warning Seat Alhambra 2010 Workshop Manual

Cockpit73
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
Main menuMFI display menu
The multifunction display (MFI) has two automatic memories: 1 - Partial
memory and 2 - Total memory. The selected memory will be shown in the
upper right-hand corner of the display.MenuFunctionSee
MFIInformation and possible configurations of the
multifunction display (MFI).Ÿpage 73
Audio
If the radio is on, the station is displayed.
In CD mode, the current CD is played.
ŸBooklet
“Radio” or
ŸBooklet
“navigation
system”
NavigationNavigation system information:
when the navigation to destination is on,
change of direction arrows and a proximity bar
are displayed. These symbols are similar to
those used in the navigation system.
If navigation to destination is not on, the direc-
tion of travel (compass) and the name of the
street on which you are driving are displayed.ŸBooklet
“Navigation
system”
Parking
heatingInformation and configurations of the parking
heating:
switching the parking heating on or off. Select
the operating mode and duration.Ÿpage 187
Vehicle
conditionCurrent warning or information texts.
This option only appears when one of the fol-
lowing texts is available. The number of availa-
ble messages is displayed. Example 1/1 or
2/2.Ÿpage 64
SettingsDifferent setting options, for example, the Con-
venience, Lighting & or Visibility menus, and
the time, speed warning with winter tyres, lan-
guage, units of measurement, or “Display off”.Ÿpage 75
With the ignition switched on, and memory 1 or 2 displayed, briefly press
to change from one memory to another.
1
Trip mem-
ory (for a
single jour-
ney).
The memory stores the values for the journey and the con-
sumption from the moment the ignition is switched on until
it is switched off again.
If the journey is broken for more than two hours, the mem-
ory is automatically erased. If the journey is continued in
less than two hours after the ignition is switched off, the
new data is added to the data already stored in the mem-
ory.
2Total mem-
ory (for all
journeys).
The memory records the values for a specific number of
partial trips, up to a total of 19 hours and 59 minutes or 99
hours and 59 minutes, or 1999.9 km (or miles) for 9999 km
(or miles), depending on the model of instrument panel.
On reaching either of these limits, the memory is automati-
cally erased and starts to count from 0 again.
OK

Cockpit 74
Possible displays
Changing between display modes
xIn vehicles without multifunction steering wheel: press the lever.
xVehicles with a multifunction steering wheel: press or .
Storing a speed for the speed warning
xSelect the display Speed warning at --- km/h.
xPress to store the current speed and switch off the warning.
xIn addition, set the required speed by pressing the rocker switch on the
windscreen wiper lever or buttons or on the multifunction steering
wheel for 5 seconds. Next, press again or wait a few seconds. The speed
is stored and the warning activated.
xTo switch off, press . The stored speed is deleted.
Manually erasing memory 1 or 2
xSelect the memory to be erased.
xPress and hold for approximately two seconds.
Personalising the displays
It is possible to select which of the displays in the multifunction display you
wish to see on the instrument panel in the settings menu. The units of meas-
urement can also be modified Ÿpage 75.
MenuFunction
Journey durationThis indicates the hours (h) and minutes (min) since
the ignition was switched on.
Current fuel
consumptionThe current fuel consumption while driving is dis-
played in l/100 km (or miles per gallon, mpg); when
the engine is running but the vehicle is not moving,
in l/h (or gallons per hour).
Average fuel
consumptionWhen the ignition is switched on, the average con-
sumption (in l/100 km or in mpg) is displayed after
the vehicle has moved approximately 100 metres
(328 feet). Otherwise horizontal lines are displayed.
The value shown is updated approximately every 5
seconds.
Distance to empty
(the distance you
can travel with the
remaining fuel)Approximate distance in km (or miles) that can still
be travelled with the fuel remaining in the tank,
assuming the same style of driving is maintained.
This is calculated using the current fuel consumption.
Distance coveredDistance travelled, after ignition is switched on, in km
(or miles).
Average speedAfter the ignition is switched on, the average speed
will be shown after a distance of approximately 100
metres (328 feet) has been travelled. Otherwise hori-
zontal lines are displayed. The value shown is
updated approximately every 5 seconds.
Digital display of
speedCurrent speed displayed digitally.
Oil temperature
digital displayUpdated engine oil temperature digital display
Speed warning
to --- km/hIf the stored speed is exceeded (between 30 - 250
km/h, or 18 - 155 mph), an audible warning is given
together with a visual warning.
MenuFunction
*+
OK
*+OK
OK
OK

Cockpit75
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
Configuration Menu
Configuration
MenuFunction
Multifunction
display dataConfiguration of the multifunction display data which you
wish to see on the instrument panel display Ÿpage 73.
CompassChanging the magnetic region and calibration of the com-
pass. To calibrate the compass, please follow the instruc-
tions given on the instrument panel display.
ConvenienceChanging vehicle convenience functions Ÿpage 76.
Lights &
visibilityConfiguration of vehicle lighting Ÿpage 77.
TimeChanging the hours and minutes of the clock and the nav-
igation system. The time can be set here and the choice
can be made between the 24 hour and 12 hour display.
The S in the upper part of the display indicates that the
clock is set to summer time.
Winter tyresChanging the visual and audible speed warnings. This
function should only be used when the vehicle is fitted
with winter tyres, which are not designed for travel at
high speeds.
Settings:
LanguageChanging the language of the display texts and the navi-
gation system.
UnitsChanging the units of measurement for the temperature,
consumption and distance.
Second speedSwitching second speed display on and off
AutoholdSelecting whether the Auto-Hold function should remain
on permanently.
Travel modeChanging the headlamps for countries in which vehicles
are driven on the other side of the road. When the “mark”
is activated, the headlamps of a left-hand drive vehicle
are adjusted for driving on the left. The travel mode can
only be used for short periods of time.
ServiceCheck the service notifications or reset the service inter-
vals to zero
Manufacturer's
settings Some functions of the Configuration menu will be reset
to the factory value.
BackThe main menu is displayed again.
Configuration
MenuFunction

Unlocking and locking 78
Unlocking and locking
Vehicle key set
Introduction
Additional information and warnings:
xAdjustments to the SEAT information system Ÿpage 70
xCentral locking and locking system Ÿpage 83
xStart and stop the engine Ÿpage 195
xNotes for the user Ÿpage 283
xEmergency locking and unlocking Ÿpage 348
WARNING
Careless or incorrect use of vehicle keys may result in severe injury and
accident.
xAlways take all the keys with you whenever you leave the vehicle. Chil-
dren and unauthorised individuals could lock the doors or the tailgate,
start the engine or turn the ignition on activating electrical systems, for
example: the electric windows.
xNever leave children or disabled people alone in the car. They could be
trapped in the car in an emergency and will not be able to get themselves
to safety. For example, depending on the time of the year, temperatures
inside a locked and closed vehicle can be extremely high or extremely low
resulting in serious injuries and illness or even death, particularly for
young children.
xNever remove the key from the ignition if the vehicle is in motion. The
steering may lock and it will not be possible to turn the steering wheel.

Unlocking and locking83
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
Central locking and locking system
Introduction
Central locking functions correctly when all the doors and the tailgate are
correctly shut. If the driver's door is open, the vehicle cannot be locked with
the key.
The battery of a vehicle left unlocked during a long period (for instance, in a
private garage) may run down and fail to start the motor.
Additional information and warnings:
xPersonal convenience settings in the SEAT information system Ÿpage 70
xVehicle key set Ÿpage 78
xSliding doors Ÿpage 92
xElectric windows Ÿpage 102
xPanorama sliding sunroof Ÿpage 106
xTo wi ng m o d e Ÿpage 260
xEmergency locking and unlocking Ÿpage 348
WARNING
The incorrect use of the central locking system may cause serious injuries.
xThe central locking system will lock all doors. A vehicle locked from the
inside can prevent any non-authorised individual from opening the doors
and accessing the vehicle. Nevertheless, in case of emergency or accident,
locked doors will complicate access to the passenger compartment to help
the passengers.
xNever leave children or disabled people alone in the vehicle. The central
locking button can be used to lock all the doors from within. Therefore,
passengers will be locked inside the vehicle. Individuals locked in the
vehicle can be exposed to very high or very low temperatures.
xDepending on the time of the year, temperatures inside a locked and
closed vehicle can be extremely high or extremely low resulting in serious
injuries and illness or even death, particularly for young children.
xNever leave individuals locked in a closed and locked vehicle. In case of
emergency, they may not be able to exit the vehicle by themselves or get
help.
WARNING (continued)

Unlocking and locking 88
Note
If the vehicle battery or the battery in the vehicle key is flat, it is possible that
the vehicle cannot be locked or unlock using the KESSY system.
"Safe" security system
When the vehicle is locked, the "Safe" security system deactivates the door
handles and the central locking button making the vehicle difficult to open.
The doors cannot be opened from inside Ÿ.
When the "Safe" security system is turned off:
xThe vehicle can be opened and unlocked from the inside using an inside
door handle.
xThe vehicle may be unlocked from the inside by pushing the central
locking button.
xThe anti-theft alarm will be activated.
xThe vehicle interior monitoring system and the anti-tow system are deac-
tivated.Driver's door indicator light.
WARNING
Careless use of the "Safe" security system can cause serious injury.
xNever leave anybody inside the vehicle if this is locked using the key.
When the "Safe" security system is activated, doors cannot be opened
from the inside.
xWhen the doors are locked, it is difficult to get to passengers in the
passenger compartment in case of an emergency. Passengers could remain
trapped inside in case of emergency.
Antitheft alarm
The anti-theft alarm makes it more difficult to break into the vehicle or steal it.
The antitheft alarm is automatically turned on when the vehicle is locked with
the key.
FunctionNecessary operations
Locks the vehicle with the "Safe"
security system.Press the button once on the vehicle
key.
Locks the vehicle without the
"Safe" security system.
Press the button twice on the vehicle
key.
Press the central locking button on
the driver's door once.
1
1
1
When the vehicle is locked:Meaning
The red LED flashes for approximately 2
seconds at short intervals and then more
slowly.The "Safe" security system is
switched on.
The red LED flashes for about two sec-
onds then turns off. After 30 seconds, the
LED flashes again.The "Safe" security system is
switched off.
The red LED remains lit for about 30 sec-
onds.There is a fault in the locking
system. Contact a specialist
workshop.

Unlocking and locking89
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a When does the system trigger an alarm?
The anti-theft alarm siren will be triggered for about 30 seconds accompa-
nied by optical warning signals for about five minutes when the vehicle is
locked and the following unauthorised actions are taken:
xWhen the door is mechanically unlocked using the vehicle key without
turning the ignition within the following 15 seconds.
xA door is opened.
xThe bonnet is opened.
xThe tailgate is opened.
xWhen the ignition is switched on with a non-authorised key.
xWhen the vehicle battery is disconnected.
xWhen there is movement inside the vehicle (vehicles with interior moni-
toring).
xWhen the vehicle is towed (vehicles with anti-tow system)
xWhen the vehicle is lifted (vehicles with anti-tow system).
xTransporting the vehicle on a ferry or by railroad (vehicles with an anti-tow
system or passenger compartment monitoring).
xUnhitch a trailer connected to the antitheft alarm Ÿpage 260.
How to turn OFF the alarm
Unlock the vehicle with the unlocking button on the key or turn on the ignition
with a valid key.
Note
The alarm will be triggered once more when anybody enters the same zone of
surveillance or any other zone. If, for example, after opening a door, the tail-
gate is also opened.
Note
The antitheft alarm is not activated when the vehicle is locked from within
using the central locking button .
Note
If the driver's door is unlocked mechanically with the key, only the driver's
door is unlocked, the rest of the doors remain locked. Only when the ignition
has been turned on will the other doors be available - but not unlocked - and
the central locking button activated.
Note
If the vehicle battery is run down or flat then the antitheft alarm will not
operate correctly.
1

Unlocking and locking 90
Interior monitoring system and anti-tow system*
The interior monitoring system triggers the alarm if the vehicle is locked and
movement is detected inside the vehicle. The anti-tow system triggers the alarm if the vehicle is locked when the system detects the vehicle is being
raised.
Switching on the interior monitoring and the anti-tow systems
Close the storage compartment Ÿfig. 52 on the roof console otherwise
the interior of monitoring function (arrow) may not work without restrictions.
Use the key to lock the vehicle. If the antitheft alarm is turned on, the interior
monitoring and the anti-tow systems are also activated.
Switching off the interior monitoring and the anti-tow systems
To turn off the system, the reading light on the button Ÿfig. 51 must be lit.
To turn on the reading light, remove the key from the ignition or open a door.
xPush the button. A yellow warning lamp will light up in the button
until the vehicle is locked.
xLock all doors and tailgate.
xUse the key to lock the vehicle. The interior monitor and / or anti-towing
alarm are switched off until the next time the vehicle is locked.
To turn off the interior monitoring and anti-tow systems before unlocking the
vehicle, for example in the following situations:
xWhen leaving animals inside the vehicle ’ Ÿpage 83.
xWhen the vehicle must be loaded.
xWhen the vehicle is being transported, for example, by ferry.
xWhen the vehicle must be towed with the axle raised.
Risk of false alarms
The interior monitoring system only operates correctly if the vehicle is
completely closed. Observe legal requirements. The alarm may be acciden-
tally triggered in the following cases:
xWhen a window is completely or partially open.
xIf the sunglasses storage compartment in the roof console is open.
xWhen the panorama sliding sunroof is completely or partially open.
Fig. 51 Driver's seat:
button for switching off
the interior monitoring
system and the anti-tow
system.
Fig. 52 On the roof
console: interior moni-
toring sensors.
A1
d OFF

Unlocking and locking 92
Doors
Introduction
Additional information and warnings:
xVehicle key set Ÿpage 78
xCentral locking and locking system Ÿpage 83
xEmergency locking and unlocking Ÿpage 348
WARNING
If a door is not correctly closed, it could open unexpectedly when driving
and cause serious injuries.
xAlways stop immediately and close the door.
xWhen closing, ensure that the door has closed correctly. A closed door
should be flush with the corresponding parts of the bodywork.
xOpen and close doors only when nobody is in the way of the door.
WARNING
A door held open by its retainer could be blown closed by the wind or close
if the vehicle is on a hill causing injury.
xWhen opening and closing doors, always use the door handle.
Warning indicator
Several warning and control lamps should light up for a few seconds when
the ignition is switched. This signals that the lamp is working properly. They
will switch off after a few seconds.
If a door is open or incorrectly closed, the indicator
 or o on the instrument
panel will light.
Depending on the vehicle equipment, a symbol may be displayed on the
instrument panel screen instead of the warning lamp. The indication is also
visible when the ignition is switched off. The indication disappears around 15
seconds after the vehicle has been locked.
Sliding doors
Introduction
Additional information:
xVehicle key set Ÿpage 78
xCentral locking and locking system Ÿpage 83
xEmergency locking and unlocking Ÿpage 348
lights upPossible causeSolution
oAt least one vehicle door is
open or not correctly shut.› Stop driving immediately!
Open the corresponding door
and close it immediately.

Unlocking and locking93
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
WARNING
If a sliding door is not correctly closed, it could open unexpectedly when
driving and cause serious injuries.
xAlways stop immediately and close the sliding door.
xWhen closing, ensure that the sliding door has closed correctly. A
closed sliding door should be flush with the corresponding parts of the
bodywork.
xOnly open and close sliding doors when no body is in the way of the
door.
WARNING
If a sliding door is not fully open, it could close unexpectedly and cause
serious injuries.
xAlways open the sliding door fully.
WARNING
Opening sliding doors while driving is dangerous. The sliding door could
be pushed open or closed when the vehicle accelerates and brakes causing
serious injuries.
xNever open the sliding doors when the vehicle is in movement.
Manually opening and closing the sliding door
FunctionNecessary operations
Open the sliding door from the
inside.When the sliding door is released, open
the door fully by pulling on the outside
handle.
Opening the sliding door from
the inside.When the sliding door is released, open
the door fully by pulling on its interior
handle Ÿfig. 53 .
Closing the sliding door.
Pull on the inside or outside door handle
and close the sliding door by pushing
gently. Make sure that the sliding door is
closed properly.
Fig. 53 On the sliding
door. door handle .A1
A1