check engine RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual TWINGO RS 2009 2.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1719/w960_1719-0.png RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual

Page 91 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 31A-48
FRONT AXLE COMPONENTS
Front axle subframe: Removal - Refitting
31A
II -  REFITTING OPERATION FOR PART 
CONCERNED
aRefit the speed selection cable guide on the sub-
frame.
aRefit:
-the front dri

Page 150 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 35A-10
WHEELS AND TYRES
Tyre pressure: Identification
35A
INFLATION
The pressure values given are « motorway »  pres-
sures.WARNING
If checking the pressure when hot, increase the tyre
inflation pr

Page 166 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 36A-15
STEERING ASSEMBLY
Steering column: Removal - Refitting
RIGHT-HAND DRIVE
36A
-the steering wheel lower cover,
-the steering wheel lower cover bolts,
-the dashboard lower cover.
aRefit the rev co

Page 196 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-17
MECHANICAL COMPONENT CONTROLS
Brake servo: Removal - Refitting
JB1 or JH1 or JH3 or JR5, and LEFT-HAND DRIVE
37A
aCheck that the brake servo seal (5) is in place and
replace the seal if it is f

Page 201 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-22
MECHANICAL COMPONENT CONTROLS
Brake servo: Removal - Refitting
RIGHT-HAND DRIVE
37A
aFully lower the engine using the (Mot. 1672).
aPivot the brake servo so that the servo pushrod (15)
is orien

Page 259 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-80
MECHANICAL COMPONENT CONTROLS
Brake servo: Check
RIGHT-HAND DRIVE
37A
aConnect a vacuum pump to the end of the non-re-
turn valve.
aActivate the vacuum pump to obtain a vacuum of
500 mbar.
aChe