16A-7V2 MR-413-X44-16A000$750.mif
16A
New Twingo
ALP1 The starter does not work
NOTESTest the condition of the battery (see 80A, Battery).
Test the condition of the power fuse (see TEST 2).
Check that fuse F9 on component 1016 is in good condition.
Check that the engine is not jammed.
Check that the following terminals are
correctly tightened:
⇒ the battery
⇒ starter
⇒ engine earth
⇒ bodywork earth
Retighten the terminals (see MR 411, 80A,
Battery, Battery: Removal - Refitting).
Are the terminals correctly tightened?
Check that the following wires are in good
condition:
⇒ the wire connecting the battery +,
component 107, to terminal B+ of the
starter, component 163,
⇒ the wire connecting the battery - to
the bodywork earth,
⇒ the wire connecting the engine to
the bodywork earth.Repair the damaged wires and terminals. If the
connection is faulty and if there is a repair
procedure (see Technical Note 6015A, repairing
electrical wiring, wiring: Precautions for
repair), repair the wiring otherwise change the
wiring. Are the wires in good condition?
Try starting.
If the starter still does not turn, can a clicking
noise be heard when the starter is
activated?
NO
YES
NO
YES
NO
A
YES
B
STARTING-CHARGING
Fault finding – Fault finding charts
16A-11V2 MR-413-X44-16A000$750.mif
STARTING-CHARGING
Fault finding – Fault finding charts16A
New Twingo
ALP1
CONTINUED 4
Check for 12 V on relay 232 between
connection 1A of component 232 and a
chassis earth when starting is requested.
Is there 12 V?Replace the starter relay (see MR 411
Mechanical, 81C, FUSES, Engine
compartment fuse and relay box: List and
location of components).
Continuity and/or insulation fault on
connection 1A between components 232 and
163. If there is a repair method (see Technical
Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair) repair the
wiring, otherwise replace it.
D
YES
NO
YES
