spare wheel RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual TWINGO RS 2009 2.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1719/w960_1719-0.png RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual

Page 51 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 31A-8
FRONT AXLE COMPONENTS
Front brake calliper: Removal - Refitting
EQ UIPMENT LEVEL EA0 or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA5
or EQUIPMENT LEVEL EAG or EQUIPMENT LEVE

Page 150 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 35A-10
WHEELS AND TYRES
Tyre pressure: Identification
35A
INFLATION
The pressure values given are « motorway »  pres-
sures.WARNING
If checking the pressure when hot, increase the tyre
inflation pr

Page 235 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-56
MECHANICAL COMPONENT CONTROLS
Clutch circuit: Bleed
JH3 or JR5
37A
Bleed screw with two clips.
aTo open the bleed screw, lower the clip (6) and lift
the clip (7) while pulling by one notch.
III

Page 236 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-57
MECHANICAL COMPONENT CONTROLS
Clutch circuit: Bleed
JH3 or JR5
37A
2 -  Bleed using a new syringe.
aKeep the clutch pedal in the upper position using a
strap attached to the steering wheel to e

Page 238 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-59
MECHANICAL COMPONENT CONTROLS
Clutch circuit: Bleed
JH3 or JR5
37A
aPrefill the hydraulic tappet using the new syringe (by
gravity).
aRefit the part(s) concerned.V - BLEED PROCEDURE AFTER A REM