display RENAULT TWINGO RS 2009 2.G Electrical Equipment - Radio R01-08 Owner's Manual

86A-70
AFTER REPAIRWhen communication is established, deal with any faults indicated.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 1
CONTINUED 10
Check the insulation, continuity and absence of
interference resistance on the following
connections:
•107X of component 261,
•107W of component 261.If the connection or connections are faulty
and there is a repair procedure (see
Technical Note 6015A, Electrical wiring
repair, Wiring: Precautions for repair),
repair the wiring, otherwise replace it. Are the checks correct?
Replace the radio, component code 261 (see MR
392 (Clio III) or MR 411 (New Twingo) Mechanical,
86A, Radio, Radio: Removal - Refitting).
Is the fault still present?The problem disappears.
Replace the display, component code 653 (see MR
392 (Clio III) or MR 411 (New Twingo) Mechanical,
86A, Radio, Display: Removal – Refitting).
I
NO
NO
YES
NO
YES

86A-71
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 2 The radio beeps every 2 seconds
NOTESUse the Wiring Diagrams Technical Note for Clio III or New Twingo.
The radio beeps every 2 seconds.
The radio is in factory mode.
Wait for 2 minutes for the radio to request
the code.
Does the radio request the code?
Enter the radio security code (see Anti-theft
code).
Is the code correct?If the radio displays a countdown in seconds,
then the code that was entered is incorrect.
Wait for the time indicated on the display for the
radio to request the code, then enter the correct
code.
The problem disappears.Was the code accepted?
Contact the Techline.
NO
YES
NO
YES
YES
NO
R108_VA4_ALP2

86A-73
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 4 Radio is switched on, but the display does not work.
NOTESNone.
Consult ALP 1 No dialogue with the computer for the multimedia interface unit (see 86D, Multimedia interface
unit, Fault finding charts).
R108_VA4_ALP4

86A-74
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 5 The radio control satellite does not operate or operates poorly
NOTESUse the Wiring Diagrams Technical Note for Clio III or New Twingo.
Has dialogue been established with the
multimedia interface unit (Display or
multimedia connection unit)?Consult ALP 1 No dialogue with the
computer for the multimedia interface unit
(see 86D, Multimedia interface unit,
Fault finding charts).
Check the condition of the radio control satellite
(see 86D, Multimedia interface unit,
Conformity check).
Are the checks correct?Contact the Techline.
NO
YES
YES
NO
A
R108_VA4_ALP5

86A-78
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 6
CONTINUED
Display PR005 Radio field intensity, then
disconnect the radio aerial and display PR005
again.
Was the radio reception different during either
of these 2 tests?Contact the Techline.
Replace the radio aerial, component code 1208
or 1874 (see MR 392 (Clio III) or MR 411
(New Twingo), Mechanical, 86A, Radio,
Radio aerial: Removal - Refitting).
If the fault is still present, replace the radio,
component code 261 (see MR 392 (Clio III) or
MR 411 (New Twingo) Mechanical, 86A, Radio,
Radio: Removal - Refitting).
A
YES
YES
NO

86A-80
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 8Backlighting does not change when the vehicle lights are
switched on
NOTESUse the Wiring Diagrams Technical Note for Clio III or New Twingo.
NOTE: Switch on the side lights and position the lighting rheostat wheel in the centre
position.
The display, component code 653, is only available when the vehicle does not have
the navigation function.
The multimedia connection unit, component code 1714, is only available when the
vehicle has the navigation function.
Check the backlighting of the following components:
radio, display and instrument panel.
Are all of the components backlit?
Attempt to backlight these components
once again, and if no conclusion can be
made, contact the Techline.
Does the instrument panel light up?Perform fault finding on the instrument
panel (see 83A, Instrument panel).
YES
NO
NO
YES
A
R108_VA4_ALP8

86A-81
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 8
CONTINUED
Does the display backlighting operate? Replace the display, component code 653
(see MR 392 (Clio III) or MR 411 (New
Twingo) Mechanical, 86A, Radio,
Display: Removal – Refitting) or the
multimedia connection unit, component
code 1714 (see MR 392 Mechanical,
83C, On-board telematics system,
Multimedia network interface unit:
Removal - Refitting).
Does the radio backlighting operate? Replace the radio, component code 261
(see MR 392 (Clio III) or MR 411
(New Twingo) Mechanical, 86A, Radio,
Radio: Removal - Refitting).
Contact the Techline.
A
YES
NO
YES
NO
YES

86A-85
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 11The radio and/or the display remains lit for 1 minute after locking
the vehicle (on New Twingo only)
NOTESNone.
Explain to the customer that this operation is normal on New Twingo.
R108_VA4_ALP11