bonnet RENAULT TWINGO 2009 2.G Trim And Upholstery Workshop Manual

71A-7
BODY INTERNAL TRIM
Front door sill lining: Removal - Refitting
71A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aUnclip the bonnet release catch.
aPartially remove the front side door seal.
aRemove:
-the front seat belt lower mounting (see Front seat
belt: Removal - Refitting) (MR 412, 59A, Safety
equipment),
-the rear parcel shelf side trim (see 71A, Body in-
ternal trim, Rear parcel shelf side trim: Removal
- Refitting, page 71A-15) ,
-the rear panel trim (see 71A, Body internal trim,
Rear panel lining: Removal - Refitting, page
71A-14) .II - OPERATION FOR REMOVAL OF PART
CONCERNED
aUnclip the front door sill lining.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aClip on the front door sill lining.
II - FINAL OPERATION.
aRefit:
-the rear panel trim (see 71A, Body internal trim,
Rear panel lining: Removal - Refitting, page
71A-14) ,
-the rear parcel shelf side trim (see 71A, Body in-
ternal trim, Rear parcel shelf side trim: Removal
- Refitting, page 71A-15) ,
-the front seat belt lower mounting (see Front seat
belt: Removal - Refitting) (MR 412, 59A, Safety
equipment),
-the front side door seal.
aFit the bonnet release catch.
121144
121143
Note:
The front seat does not need to be removed to
remove the front door sill lining.