key Seat Alhambra 2020 User Guide

Lights
7. Always take the vehicle key with you when you l eav
e the v ehicl
e
.
All turn signals flash simultaneously when the
hazard warning lights are switched on. The
two turn signal turn signal lamps   and the
turn signal lamp in the switch  will flash at
the same time. The simultaneous hazard
warning lights also work when the ignition is
switched off.
Emergency braking warning
If the vehicle brakes suddenly and continu-
ously at a speed of more than 80 km/h (50
mph), the brake light flashes several times per
second to warn the vehicles driving behind. If
you continue braking, the hazard warning
lights will come on automatically when the
vehicle comes to a standstill. They switch off
automatically when the vehicle starts to
move again. WARNING

Seats and headrests
Initialising the seat position memory
The position memory syst em must be r
estar
-
t
ed if, for example, the driver seat has been
changed.
Restarting deletes all memories and assign-
ments for the seat with position memory. The
memory buttons can then be reprogrammed
and the vehicle keys re-assigned.

Transport and practical equipment
pads stuck to the windows can concentrate
sunlight and damage the vehicle.
Glove compartment
Fig. 155
On the front passenger side: glove
compartment. Fig. 156
On the front passenger side: glove
compartment open. Opening and closing the glove compart-
ment
Unl
ock the gl o
ve compartment wher
e neces-
sary. The glove compartment is locked when
the key slot is vertical.
Opening: Pull the handle

Infotainment System
Function button: operation and effect
2 Press this button to change the keypad
language. Keypad l
anguages can be se-
l
ected from the menu system setup .
3 Displays the number and opens the list of
remaining selectable entries that mat

ch
the entered text.
Letters
and dig-
its Press them to copy them into the input
line.
Letters
with

Introduction
Function button: function
GPS : The time and date can be selected using
the Time zone function button. In this case, the
Time and
Date function buttons for manual
entry will not be active.
Manual : The time and date can be set manual-
ly using the Time and
Date function buttons.
Time : To set the time manually.
Time zone : To adjust the desired time zone.
Time format : To select the time display format (12
or 24 hours).
Date : To set the current date.
Date format : To select the date display format
(DD.MM.YYYY , YY-MM-DD or MM-DD-YY ).
Language : To select the desired language for texts
and phrases in the voice control syst em.
K
eyboard a)
: To select the type (alphabetical or k ey-
boar

d).
Additional keypad languages
a)
: To select additional
keyboard l anguages.
Units : To set the units of measurement of the vehi-
cle

Operating modes
Selecting stations
 /
 Depending on the setting of the ar-
row keys, you can s
wit
ch between
preset stations or tuneable sta-
tions. Setting the arrow buttons in
the menu

Infotainment System
Function button: function
Station List : The arrow keys are used to switch
between all of the tuneable st ations in the sel
ec-
ted frequency band.
Traffic programme (TP) : The TP function (tracking of
traffic information stations) is active

Operating modes
Function button: function
Seek mode : To set the settings for the arrow buttons 
and . The setting applies to all frequency bands
(FM, AM and DAB).
Preset list : The arrow keys are used to switch be-
tween all of the saved stations in the select ed
frequency band.
Station List : The arrow keys are used to switch
between all of the tuneable st ations in the sel

ec-
ted frequency band.
Traffic programme (TP) : The TP function (tracking of
traffic information stations) is activ e

Operating modes
Quick dial keys Fig. 230
PHONE main menu. The speed dial keys

Start and driving
Driving
St ar
t and driving
St ar
ting and st
opping the
engine
Ignition lock Fig. 233
Ignition key positions. Key positions