oil RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual TWINGO 2009 2.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1710/w960_1710-0.png RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual

Page 3 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual TWINGO - Chapitre 1
Contents
Pages
TWINGO - Chapitre 1ContentsPages
10AENGINE AND CYLINDER BLOCK 
ASSEMBLY
Crankshaft seal on timing 
end: Removal - Refitting 10A-1
Crankshaft seal, gearbox 
end: Rem

Page 4 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual Contents
Air resonator : Removal - 
Refitting 12A-19
Throttle valve: Removal - 
Refitting 12A-20
Throttle valve: Cleaning 12A-26
Air flowmeter: Removal - 
Refitting 12A-28
Inlet distributor: Remov

Page 5 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual Contents
13C PREHEATING
Pre-postheating unit: 
Removal - Refitting 13C-1
Heater plugs: Removal - 
Refitting 13C-2
14A ANTIPOLLUTION
Oil vapour rebreathing 
circuit: Descriptions 14A-1
Fuel vapour re

Page 9 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-3
ENGINE AND CYLINDER BLOCK ASSEMBLY
Crankshaft seal, gearbox end: Removal - Refitting
K4M
10A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towi

Page 11 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-5
ENGINE AND CYLINDER BLOCK ASSEMBLY
Crankshaft seal, gearbox end: Removal - Refitting
K4M
10A
-the lower engine tie-bar (see 19D, Engine mount-
ing, Lower engine tie-bar: Removal - Refitting,
pag

Page 13 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-7
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
10A
aSet the wheels straight ahead.
aPosition the flywheel immobiliser.
aRemove the cover from the universal joint (do not

Page 16 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-10
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
10A
aRemove the subframe bolts (13) one by one, replac-
ing them in turn with the threaded rods of the tool
(Tav. 1233-01

Page 17 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-11
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
10A
aApply:
-four beads (17) of SILICONE ADHESIVE SEAL-
ANT  (see Vehicle: Parts and consumables for
the repair) (04B, Co

Page 18 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-12
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
10A
-the subframe rear bolts (105 Nm),
-the subframe rear tie rod inner bolts (21 N.m),
-the subframe rear tie rod outer

Page 19 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-13
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
D4F or D7F
10A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and li
Page:   1-10 11-20 21-30 31-40 41-50 ... 210 next >