engine RENAULT TWINGO RS 2009 2.G Engine And Peripherals User Guide

RENAULT TWINGO RS 2009 2.G Engine And Peripherals User Guide TWINGO RS 2009 2.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1710/w960_1710-0.png RENAULT TWINGO RS 2009 2.G Engine And Peripherals User Guide

Page 12 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals User Guide 10A-6
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
10A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (

Page 13 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals User Guide 10A-7
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
10A
aSet the wheels straight ahead.
aPosition the flywheel immobiliser.
aRemove the cover from the universal joint (do not

Page 14 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals User Guide 10A-8
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
10A
aRemove:
-the bolt (4) from the relay bearing flange,
-the bolts (5) from the relay bearing,
-the relay bearing.aRemov

Page 15 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals User Guide 10A-9
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
10A
aLoosen the lower bolts (7) of the subframe front tie
rods.
aRemove the upper bolts (8) of the subframe front tie
rods

Page 16 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals User Guide 10A-10
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
10A
aRemove the subframe bolts (13) one by one, replac-
ing them in turn with the threaded rods of the tool
(Tav. 1233-01

Page 17 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals User Guide 10A-11
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
10A
aApply:
-four beads (17) of SILICONE ADHESIVE SEAL-
ANT  (see Vehicle: Parts and consumables for
the repair) (04B, Co

Page 18 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals User Guide 10A-12
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
10A
-the subframe rear bolts (105 Nm),
-the subframe rear tie rod inner bolts (21 N.m),
-the subframe rear tie rod outer

Page 19 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals User Guide 10A-13
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
D4F or D7F
10A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and li

Page 20 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals User Guide 10A-14
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
D4F or D7F
10A
-the front wheel arch liners (see Front wheel arch
liner: Removal - Refitting) (55A, Exterior protec-
tion).
a

Page 21 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals User Guide 10A-15
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
D4F or D7F
10A
aAttach the cooling radiator to the upper cross mem-
ber.
aRemove:
-the bolts (6) from the front end cross mem
Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 ... 460 next >