air condition Seat Alhambra 2005 Owner's Manual
[x] Cancel search | Manufacturer: SEAT, Model Year: 2005, Model line: Alhambra, Model: Seat Alhambra 2005Pages: 272, PDF Size: 6.35 MB
Page 8 of 272

6Content
C
Co
on
nt
te
en
nt
t
This manual is structured to give you the information you need as quickly
and clearly as possible. The contents of this Manual are grouped into
relatively shorts se
ec
ct
ti
io
on
ns
s
making up c ch
ha
ap
pt
te
er
rs
s
(e.g.“Air conditioning”). The
entire manual is divided into five large parts which are:
1 1.
. SSa
af
fe
et
ty
y FFi
ir
rs
st
t
Information on the vehicle equipment relating to passive safety such as seat
belts, airbags, seats, etc.
2 2.
. CCo
on
nt
tr
ro
ol
ls
s aan
nd
d eeq
qu
ui
ip
pm
me
en
nt
t
Information about the distribution of controls in the driver position of the
vehicle, about the seat adjustment possibilities, how to create a suitable
climate in the passenger compartment, etc.
3 3.
. TTi
ip
ps
s aan
nd
d MMa
ai
in
nt
te
en
na
an
nc
ce
e
Advice relating to driving, care and maintenance of your vehicle and certain
problems which you may solve yourself.
4 4.
. TTe
ec
ch
hn
ni
ic
ca
al
l DDa
at
ta
a
Figures, data, dimensions and measurements (for example fuel
consumption) of your vehicle.
5 5.
. AAl
lp
ph
ha
ab
be
et
ti
ic
c iin
nd
de
ex
x
At the end of this manual there is a detailed alphabetical index, thiswill
help you to rapidly find the information you require.K
Page 133 of 272

Seats and luggage compartment129
Safety FirstControls and equipment Tips and Maintenance Technical Data
Passenger side storage compartment
The compartment can be opened by pulling the lever. It is locked
when the key slot* is horizontal.
V Ve
eh
hi
ic
cl
le
e wwa
al
ll
le
et
t cco
om
mp
pa
ar
rt
tm
me
en
nt
t
The vehicle wallet should always be kept in this compartment.
C Co
oo
ol
li
in
ng
g tth
he
e sst
to
ow
wa
ag
ge
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t oon
n tth
he
e ffr
ro
on
nt
t ppa
as
ss
se
en
ng
ge
er
r ssi
id
de
e
There is an air outlet on the right of the rear panel
⇒ fig. 128. If the
air conditioning is switched on, cooled air can be fed into the
compartment. Turn the air vent to open and close it.
D Dr
ri
in
nk
k cca
an
n hho
ol
ld
de
er
r*
*
There are two cup holders in the central console.
To open briefly press in the direction of arrow
1. The cup holder
springs open.
To close press in the direction of arrow
2until it is completely
closed.
Fig. 128
Fig. 129
AUTOECON
B7M-0015
A Al
lw
wa
ay
ys
s kke
ee
ep
p tth
he
e sst
to
ow
wa
ag
ge
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t cco
ov
ve
er
r ccl
lo
os
se
ed
d wwh
hi
il
le
e tth
he
e vve
eh
hi
ic
cl
le
e iis
s iin
n
m mo
ot
ti
io
on
n tto
o rre
ed
du
uc
ce
e tth
he
e rri
is
sk
k oof
f iin
nj
ju
ur
ry
y ddu
ur
ri
in
ng
g aa ssu
ud
dd
de
en
n bbr
ra
ak
ki
in
ng
g mma
an
no
oe
eu
uv
vr
re
e oor
r
i in
n tth
he
e eev
ve
en
nt
t oof
f aan
n aac
cc
ci
id
de
en
nt
t.
.
K
W WA
AR
RN
NI
IN
NG
G
12
AL0-034
Page 136 of 272

Climate control132
1Display for blower speed for f fr
ro
on
nt
t sse
ea
at
ts
s
2Display AUTO (automaticmode), ECON (compressor off) or OFF
(entire system off)
3Display for ambient temperature
4Display for defrosting windscreen
5Display for air recirculation for f fr
ro
on
nt
t sse
ea
at
ts
s
6Display for air flow direction f fr
ro
on
nt
t
7Display for selected temperature f fr
ro
on
nt
t
8Blower speed indicator f fr
ro
on
nt
t
9Display for selected temperature r re
ea
ar
r
10Button for Automaticoperation (complete system).
11Button for defrosting windscreen.
12Button for air recirculation f fr
ro
on
nt
t sse
ea
at
ts
s
.
13Button for “Blower faster” f fr
ro
on
nt
t
14Button for “Blower slower” f fr
ro
on
nt
t
and button for air conditioner
“OFF” front
15Button for “Air flow to upper part of body” f fr
ro
on
nt
t
16Button for “Air flow to footwell” f fr
ro
on
nt
t
Controls
AUTO
15c22c22c
14
13
12
11
16
15
18
17
20
19
22
21
23
10
2134
5
6789
AL0-115Fig. 131
Page 137 of 272

Climate control133
Safety FirstControls and equipment Tips and Maintenance Technical Data
17Button for “Warmer” f fr
ro
on
nt
t
18Button for “Colder” f fr
ro
on
nt
t
19Button for “Blower faster” r re
ea
ar
r
20Button for “Blower slower” r re
ea
ar
r
and button for air conditioner
“OFF” r re
ea
ar
r
21Button for “Warmer” r re
ea
ar
r
22Button for “Colder” r re
ea
ar
r
23ECON button (complete system off)
When the appropriate buttons are pressed the displays
1, 2, 7,8and 9change or the displays4, 5and 6appear.
T Th
he
e aau
ut
to
om
ma
at
ti
ic
c rre
eg
gu
ul
la
at
ti
io
on
n oof
f tth
he
e ssy
ys
st
te
em
m cca
an
n bbe
e iin
nf
fl
lu
ue
en
nc
ce
ed
d bby
y tth
he
e
b bu
ut
tt
to
on
ns
s
11-
-16,
, 19a
an
nd
d 20.
.K
Climatronic for the driver’s compartment (front)
T
Th
he
e ffo
ol
ll
lo
ow
wi
in
ng
g sst
ta
an
nd
da
ar
rd
d sse
et
tt
ti
in
ng
g iis
s rre
ec
co
om
mm
me
en
nd
de
ed
d ffo
or
r aal
ll
l tti
im
me
es
s oof
f tth
he
e
y ye
ea
ar
r:
:
T Te
em
mp
pe
er
ra
at
tu
ur
re
e aab
bo
ou
ut
t 222
2°
°C
C ((7
72
2°
°F
F)
) aan
nd
d AAU
UT
TO
O bbu
ut
tt
to
on
n.
.
With this setting a pleasant climate in the vehicle is reached most
quickly.
This setting should therefore only be altered when required for
personal comfort.
Arrangement of vents
⇒page 139.K
Using the system
When ignition has been switched on the system normally works in
the automaticmode. Displays1, 2, 3, 7, 8and 9appear.
The Climatronicmaintains the selected vehicle interior temperature
fully automatically.
To do this, the temperature of the air flow as well as the blower
speed (air volume) and air distribution are altered automatically.
The system also takes account of intense sunlight. This eliminates
the need for a manual re-adjustment.
If the settings deviated from Automaticoperation before the
ignition is switched off the selected functions are permanently
stored. Only the function “air recirculation” is cancelled after about
20 minutes.
K
Page 138 of 272

Climate control134
• The interior temperature can be freely selected with buttons17
and 18and is stored permanently until another temperature is
selected.
The interior temperature can be set between +18°C (64°F) and
+29°C (86°F). In this range it is automatically regulated.
If temperatures below +18°C (64°F) are selected “LO” appears in
the display. With temperatures above +29°C (86°F) “HI” is
displayed.
In these two end positions the system works continuously at
maximum cooling or heating output. The temperature is not
regulated.• If the blower speed is changed up or down a stage, automatic
mode is still retained.
• In certain operating conditions it may be found that the system
temporarily carries out functions which are not quite as expected.
This includes, for example, that for a few seconds after starting
from cold, air is directed mainly into the footwell. This is intentional
so that damp air in the system does not cause the windows to mist
up.
K
Notes on Automatic mode (AUTO)
AUTO
15c22c22c
14
13
12
11
16
15
18
17
20
19
22
21
23
10
2134
5
6789
AL0-115Fig. 132
Page 139 of 272

Climate control135
Safety FirstControls and equipment Tips and Maintenance Technical Data
Partial deviation from Automatic mode
In nearly all cases the Automatic mode offers the best conditions
for the comfort of the vehicle occupants all the year round.
In isolated cases however it can be necessary to move away form
certain functions of the automatic mode by pressing various
buttons. The Climatronicstill works automatically.
The blower speed and thus the air volume at the front can be
increased or reduced with buttons
13and 14. This is shown by a
change in the number of lines in display position 1.
• By pressing button
11
– the ECON operation is switched off
– the air recirculation mode is switched off
– the windscreen and side windows can be defrosted or kept free
of misting (direct vents
4onto side windows)
– the dehumidifying and defrosting effect for the windscreen can
be increased if, for example persons with damp clothing are picked
up shortly after moving off.
• A Ai
ir
r rre
ec
ci
ir
rc
cu
ul
la
at
ti
io
on
n
for the front is selected by pressing button
12.
The symbol5appears in the display.
The air recirculation function prevents strong outside smells
entering the vehicle, for example when driving through a tunnelor
standing in a trafficjam.Air recirculation can also be selected if the vehicle is to be heated
or cooled quickly. In this mode, air is drawn in from the vehicle
interior and heated or cooled.
Smoking should be avoided when air recirculation is selected, as
the smoke drawn in from the vehicle interior deposits on the
evaporator of the Climatronic. This leads to permanent odours
when the Climatronicis in operation. These can only be eliminated
by exchanging the evaporator, which is time-consuming and
expensive.
• With buttons
15and 16the air flow can be to the upper part of
the body or into the footwell.
• The combination of buttons
11and 16can be used to direct the
air flow both to the windscreen and into the footwell.
• The combination of buttons
15and 16can be used to direct the
air flow both to the upper body and into the footwell.
• Button
23( (E
EC
CO
ON
N)
) ssw
wi
it
tc
ch
he
es
s tth
he
e cco
oo
ol
li
in
ng
g ssy
ys
st
te
em
m oof
ff
f
. In this mode,
the heating is automatically regulated (without air dehumidifying
and cooling), with the desired interior temperature being attained
as quickly as possible and maintained.
T Th
he
e aai
ir
r rre
ec
ci
ir
rc
cu
ul
la
at
ti
io
on
n mmo
od
de
e ssh
ho
ou
ul
ld
d nno
ot
t bbe
e uus
se
ed
d ffo
or
r aan
n eex
xt
te
en
nd
de
ed
d ppe
er
ri
io
od
d aas
s nno
o
f fr
re
es
sh
h aai
ir
r iis
s ddr
ra
aw
wn
n iin
n aan
nd
d tth
he
e wwi
in
nd
do
ow
ws
s cco
ou
ul
ld
d mmi
is
st
t uup
p.
.
W
WA
AR
RN
NI
IN
NG
G
Page 146 of 272

Climate control142
General notes
• Ensure that the sensor on the air grille next to the display is not
covered up.
• To ensure that the Climatroniccan work properly, the air inlet in
front of the windscreen should be kept free of ice, snow and
leaves.
• The heat output depends on the coolant temperature – the full
heat output is therefore available when the engine is warm.
• Odours caused by a build-up of natural deposits in the vaporiser
can occur if the AUTO system has not been used for some time. The
cooling system should be turned on at fullblast at least once a
month – even during cold spells – to clear or to prevent the
odours.
• The stale air escapes through openings in the luggage
compartment side panels. Therefore when loading the luggage
compartment ensure that the openings are not covered.
• When the ambient temperature is high and the air very humid,
condensed water can drip off the evaporator and form a puddle
under the vehicle. This is quite normal and does not indicate a
leak.
• To prevent the windows from misting up the blower should be
running slowly when driving at low speeds. To do this select ECON
or AUTO.
K
Using Climatronic economically
In cooling operation the Climatronic compressor places demands
on the engine and therefore influences the fuel consumption. Tokeep the period switched on as short as possible, the following
points should be noted:
• If the inside temperature is very high after the car has been
parked in the sun, it is recommended to open doors or windows
briefly to enable the hot air to escape.
• The compressor should not be switched on during a journey if
the windows or sliding roof* are open.
• ECON mode should be selected if the desired interior
temperature can be attained without switching on the air
conditioner.
K
Operating faults
• If all the symbols in the display area flash for some 15 seconds
after switching the ignition on, there is a fault in the system.
Contact a Technical Service Centre.
• Should the cooling system not work at any time, either:
– the ambient temperature is below about +5 °C,
– the Climatronic compressor has switched off due to coolant
temperature being too high.
– or the fuses have blown.
Check the fuse and if necessary replace
⇒"Fuses" chapter. If the
trouble is not due to a defective fuse, have Climatronic checked.
• If the cooling output drops off, switch the Climatronic off and
have the system checked.
K
Page 176 of 272

172Your vehicle and the environment
Suggestion 9. Save electricity
The alternator generates electricity while driving. The more
electricity is used, the higher the fuel consumption.
The heated rear window, extra lights, the heater fan and air
conditioning* use a large amount of energy. The heated rear
window creates a consumption of approx. one liter for every 10
hours.
For this reason, disconnect electrical consumers as soon as they
are no longer needed. The alternator generates electricity when the
engine is running.
K
Suggestion 10. Written check-up
If you wish to reduce fuel consumption keep a trip book. It is not
much work and is worth while since it allows you to detect possible
consumption variations (positive or negative) on time and
intervene, if necessary. If you detect an increase in consumption
you should examine the driving conditions since the last filling.
K
Page 178 of 272

174Your vehicle and the environment
A6 mounting points
Bat least 65 mm
All dimensions in mm.
• Technical Service Centres are fully equipped with the necessary
information and expertise for the retrofitting of towing devicesand
the concurrent requirements for reinforcing the cooling system. For
these reasons, it is best to have the fitting done by a Technical
Service Centre.
K
Driving tips
• • TTh
he
e tto
ow
wi
in
ng
g dde
ev
vi
ic
ce
e iis
s aa ssa
af
fe
et
ty
y eel
le
em
me
en
nt
t aan
nd
d yyo
ou
u ssh
ho
ou
ul
ld
d tth
he
er
re
ef
fo
or
re
e
o on
nl
ly
y uus
se
e aa dde
ev
vi
ic
ce
e ssp
pe
ec
ci
if
fi
ic
ca
al
ll
ly
y dde
es
si
ig
gn
ne
ed
d ffo
or
r yyo
ou
ur
r vve
eh
hi
ic
cl
le
e aan
nd
d wwh
hi
ic
ch
h
i is
s ddu
ul
ly
y aap
pp
pr
ro
ov
ve
ed
d.
.
O Op
pe
er
ra
at
ti
io
on
ns
s iin
ns
st
tr
ru
uc
ct
ti
io
on
ns
s
• The removable ball coupling of the towing bracket* may be
stored in the right-hand rear of the boot.
•Additional mirrors are required if the traffic behind the trailer is
not visible with the exterior mirrors fitted as standard. Both exterior
mirrors must be attached to brackets in such a way that a sufficient
field of vision to the rear is guaranteed at all times.
•The permitted trailer weight must not be exceeded under any
circumstances
⇒chapter “Technical Data”.
•When using a trailer on mountain routes you must bear in mind
that the tow loads given in the “Technical data” chapter are onlyapplicable for slopes of 10% to 12%. If you do not use the full tow
load you may drive up steeper slopes.
•The given trailer weights are only applicable for altitudes up
to 1000 m above sea level. As the engine output drops due to
the decreasing air density, the climbing ability must also be
reduced by 10% for each further 1000 m.
•Where possible make full use of the maximum permissible
drawbar weight on the ball of the towing bracket but do not exceed
it
⇒chapter “Technical Data”.
•While observing the permissible trailer and drawbar weight,
distribute the load in the trailer so that heavyobjects are as near
as possible to the axle. The objects must also be secured so that
they cannot slip about.
•The tyre pressures on the towing vehicle must be adjusted for full
load conditions, and also check the pressures on the trailer.
•Headlight settings should be checked, with the trailer attached,
before beginning the journey and adjusted as necessary.
On vehicles with headlight beam control it is only necessary to turn
the knurled disc on the dash board in the appropriate direction.
D Dr
ri
iv
vi
in
ng
g iin
ns
st
tr
ru
uc
ct
ti
io
on
ns
s
To obtain the best possible handling of vehicle and trailer, the
following should be noted:
• Try to avoid driving with an unladen vehicle and a loaded trailer.
If this cannot be avoided, only drive slowly to allow for the
unfavourable weight distribution.
Page 180 of 272

176Your vehicle and the environment
D
Dr
ri
iv
vi
in
ng
g aab
br
ro
oa
ad
d
Observations
If the vehicle is to be taken abroad, the following must also be
borne in mind:
• If the vehicle has a petrol engine and catalytic converter, one
must ensure that unleaded petrol will be available during the
journey
⇒"Filling the tank" chapter. The automobile clubs offer
information about the unleaded filling station network.
•In some countries it is possible that a vehicle model is sold under
conditions where some spare parts are not available or that the
Technical Services may only carry out limited repairs.
SEAT importers and distributors will gladly provide information
about the technical preparation of your vehicle in addition to
necessary maintenance and repair possibilities.
K
Headlight covering
When traveling abroad in a country where driving is on the
opposite side to the home country, asymmetric headlights will
dazzle oncoming traffic.
To prevent this, headlights must be adjusted or some areas must
be covered with an opaque adhesive strip depending on the
model. For more information, contact your Technical Service
Centre.
K