tire type RENAULT TWINGO RS 2009 2.G General Vehicle Information Workshop Manual

02A-2
LIFTING EQUIPMENT
Vehicle: Towing and lifting
02A
To mount the vehicle onto axle stands, lift the entire ve-
hicle on one side and the axle stands must be placed
under zones (1) and (2) designed for positioning the
tool kit jack.
III - LIFTING ON A LIFT
1 - Safety advice reminder
To remove heavy components from the vehicle (engine
and transmission assembly, rear axle, gearbox), use a
four-post lift.
If the vehicle is on a two-post lift, there is a danger that
it will tip after removal of these types of components.
Fit the safety strap(s) available from Spare Parts De-
partment. WARNING
To avoid any damage to the original protection, use
equipment fitted with rubber pads to prevent the
equipment coming into direct contact with the vehi-
cle.
To avoid any damage to the axle assemblies, the
vehicle must not be raised using the front suspen-
sion arms for suppor t or under the rear axle.
120614
120616
14894