alarm RENAULT TWINGO RS 2009 2.G Electrical Equipment - Access Safety Workshop Manual

82D-20
MR-413-X44-82D000$600_eng.mif
V1
82D
ACCESS/SAFETY
Fault finding - Configurations and programming
Replacing the computer
After the injection computer or UCH has been replaced, program the immobiliser code into the new computer
(see 87B, Passenger compartment connection unit, Configuration and programming).
Access/Safety function configurations in the UCH
–Individual configuration available using the diagnostic tool, and the associated configuration should be read
Procedure to follow for modifying these configurations
–establish dialogue with the computer corresponding to the desired configuration.
–select the "repair mode" menu,
–select the "enter configuration" menu,
–select the line corresponding to the configuration to be modified,
–in the drop-down menu, select the line corresponding to the vehicle equipment level or to the customer selection
and click on "confirm",
–In the "Read configuration" menu, check that the configuration has been completed.
SR.*: Sunroof
*RF: radio frequencyEquipment required
Diagnostic toolClip
ConfigurationConfiguration
readingName of configuration Option
CF009 LC003Deadlocking WITH/WITHOUT
-LC089Memory key function WITH/WITHOUT
CF108 LC040 "Renault Anti-Intruder Device"WITH/WITHOUT
CF009 LC003 "Deadlocking"WITH/WITHOUT
CF192 LC093 "Central door locking"WITH/WITHOUT
CF195 LC097 "Type of key" STANDARD/RF*
CF229 LC126 "Alarm"WITH/WITHOUT
CF031 - "Calibration"-
CF173 LC070 "One-touch window(s)/SR*"WITH/WITHOUT
Note:
If configuration LC089 "Memory key function" is WITH and if status ET407 "Memory key" is YES, the UCH
allows the vehicle information stored in the key to be used.
MR-413-X44-82D000$600_eng.mif