removal - Refitting) (MR 412, 59A, Safety equip-
ment).aConnect the battery (see 80A, Battery, Battery: Re-
moval - Refitting, page 80A-2) .
aCarry out the necessary operations without the dia-
gnostic tool (see Battery: Initialisation) (MR 413,
80A, Battery).
OPENING ROOF
OPENING ROOF
Page 122 of 241
87D-1
ELECTRIC WINDOWS - SUNROOF
Electric window: List and location of components
ELECTRIC FRONT WINDOW or ONE-TOUCH ELECTRIC PASSENGER WINDOW CONTROL
87D
I - LIST OF COMPONENTS
II - POSITION OF THE COMPONENTS
1 - UCH2 - Driver's window lift switch board
3 - Passenger window lift switch board No. Description
(1) UCH
(2) Driver's window lift switch board
(3) Passenger window lift switch board
119507
120163
120164
Page 123 of 241
87D-2
ELECTRIC WINDOWS - SUNROOF
Electric sunroof: List and location of components
OPENING ROOF
87D
I - LIST OF COMPONENTS
II - LOCATION OF COMPONENTS
1 - UCH
The UCH is located in the dashboard, above the pas-
senger compartment relay unit; to remove it (see 87B,
Passenger compartment connection unit, UCH: Re-
moval - Refitting, page 87B-1) .2 - Passenger compartment relay unit
3 - Sunroof switch No. Description
(1) UCH
(2) Passenger compartment fuse and relay
box
(3) Sunroof switch
(4) Sunroof moving panel
(5) Sunroof motor - computer
119507
119504
121391
Page 124 of 241
87D-3
ELECTRIC WINDOWS - SUNROOF
Electric sunroof: List and location of components
OPENING ROOF
87D
4 - Sunroof moving panel
To remove it (see Sunroof mobile panel: Removal -
Refitting) (MR 412, 52A, Non-side opening elements
mechanism).
5 - Sunroof motor - computer
The “sunroof computer - motor” assembly is located
under the headlining, at the rear of the vehicle.
121153
121396
Page 125 of 241
87D-4
ELECTRIC WINDOWS - SUNROOF
Front electric window switches on driver's door: Removal - Refitting
ELECTRIC FRONT WINDOW or ONE-TOUCH ELECTRIC PASSENGER WINDOW CONTROL
87D
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove the driver's front side door trim (see Front
side door trim: Removal - Refitting) (MR 412,
72A, Side opening element trim).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the electric window switches by pressing
on the clips (1) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit the electric window switches on the driver's
electric window plate.
II - FINAL OPERATION.
aRefit the driver's front side door trim (see Front side
door trim: Removal - Refitting) (MR 412, 72A,
Side opening element trim).
119513