spark plugs RENAULT TWINGO 2009 2.G Engine And Peripherals User Guide

17A-17
IGNITION
Plugs: Removal - Refitting
D4F, and 772
17A
Spark plug electrode gap
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove the air filter unit (see 12A, Fuel mixture,
Air filter unit: Removal - Refitting, page 12A-13) .a
Disconnect the spark plug wiring.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the spark plugs using the (Ele. 1933) (1)
equipped with the (Ele. 1382-01) (2) . Special tooling required
Ele. 193323 N.m tightening wrench for
spar k plugs
Ele. 1382-0114 mm Plug spanner.
Equipment required
set of feeler gauges
Tightening torquesm
spar k plugs23 N.m
Type of spark plug Gap (mm)
CHAMPION 0.90 ± 0.05
NGK 0.85 ± 0.05
132677
WARNING
To disconnect the spark plug leads, pull on the
extensions and not on the leads.
132700

17A-18
IGNITION
Plugs: Removal - Refitting
D4F, and 772
17A
REFITTING
I - REMOVAL PREPARATION OPERATION
aCheck and, if necessary, correct the spark plug elec-
trode gaps using a set of feeler gauges.
II - REFITTING OPERATION FOR PART
CONCERNED
aRefit the spark plugs.
aTorque tighten the spark plugs (23 N.m) using the
(Ele. 1933) fitted with the (Ele. 1382-01).
132700

17A-19
IGNITION
Plugs: Removal - Refitting
D4F, and 772
17A
III - FINAL OPERATION
aApply a bead of FLUORSTAR 2L grease (see Vehi-
cle: Parts and consumables for the repair) (04B,
Consumables - Products) 2 mm in diameter on the
internal perimeter of the high-tension caps at the
spark plug end.
aConnect the spark plug wiring.
aRefit the air filter unit (see 12A, Fuel mixture, Air fil-
ter unit: Removal - Refitting, page 12A-13) .
106640