stop start RENAULT TWINGO RS 2009 2.G Heating And Air Conditioning - Heating Workshop Manual

61A-11
MR-413-X44-61A000$625_eng.mif
V1
61A
HEATING
Fault finding - Conformity check
SUB-FUNCTION: HEATING
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool
(fault reading and configuration checks).
Test conditions: engine stopped, ignition on.
ComputerParameter or Status
checked or ActionDisplay and
notesFault finding
UCH (see 87B,
Passenger
compartment
connection unit)ET015:Passenger
compartment
blowerINACTIVE
(according to test conditions:
see Notes).In the event of a fault, refer to the
interpretation of this status.
Note: This status only operates for
manual air conditioning and
heating versions.
PR001: Battery voltage10.5 V < X < 14.4 VIf there is a fault, refer to the
interpretation of this parameter
If the fault is still present, carry out
fault finding on the charging circuit
(see MR 411 Mechanical, 16A,
Starting - charging circuit).
PR002: Exterior
temperature
(depending on
equipment)X = exterior temperature ± 5 °C
(invalid value: 215 °C)If there is a fault, refer to the
interpretation of this parameter
PR024: Engine coolant
temperatureX = engine coolant
temperature in ˚CIn the event of a fault, see the
interpretation of this parameter.
ET239: Ignition switch
position+ after ignition feedIn the event of a fault, refer to the
interpretation of this status.
PR025: Engine speed0 rpmIf there is a fault, refer to the
interpretation of this parameter
MR-413-X44-61A000$625_eng.mif