RENAULT TWINGO RS 2009 2.G General Vehicle Information Service Manual

04B-6
CONSUMABLES - PRODUCTS
Vehicle: Parts and consumables for the repair
04B
GREASE
WHITE GREASE 400 ml aerosol77 11 236 174
OPENING ELEMENT MECHA-
NISM GREASE20 g sachets77 11 419 865
SILICONE LUBRICANT 500 ml aerosol77 11 236 168
SILICONE-FREE LUBRICANT 500 ml aerosol77 11 236 167
SOUNDPROOFING
SPR GREY EVOLUTION 1 l cartridge77 11 419 114
SPR GREY EVOLUTION SPRAY 400 ml aerosol77 11 419 116
SPR BLACK EVOLUTION II 1 l cartridge77 11 419 115
SOUNDPROOFING PAD (3.5 Kg/
m²)Pack of 10 77 01 423 546
SOUNDPROOFING PAD (6.5 Kg/
m²)Pack of 5 77 01 423 269
POLISHING
POLISHING LIQUID 1 L container77 11 420 288
FINISHING LIQUID 1 L container77 11 420 289
MASTIC
Universal mastic
GALAXI 2.5 kg pack77 11 172 238
OPTIMAX 1.23 l cartridge77 11 172 239
EXCELLENCE +
For finishing plastic repair960 g car tridge77 11 423 539
1 kg pack77 11 423 540
Plugging mastic
XFIBRE FIBREGLASS MASTIC 975 kg pack77 11 172 235
STANDARD BASIX POLYESTER
MASTIC1.975 kg pack77 11 172 234
ALUX ALUMINIUM MASTIC 975 kg pack77 11 172 236
Sprayable mastic
PIXTO SPRAYABLE POLYESTER
MASTIC1.5 kg tin77 11 172 237
Finishing mastic
IXTRA POLYESTER MASTIC 1.625 kg pack77 11 172 233
Anti-grit mastic

04B-7
CONSUMABLES - PRODUCTS
Vehicle: Parts and consumables for the repair
04B
MAG PRO 1 310 ml cartridge77 11 172 679
MAG PRO 3 (Dual component)1.5 kg tin77 11 218 364
SURFACE CLEANER
HEPTANE 500 ml container77 11 170 064
SOLVENT SURFACE CLEANER 5 L container77 01 404 178
WATER-BASED SURFACE
CLEANER5 L container77 11 421 337
ANTISTATIC THINNER (for plastic
materials)400 ml aerosol77 01 408 493
COMPOSITE MATERIAL REPAIR BY BONDING
PLASTIC REPAIR KIT 77 11 170 064
NOZZLE FOR PLASTIC REPAIR
KIT77 11 423 523
PLASTIC REPAIR CLEANER 1 L container77 11 423 517
PLASTIC REPAIR PRIMER 150 ml bottle77 11 423 518
PLASTIC REPAIR ADHESIVE 2 x 25 ml bicomponent cartridge77 11 423 519
PLASTIC REPAIR CLOTH 90 m roller77 11 423 520
PLASTIC REPAIR NOZZLES 12 nozzles 77 11 423 522
COMPOSITE MATERIAL REPAIR BY WELDING
PLASTIC WELD REPAIR SET 77 11 425 742
PROTECTIVE STRIPSBag of 10 protective strips77 11 425 744
STAINLESS STEEL MESHBag of 2 meshes77 11 425 743
COOLER 400 ml aerosol77 11 425 745
BRUSHBox of 10 brushes77 11 237 793
WINDOW MASKING TAPE
10 MM WINDSCREEN TAPE 77 11 171 708
20 MM WINDSCREEN TAPE 77 11 171 709
PROTECTIVE WELDING
ANTI-SPLASH SPRAY 400 ml aerosol77 11 218 270
SPECIFIED UNDERCOAT
PRE-TREATMENT PRIMER WITH-
OUT ZINC CHROMATE (I-Alpha) +
THINNER1 L container77 11 420 027 (Primer)
77 11 420 028 (Thinner)

04B-8
CONSUMABLES - PRODUCTS
Vehicle: Parts and consumables for the repair
04B
I-PREMIA REACTIVE PRIMER (do
not use on aluminium)3.5 l container77 11 239 243 (Primer)
77 11 228 654 (Thinner)
I-PREMIA REACTIVE PRIMER (do
not use on aluminium)400 ml aerosol77 11 419 416
ADHÉRA SPRAY (adhesion pro-
moter for thermoplastics)400 ml aerosol77 11 423 734
PRIMARA BLACK (adhesion pro-
moter/pr imer for thermoplastics)1 L container77 11 423 735
77 11 171 514 (Activator)
PRIMARA (adhesion promoter/
primer for thermoplastics)1 L container77 11 171 513
77 11 171 514 (Activator)
UNDERCOAT
LEVIA 3.5 l container77 11 228 651
FORTIA 3.5 l container77 11 228 650

04E-1
PAINT
Anti-corrosion protection product: Description
04E
I - POINTS LOCATED INSIDE THE VEHICLE
Side impact:
-replacing or repairing the sill panel:
•protection of the join between the inner sill panel and
the sill panel reinforcement: injection of wax into
points (1) and (2) ,
•protection of the join between the sill panel and the
sill panel closure: injection of wax into points (4) and
(5) .
-replacing the quarter panel lining:
•injection of wax into points (16) and (17) .
-replacing the centre side member beneath the floor:
•injection of wax into points (6) , (8) and (7) .
121909
Note:
Hollow body parts to be treated from inside the
vehicle must be treated after painting and before
retrimming.

04E-2
PAINT
Anti-corrosion protection product: Description
04E
II - POINTS BENEATH THE VEHICLE
Frontal impact:
-replacing or repairing the front side member, the front
side member closure panel and the front sub-frame
mounting unit:
•injection of wax into points (3) and (9) .
-replacing the front side cross member or the front half
unit:
•injection of wax into points (10) and (11) .
Rear impact:
-replacing the complete rear side member:
•injection of wax into points (12) and (13) .
-Replacement of the rear end panel:
•injection of wax into point (15) .-replacing the rear floor centre cross member:
•injection of wax into points (13) and (14) .
III - PRODUCTS AND EQUIPMENT FOR TREATING
HOLLOW SECTIONS
The products and equipment required for carrying out
this work are available from the Parts Department.
121910
Note:
Blanking pieces are fitted to the injection points
located beneath the vehicle. When any work is car-
ried out on the vehicle, plug all the points used for
injection. Replace any damaged or deformed blank-
ing pieces with new ones.

04E-3
PAINT
Anti-corrosion protection product: Description
04E
« PAC1, PAC2 » kit
The hollow body parts of the structure of the vehicle
are protected in the factory by injecting hot wax. To
guarantee equivalent protection after repair, inject one
after the other the two complementary products which
make up a « PAC1, PAC2 » kit.
After injection, all the orifices must be covered using
blanking covers moulded to fit each one.
The necessary information concerning blanking covers
can be found in the Parts Catalogue for the vehicle.
Injector assemblyProtective wax
The subframe under the floor is protected with a spe-
cial wax.
IV - OPERATING PROCEDURE FOR TREATING
HOLLOW SECTIONS
Insert the nozzle tip until it reaches the end of the hol-
low section (21) .
Inject the wax whilst retracting the nozzle tip (22) .
272-2
272-1
(18) Wax flow control
(19) Quick-release union end piece
(20) Interchangeable injection hose
272
109692