ignition Seat Cordoba 2005 User Guide

48Instrument panel
Alternator
The warning lamp comes on when the ignition is switched on and
must go out when the engine is started.
The alternator is driven by a long-life ribbed belt.
If the warning lamp lights during the journey, s st
to
op
p,
, ssw
wi
it
tc
ch
h oof
ff
f
e en
ng
gi
in
ne
e
and check ribbed belt.
If it isl lo
oo
os
se
e
or broken, d do
o nno
ot
t ddr
ri
iv
ve
e oon
n
– the coolant pump is no
longer being driven. The belt must be checked/ renewed.
If the warning lamp comes on even though the ribbed belt is not
broken or loose, you can generally wait to have this checked at the
next scheduled service.
As the battery will continue to discharge, all electrical consumers
which are not absolutely necessary should be switched off.
K
Parking light/dipped beam
Dipped beam, parking or side light pilot light (green). Works with
the ignition off.
K
Power steering*
The warning lamp will light up for a few seconds as a functional
check when the ignition is switched on.
The warning lamp comes on when the hydraulic oil level is not
sufficient or in case of a failure in the electrical system.
An acoustic signal warns the driver (1 bip).
Contact a Technical Service Centre.
I It
te
em
mS
Sy
ym
mb
bo
ol
lM
Me
ea
an
ni
in
ng
g oof
f wwa
ar
rn
ni
in
ng
g aan
nd
d cco
on
nt
tr
ro
ol
l lla
am
mp
ps
sF
Fu
ur
rt
th
he
er
ri
in
nf
fo
or
rm
ma
at
ti
io
on
n
5Indicators⇒page 49
6Coolant temperature/level*⇒page 49
7Main beam⇒page 50
8Fuel level*⇒page 50
9Anti-lock brake system (ABS)*⇒page 50
10Brakes/Hand brake
11Air Bag system1)⇒page 51
12Seat belt warning lamp*⇒page 51
13Engine diagnosis*⇒page 51
14Traction Control System (TCS)*/⇒page 51
14Electronic stabilisation program (ESP)*⇒page 52
15Electronic immobiliser*⇒page 52
16Engine oil pressure/level⇒page 52
17Trailer indicators*⇒page 53
1)This equipment will vary according to the country.
K

⇒page
50-51

49 Instrument panel
Safety FirstControls and equipment Tips and Maintenance Technical Data
N
No
ot
te
e
When towing the car with the engine shut down or in case of a breakdown
in the servo-steering mechanism, the power steering remains out of order.
Nonetheless, the vehicle continues to be steerable even though the effort to
handle the steering wheel is bigger.
K
Accelerator pedal faults (EPC)*
If there is a fault in the accelerator pedal working, a warning lamp
will go on. Have the fault repaired at a Technical Service Centre.
K
Glowplugs
(Diesel engines only)
When the engine isc co
ol
ld
d
the warning lamp comes on when key is
turned to Drive position (ignition on).
If the warning lamp does not come on, there is a defect in the glow
plug system – call in expert assistance.
When the lamp goes out, start the engine immediately
⇒"Starting
the engine" chapter.
When the engine isw wa
ar
rm
m
the glow plug lamp does not come on –
the engine can be started straight away.
N No
ot
te
e
If a fault occurs in the diesel engine management system, it will indicated
by a flashing warning lamp. In this case, have the engine checked
immediately by a Technical Service Centre.
K
Indicators
The pilot light flashes at the same time as the indicator. If a turn
signal fails, the warning lamp flashes twice as fast. (Not when
towing a trailer).
For more information
⇒"Flashers and high beam lever" chapter.K
Coolant temperature/level*
The warning lamp* lights up for a few seconds as a functional
check when ignition is switched on.
If the lamp does not go out afterwards or lights up or flashes when
driving, either the coolant temperature is too high or the coolant
level too low. An acoustic signal will sound 3 times as an
additional warning:
S St
to
op
p,
, ssw
wi
it
tc
ch
h een
ng
gi
in
ne
e oof
ff
f
and check level. Add coolant if necessary.
• • NNe
ev
ve
er
r oop
pe
en
n tth
he
e bbo
on
nn
ne
et
t oof
f yyo
ou
ur
r cca
ar
r iif
f yyo
ou
u sse
ee
e sst
te
ea
am
m oor
r cco
oo
ol
la
an
nt
t cco
om
mi
in
ng
g
f fr
ro
om
m tth
he
e een
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t –– RRi
is
sk
k oof
f ssc
ca
al
ld
di
in
ng
g!
! WWa
ai
it
t uun
nt
ti
il
l nno
o mmo
or
re
e sst
te
ea
am
m
o or
r cco
oo
ol
la
an
nt
t cca
an
n bbe
e sse
ee
en
n.
.
• • DDo
o nno
ot
t tto
ou
uc
ch
h tth
he
e ffa
an
n.
. TTh
he
e ffa
an
n cca
an
n ssw
wi
it
tc
ch
h oon
n ssu
ud
dd
de
en
nl
ly
y –– eev
ve
en
n wwh
he
en
n tth
he
e
e en
ng
gi
in
ne
e iis
s ssw
wi
it
tc
ch
he
ed
d oof
ff
f.
.
• • PPl
le
ea
as
se
e nno
ot
te
e tth
he
e ffo
ol
ll
lo
ow
wi
in
ng
g ppo
oi
in
nt
ts
s tto
o aav
vo
oi
id
d ssc
ca
al
ld
di
in
ng
g wwi
it
th
h hho
ot
t cco
oo
ol
la
an
nt
t:
:
– – EEx
xe
er
rc
ci
is
se
e cca
au
ut
ti
io
on
n wwh
he
en
n oop
pe
en
ni
in
ng
g tth
he
e cco
oo
ol
la
an
nt
t eex
xp
pa
an
ns
si
io
on
n tta
an
nk
k!
! WWh
he
en
n tth
he
e
W
WA
AR
RN
NI
IN
NG
G


50Instrument panel
Main beam
The warning lamp comes on when main beam is on or when the
headlight flasher is used.
K
Fuel level*
The warning lamp comes on when there are about 7 litres left in
the tank. The warning lamp will light up for a few seconds as a
functional check when the ignition is switched on.
K
Anti-lock brake system (ABS)*
A warning lamp system monitors the ABS.
The warning lamp should light up for a few seconds when the
ignition is switched on. It goes out again after the system has run
through an automatictest sequence.
There is a fault in the ABS if:
• The ABS warning lamp does not light up when the ignition is
switched on.
• The warning lamp does not go out again after a few seconds.
• The warning lamp lights up when the vehicle is moving.
The vehicle can still be braked in the normal way (except that the
ABS control function is out of action). Take the vehicle to the
Authorised Technical Service as soon as possible. For more
information
⇒pages 131 to 134.
If a fault occurs in the ABS, the ESP warning lamp will also light
up*.
Brakes
The warning lamp comes on when the brake fluid level is too low.
The ignition must be switched on.
In vehicles with the Anti-locking Brake System (ABS), the warning
lamp will light up for a few seconds after switching the ignition on
or starting the engine. If the ABS system fails, the brake system
warning lamp may light up together with the ABS warning lamp.
e en
ng
gi
in
ne
e iis
s hho
ot
t tth
he
e cco
oo
ol
li
in
ng
g ssy
ys
st
te
em
m iis
s uun
nd
de
er
r ppr
re
es
ss
su
ur
re
e –– DDa
an
ng
ge
er
r oof
f ssc
ca
al
ld
di
in
ng
g!
!
T Th
he
er
re
ef
fo
or
re
e lle
et
t een
ng
gi
in
ne
e cco
oo
ol
l ddo
ow
wn
n bbe
ef
fo
or
re
e uun
ns
sc
cr
re
ew
wi
in
ng
g tth
he
e cca
ap
p!
!
– – TTo
o ppr
ro
ot
te
ec
ct
t yyo
ou
ur
r ffa
ac
ce
e,
, hha
an
nd
ds
s aan
nd
d aar
rm
ms
s yyo
ou
u ssh
ho
ou
ul
ld
d cco
ov
ve
er
r tth
he
e cca
ap
p oof
f tth
he
e
r ra
ad
di
ia
at
to
or
r wwi
it
th
h aa lla
ar
rg
ge
e,
, tth
hi
ic
ck
k ccl
lo
ot
th
h tto
o ppr
ro
ot
te
ec
ct
t aag
ga
ai
in
ns
st
t sst
te
ea
am
m oor
r hho
ot
t ffl
lu
ui
id
d.
.
• • EEn
ns
su
ur
re
e tth
ha
at
t tth
he
e cco
oo
ol
la
an
nt
t lli
iq
qu
ui
id
d ddo
oe
es
s nno
ot
t ddr
ro
op
p oon
n tth
he
e hho
ot
t eex
xh
ha
au
us
st
t oor
r aan
ny
y
o ot
th
he
er
r hho
ot
t een
ng
gi
in
ne
e cco
om
mp
po
on
ne
en
nt
ts
s.
. TTh
he
e aan
nt
ti
if
fr
re
ee
ez
ze
e cco
on
nt
ta
ai
in
ne
ed
d iin
n tth
he
e cco
oo
ol
la
an
nt
t
c co
ou
ul
ld
d iig
gn
ni
it
te
e.
.
K
W WA
AR
RN
NI
IN
NG
G ((c
co
on
nt
ti
in
nu
ue
ed
d)
)
• • BBe
ef
fo
or
re
e oop
pe
en
ni
in
ng
g tth
he
e bbo
on
nn
ne
et
t,
, rre
ea
ad
d aan
nd
d oob
bs
se
er
rv
ve
e tth
he
e wwa
ar
rn
ni
in
ng
gs
s iin
n tth
he
e cch
ha
ap
pt
te
er
r
“ “E
En
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t”
”.
.
• • IIf
f tth
he
e bbr
ra
ak
ke
e wwa
ar
rn
ni
in
ng
g lla
am
mp
p lli
ig
gh
ht
ts
s uup
p tto
og
ge
et
th
he
er
r wwi
it
th
h tth
he
e AAB
BS
S wwa
ar
rn
ni
in
ng
g lla
am
mp
p,
,
s st
to
op
p tth
he
e vve
eh
hi
ic
cl
le
e iim
mm
me
ed
di
ia
at
te
el
ly
y aan
nd
d cch
he
ec
ck
k tth
he
e bbr
ra
ak
ke
e ffl
lu
ui
id
d lle
ev
ve
el
l
⇒“
“B
Br
ra
ak
ke
e
f fl
lu
ui
id
d.
.”
” IIf
f tth
he
e ffl
lu
ui
id
d lle
ev
ve
el
l hha
as
s ddr
ro
op
pp
pe
ed
d bbe
el
lo
ow
w tth
he
e ““M
MI
IN
N”
” mma
ar
rk
k yyo
ou
u mmu
us
st
t nno
ot
t
d dr
ri
iv
ve
e oon
n.
. RRi
is
sk
k oof
f aac
cc
ci
id
de
en
nt
t.
. OOb
bt
ta
ai
in
n tte
ec
ch
hn
ni
ic
ca
al
l aas
ss
si
is
st
ta
an
nc
ce
e.
.
K
W WA
AR
RN
NI
IN
NG
G


51 Instrument panel
Safety FirstControls and equipment Tips and Maintenance Technical Data
Hand brake
The pilot light will come on when the hand brake is set and the
ignition is switched on. It should go out when the hand brake is
taken off.
K
Air Bag system*
When the ignition is turned on, the warning light will remain lit for
a few seconds.
If the warning light flashes for about 12 seconds following
engagement of the ignition, this means that at least one Air Bag
has been disconnected in a Technical Service
⇒“Deactivation of
the Air Bag”.
T Th
he
er
re
ef
fo
or
re
e iif
f tth
he
e wwa
ar
rn
ni
in
ng
g lli
ig
gh
ht
t ddo
oe
es
s nno
ot
t ffl
la
as
sh
h oor
r iit
t lli
ig
gh
ht
ts
s oor
r ffl
la
as
sh
he
es
s
w wh
hi
il
le
e tth
he
e vve
eh
hi
ic
cl
le
e iis
s iin
n uus
se
e,
, iit
t mme
ea
an
ns
s tth
ha
at
t tth
he
er
re
e iis
s ppr
ro
ob
bl
le
em
m wwi
it
th
h tth
he
e
A Ai
ir
r BBa
ag
g.
. PPr
ro
oc
ce
ee
ed
d iim
mm
me
ed
di
ia
at
te
el
ly
y tto
o aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e tto
o sso
ol
lv
ve
e tth
he
e
p pr
ro
ob
bl
le
em
m.
.
K
Seat belt warning lamp*
The warning lamp lights up (only for certain countries) for about6
seconds after ignition as a reminder to fasten your safety belt.
If the seat belt is not fastened, in some countries an acoustic
signal will sound after switching on the ignition which will stop
after approximately 6 seconds or when the seat belt is fastened.
N No
ot
te
e
Please refer to chapter “Seat belts”. K
Engine diagnosis*
This pilot light comes on when the ignition is switched on as a test
and switches off after a few seconds.
In case of a failure in the engine’s electrical system, the warning
lamp will light up again. If this occurs, go to the nearest Technical
Service Centre.
K
Traction Control System (TCS)*
The traction control system prevents the drive wheels from
spinning when the car is accelerating.
The warning lamp lights up when the ignition is switched on and
should turn off after a few seconds.
When the TCS is operating while driving, the warning lamp flashes.
If the system is deactivated or if there is any fault in the same, the
warning lamp will remain lit.
T Th
he
e lle
ev
ve
el
l oof
f bbr
ra
ak
ke
e ffl
lu
ui
id
d iin
n tth
he
e rre
es
se
er
rv
vo
oi
ir
r iis
s tto
oo
o llo
ow
w iif
f tth
he
e wwa
ar
rn
ni
in
ng
g lla
am
mp
p ddo
oe
es
s
n no
ot
t ggo
o oof
ff
f oor
r iif
f iit
t lli
ig
gh
ht
ts
s uup
p wwh
hi
il
le
e ddr
ri
iv
vi
in
ng
g.
. PPr
ro
oc
ce
ee
ed
d iim
mm
me
ed
di
ia
at
te
el
ly
y tto
o tth
he
e nne
ea
ar
re
es
st
t
T Te
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e aan
nd
d hha
av
ve
e tth
he
e bbr
ra
ak
ke
e ssy
ys
st
te
em
m eex
xa
am
mi
in
ne
ed
d.
.
M Me
ea
an
nw
wh
hi
il
le
e yyo
ou
u wwi
il
ll
l hha
av
ve
e tto
o ppr
re
es
ss
s hha
ar
rd
de
er
r oon
n tth
he
e bbr
ra
ak
ke
e ppe
ed
da
al
l aan
nd
d bbr
ra
ak
ki
in
ng
g
d di
is
st
ta
an
nc
ce
es
s wwi
il
ll
l bbe
e ggr
re
ea
at
te
er
r.
.
I If
f tth
he
e bbr
ra
ak
ke
e ssy
ys
st
te
em
m wwa
ar
rn
ni
in
ng
g lla
am
mp
p lli
ig
gh
ht
ts
s uup
p tto
og
ge
et
th
he
er
r wwi
it
th
h tth
he
e AAB
BS
S wwa
ar
rn
ni
in
ng
g
l la
am
mp
p,
, tth
he
e rre
ea
ar
r wwh
he
ee
el
ls
s cco
ou
ul
ld
d llo
oc
ck
k ppr
re
em
ma
at
tu
ur
re
el
ly
y uup
po
on
n bbr
ra
ak
ki
in
ng
g.
. PPr
ro
oc
ce
ee
ed
d
i im
mm
me
ed
di
ia
at
te
el
ly
y tto
o aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e wwh
hi
il
le
e eex
xe
er
rc
ci
is
si
in
ng
g eex
xt
tr
re
em
me
e
c ca
au
ut
ti
io
on
n.
.
K
W WA
AR
RN
NI
IN
NG
G


52Instrument panel
It will also come on if a fault should occur in the ABS because the
TCS operates in conjunction with the ABS. For more information
⇒“Brakes”.K
Electronic stabilisation program (ESP)*
This program includes the ABS, EDL and TCS.
The warning light provides information on the electronic
stabilisation programme and has the following functions:
• It lights up when the ignition is switched on and should go out
again after a few seconds.
• It flashes when the ESP is activated when driving.
• It will light up continuously if there is a malfunction in the ESP.
• It will light up continuously if the ESP is switched off.
• It will also come on if a fault should occur in the ABS because the
ESP operates in conjunction with the ABS.
If the ESP warning lamp lights up and stays on immediately after
the engine is started, this may mean that the control system has
temporarily switched off the ESP. In this case the ESP can be
reactivated by switching the ignition off and then on again. If the
warning lamp goes out, this means the system is fully functional.
E El
le
ec
ct
tr
ro
on
ni
ic
c ddi
if
ff
fe
er
re
en
nt
ti
ia
al
l llo
oc
ck
k ((E
ED
DL
L)
) ffa
au
ul
lt
t
EDL operates along with the ABS in vehicles equipped with an Electronic
Stabilisation Program (ESP*).
A malfunction in the EDL is indicated by the ABS warning lamp. Take the
vehicle to the Technical Service as soon as possible. For more information
on the EDL
⇒page 133.K
Electronic immobiliser*
When switching the ignition on, the data from the vehicle key is
automatically processed. This procedure is confirmed by the
warning lamp lighting up briefly.
If a non-authorised key is used, the warning lamp will flash
permanently. The ignition will not work
⇒"Keys with remote
control" chapter.
K
Engine oil pressure/level*
The warning lamp lights up for a few seconds as a functional check
when ignition is switched on.
If the warning lamp is red or yellow or flashes it indicates that the
engine oil pressure or level is too low. This warning lamp will also
light up if there is a defect in the oil level indicator.
I If
f lli
ig
gh
ht
ts
s uup
p oor
r ffl
la
as
sh
he
es
s rre
ed
d ((i
in
ns
su
uf
ff
fi
ic
ci
ie
en
nt
t ooi
il
l ppr
re
es
ss
su
ur
re
e)
)
If the warning lamp lights up or flashes red while driving an acousticsignal
will sound three times at engine speeds above 1500 rpm. Stop and switch
engine off: check oil level and add oil, if necessary
⇒"Engine oil" chapter.
I If
f tth
he
e wwa
ar
rn
ni
in
ng
g lla
am
mp
p ffl
la
as
sh
he
es
s eev
ve
en
n tth
ho
ou
ug
gh
h tth
he
e ooi
il
l lle
ev
ve
el
l iis
s iin
n oor
rd
de
er
r,
, ddo
o nno
ot
t
c co
on
nt
ti
in
nu
ue
e ddr
ri
iv
vi
in
ng
g.
. DDo
o nno
ot
t eev
ve
en
n rru
un
n tth
he
e een
ng
gi
in
ne
e aat
t iid
dl
li
in
ng
g ssp
pe
ee
ed
d.
. CCa
al
ll
l iin
n eex
xp
pe
er
rt
t
a as
ss
si
is
st
ta
an
nc
ce
e.
.
If while driving the engine speed decreases below idling speed the oil
pressure warning lamp may light up. Increase engine speed by accelerating
or changing down gear.


57 Opening and closing
Safety FirstControls and equipment Tips and Maintenance Technical Data
Keys with remote control*The vehicles with remote control* are supplied with two keys. A
conventional key
⇒page 56 and a key with remote control⇒
"Radio-frequency remote control key" chapter.
N No
ot
te
e
In some model versions and in some countries the key with a remote control
function can be folded. Its functioning, as far as the remote control, is
identical to the keys with remote control
⇒"Radio-frequency remote control
key" chapter.
F Fo
ol
ld
da
ab
bl
le
e kke
ey
y*
*
T
To
o uun
nf
fo
ol
ld
d
the key sword, press button A. It will unfold with a spring.
T To
o ffo
ol
ld
d
the key sword, press button
Aand guide it with your hand until it is
completely folded.K
Electronic immobiliser
The immobiliser prevents unauthorised persons from using your
vehicle.
A micro-chip is located in the head of the key which automatically
deactivates the immobiliser when the key is inserted in the ignition
lock.
The system is automatically activated when the ignition is switched
off.
N No
ot
te
e
The engine can thus only be started with a correctly coded Genuine SEAT
key.
Trouble free operation of your vehicle can only be guaranteed when using
genuine keys.
K
Fig. 44
Fig. 45
LEO-005
A
LEO-006

58Opening and closing
D
Do
oo
or
rs
s
Locking and unlocking the vehicle
F
Fr
ro
om
m tth
he
e oou
ut
ts
si
id
de
e oof
f tth
he
e vve
eh
hi
ic
cl
le
e
, it may be locked or unlocked
using the driver door key.
U Up
po
on
n oop
pe
en
ni
in
ng
g
, the latch will rise up (for vehicles with central locking).
For vehicles equipped with electric windows and central locking, if
the key is maintained in the opening position all of the electric side
windows will open.
U Up
po
on
n ccl
lo
os
si
in
ng
g
, the latch will descend (for vehicles with central
locking).
In some vehicle models equipped with electric windows and
central locking, if the key is maintained in the locking position on
the driver side, any side windows left open as well as the electric
sunroof will close.
For vehicles without central locking, the passenger door and the
rear doors may be locked from the outside without using a key. Just
press the button down and close the door.
The latch on the driver’s door may not be pushed down while the
door is open (only in vehicles without central locking). This avoids
accidentally leaving the keys in the ignition.F Fr
ro
om
m tth
he
e iin
ns
si
id
de
e oof
f tth
he
e vve
eh
hi
ic
cl
le
e
, all the doors may be locked by
pushing the security buttons down (in vehicles without central
locking).
C Ce
en
nt
tr
ra
al
l llo
oc
ck
ki
in
ng
g*
*
Description of the central locking system
When the key is used in the driver’s door, all doors and the boot
are unlocked at the same time by the central locking system.
The central locking system is fitted with a l lo
oc
ck
ki
in
ng
g sse
ec
cu
ur
ri
it
ty
y ssy
ys
st
te
em
m
(double lock): When the vehicle is locked with the key or the
remote control from the outside, all of the doors are locked
impeding any attempt to force them.
This system may be activated from the o ou
ut
ts
si
id
de
e
either by using the
key or the radio-frequency remote control*.
L Lo
oc
ck
ki
in
ng
g llo
oc
ca
at
ti
io
on
ns
s oof
f tth
he
e vve
eh
hi
ic
cl
le
e
O
Ou
ut
ts
si
id
de
e:
:
Driver’s door or by using the radio-frequency remote control*.
I In
ns
si
id
de
e:
:
By using the central locking switch located on the handle of the driver’s
door
⇒page 59.K
• • EEx
xe
er
rc
ci
is
se
e eex
xt
tr
re
em
me
e cca
au
ut
ti
io
on
n wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s aan
nd
d tth
he
e ssu
un
nr
ro
oo
of
f ffr
ro
om
m
t th
he
e oou
ut
ts
si
id
de
e oof
f tth
he
e vve
eh
hi
ic
cl
le
e.
.
• • CCl
lo
os
si
in
ng
g ffr
ro
om
m tth
he
e oou
ut
ts
si
id
de
e wwi
it
th
ho
ou
ut
t tta
ak
ki
in
ng
g cca
ar
re
e oor
r oob
bs
se
er
rv
vi
in
ng
g aal
ll
l tth
he
e vve
eh
hi
ic
cl
le
e
m ma
ay
y cca
au
us
se
e bbr
ru
ui
is
si
in
ng
g ffo
or
r oot
th
he
er
r ppe
eo
op
pl
le
e ees
sp
pe
ec
ci
ia
al
ll
ly
y cch
hi
il
ld
dr
re
en
n.
.
• • WWh
he
en
n llo
oc
ck
ki
in
ng
g aa vve
eh
hi
ic
cl
le
e,
, nne
ev
ve
er
r lle
ea
av
ve
e cch
hi
il
ld
dr
re
en
n uun
na
ac
cc
co
om
mp
pa
an
ni
ie
ed
d iin
ns
si
id
de
e,
, aas
s iit
t
w wi
il
ll
l mma
ak
ke
e iit
t mmo
or
re
e ddi
if
ff
fi
ic
cu
ul
lt
t tto
o ppr
ro
ov
vi
id
de
e aas
ss
si
is
st
ta
an
nc
ce
e iif
f rre
eq
qu
ui
ir
re
ed
d.
.
W
WA
AR
RN
NI
IN
NG
G
W Wh
he
en
n tth
he
e ddo
oo
or
rs
s aar
re
e llo
oc
ck
ke
ed
d,
, aan
ny
y iin
nt
tr
ru
us
si
io
on
n iis
s iim
mp
pe
ed
de
ed
d,
, ffo
or
r eex
xa
am
mp
pl
le
e wwh
hi
il
le
e
s st
to
op
pp
pe
ed
d aat
t aa rre
ed
d lli
ig
gh
ht
t.
.
K
W WA
AR
RN
NI
IN
NG
G

59 Opening and closing
Safety FirstControls and equipment Tips and Maintenance Technical Data
Opening
To o op
pe
en
n
your vehicle turn the key in the lock of the driver’s door to
the opening position or use the radio-frequency remote control. All
of the doors will be unlocked
When the vehicle is opened using the radio-frequency remote
control, the locking security system as well as the anti theft alarm*
are immediately deactivated. The indicator on the driver’s door will
stop flashing. This warning light is fitted to vehicles equipped with
the locking security system or the anti theft alarm*.
When the vehicle is opened using the key, the locking security
system (double locking) is immediately deactivated. The anti theft
alarm will only be deactivated when the key is put in the ignition;
15 seconds are given to do this.
When the vehicle is opened, the interior lighting will come on for
30 seconds as if a door is open and the indicators will flash twice.
If, for any reason, the central locking ceases to function then, in
general, the drivers door and boot may be opened conventionally
using the key but neither the locking security system nor the anti
theft alarm can be activated.
If the key is maintained
1)in the opening position in the driver’s
door the electric windows will open, in vehicles equipped with
them.N No
ot
te
e
If for any reason the central locking ceases to function, neither the rear
doors nor the passenger door may be opened.
The lock mechanism of the driver’s door, the boot and the ignition locking
mechanism all possess a
r ro
ot
ta
at
ti
io
on
n mme
ec
ch
ha
an
ni
is
sm
m (which will turn freely
without the key)*. When the locking mechanism is operated with any object
other than the key, the rotation mechanism is activated. The manipulated
cylinder will rotate without opening the vehicle or turning the ignition on.
If the rotation mechanism is activated when the key is inserted then remove
the key fully and then reinsert it to open the vehicle. There will be no
damage to the locks.
K
Locking
•To l lo
oc
ck
k
your vehicle, t tu
ur
rn
n tth
he
e kke
ey
y oon
nc
ce
e
(the double lock is
activated) to the locking position in the driver’s door lock. All of the
doors and the boot will lock. The locking security system (double
lock) and the anti theft alarm* will be immediately activated and
the indicator light on the driver’s door will begin to flash to
indicate this. This warning light is fitted to vehicles equipped with
the locking security system or the anti theft alarm*.
When the vehicle is locked, all of the interior lights that may be on
are turned off and the indicator lights flash once.
T Th
he
e aac
ct
ti
iv
va
at
ti
io
on
n oof
f tth
he
e llo
oc
ck
ki
in
ng
g sse
ec
cu
ur
ri
it
ty
y ssy
ys
st
te
em
m ((d
do
ou
ub
bl
le
e llo
oc
ck
k)
) iis
s
i in
nd
di
ic
ca
at
te
ed
d bby
y tth
he
e ffl
la
as
sh
hi
in
ng
g oof
f tth
he
e iin
nd
di
ic
ca
at
to
or
r lli
ig
gh
ht
t llo
oc
ca
at
te
ed
d oon
n tth
he
e tto
op
p
o of
f tth
he
e ddr
ri
iv
ve
er
r’
’s
s ddo
oo
or
r ppa
an
ne
el
l aat
t tth
he
e lle
ev
ve
el
l oof
f tth
he
e wwi
in
nd
do
ow
w.
. AAl
ls
so
o,
, ffo
or
r
v ve
eh
hi
ic
cl
le
es
s eeq
qu
ui
ip
pp
pe
ed
d wwi
it
th
h tth
he
e aan
nt
ti
i tth
he
ef
ft
t aal
la
ar
rm
m*
*,
, tth
he
e iin
nd
di
ic
ca
at
to
or
r lli
ig
gh
ht
t wwi
il
ll
l
i in
nd
di
ic
ca
at
te
e wwh
he
en
n tth
he
e aal
la
ar
rm
m iis
s oon
n.
.
1)This function may vary according to the model and country.


61 Opening and closing
Safety FirstControls and equipment Tips and Maintenance Technical Data
L
Lo
oc
ck
ki
in
ng
g
By pressing the inferior hand side of the switch
Aall doors and the
boot lid/tailgate are locked. It is now no longer possible to open
the doors or boot lid/tailgate. Unwanted access from outside (e.g.
at trafficlights) is also prevented in this way
⇒fig. 46.
If the driver’s door iso op
pe
en
n
it will not be locked. This is to prevent
you from locking yourself out.
The locking security system (double lock) and the anti theft alarm*
are
n no
ot
tactivated if the push button is used.
A Au
ut
to
om
ma
at
ti
ic
c LLo
oc
ck
ki
in
ng
g*
*
The doors will lock automatically when the vehicle exceeds speeds
of 15 km/h.
N No
ot
te
e
If the vehicle is locked with the central locking button or the automatic
locking function, it is possible to unlock the doors individually. You will have
to pull the door release lever twice.
U Un
nl
lo
oc
ck
ki
in
ng
g
When the upper part
Bof the central locking switch is pressed, all
of the doors unlock, including when the automatic locking function
is activated (speeds over 15 km/h)
⇒fig. 46.
A Au
ut
to
om
ma
at
ti
ic
c UUn
nl
lo
oc
ck
ki
in
ng
g*
*
The doors of the vehicle will be opened automatically when the key
is removed from the ignition depending on how the vehicle was
previously opened (selective unlocking).
The button will also function when the ignition is switched off.N No
ot
te
e
Some functional aspects of the vehicle can be programmed according to
the client’s driving style. For further information, consult the Technical
Service.
K
•I If
f tth
he
e cce
en
nt
tr
ra
al
l llo
oc
ck
ki
in
ng
g bbu
ut
tt
to
on
n iin
n tth
he
e ddo
oo
or
r rre
el
le
ea
as
se
e lle
ev
ve
er
r oon
n tth
he
e ddr
ri
iv
ve
er
r’
’s
s ddo
oo
or
r
i is
s oop
pe
er
ra
at
te
ed
d,
, aal
ll
l oot
th
he
er
r ddo
oo
or
rs
s aan
nd
d tth
he
e tta
ai
il
lg
ga
at
te
e aar
re
e llo
oc
ck
ke
ed
d aau
ut
to
om
ma
at
ti
ic
ca
al
ll
ly
y.
.
H Ho
ow
we
ev
ve
er
r wwh
he
en
n tth
he
e ddo
oo
or
rs
s aar
re
e llo
oc
ck
ke
ed
d oou
ut
ts
si
id
de
e hhe
el
lp
p iin
n aan
n eem
me
er
rg
ge
en
nc
cy
y iis
s
h hi
in
nd
de
er
re
ed
d,
, aan
nd
d sso
o cch
hi
il
ld
dr
re
en
n ssh
ho
ou
ul
ld
d nne
ev
ve
er
r bbe
e lle
ef
ft
t aal
lo
on
ne
e iin
n tth
he
e vve
eh
hi
ic
cl
le
e.
.
•L
Lo
oc
ck
ki
in
ng
g tth
he
e ddo
oo
or
rs
s aan
nd
d tta
ai
il
lg
ga
at
te
e ppr
re
ev
ve
en
nt
ts
s iin
nt
tr
ru
ud
de
er
rs
s ffr
ro
om
m gge
et
tt
ti
in
ng
g iin
n tth
he
e
v ve
eh
hi
ic
cl
le
e,
, ee.
.g
g.
. aat
t ttr
ra
af
ff
fi
ic
c lli
ig
gh
ht
ts
s.
.
•F
Fo
or
r vve
eh
hi
ic
cl
le
es
s eeq
qu
ui
ip
pp
pe
ed
d wwi
it
th
h AAi
ir
r BBa
ag
gs
s aan
nd
d oon
nl
ly
y iin
n tth
he
e eev
ve
en
nt
t oof
f aa cco
ol
ll
li
is
si
io
on
n
w wh
he
er
re
e aan
n AAi
ir
r BBa
ag
g iis
s dde
et
to
on
na
at
te
ed
d,
, tth
he
e cce
en
nt
tr
ra
al
l llo
oc
ck
ki
in
ng
g wwi
il
ll
l uun
nl
lo
oc
ck
k aal
ll
l ddo
oo
or
rs
s
a au
ut
to
om
ma
at
ti
ic
ca
al
ll
ly
y tto
o ffa
ac
ci
il
li
it
ta
at
te
e tth
he
e eev
va
ac
cu
ua
at
ti
io
on
n oof
f tth
he
e vve
eh
hi
ic
cl
le
e.
. TTh
he
e vve
eh
hi
ic
cl
le
e’
’s
s
i in
nt
te
er
ri
io
or
r lli
ig
gh
ht
t aan
nd
d tth
he
e wwa
ar
rn
ni
in
ng
g lli
ig
gh
ht
ts
s wwi
il
ll
l rre
em
ma
ai
in
n lli
it
t uun
nt
ti
il
l tth
he
e kke
ey
y iis
s rre
em
mo
ov
ve
ed
d
f fr
ro
om
m tth
he
e iig
gn
ni
it
ti
io
on
n aan
nd
d rre
ei
in
ns
se
er
rt
te
ed
d aag
ga
ai
in
n.
.
•O
On
nc
ce
e tth
he
e vve
eh
hi
ic
cl
le
e hha
as
s bbe
ee
en
n llo
oc
ck
ke
ed
d wwi
it
th
h tth
he
e rra
ad
di
io
o wwa
av
ve
e rre
em
mo
ot
te
e cco
on
nt
tr
ro
ol
l oor
r
w wi
it
th
h aa rre
eg
gu
ul
la
ar
r kke
ey
y tth
he
e cce
en
nt
tr
ra
al
l llo
oc
ck
ki
in
ng
g kkn
no
ob
b bbe
ec
co
om
me
es
s iin
na
ac
ct
ti
iv
ve
e.
. IIt
t nno
o llo
on
ng
ge
er
r
w wo
or
rk
ks
s.
. FFo
or
r tth
hi
is
s rre
ea
as
so
on
n,
, ddo
o nno
ot
t lle
ea
av
ve
e aan
ny
yo
on
ne
e iin
n tth
he
e vve
eh
hi
ic
cl
le
e,
, iin
n ppa
ar
rt
ti
ic
cu
ul
la
ar
r
c ch
hi
il
ld
dr
re
en
n,
, ssi
in
nc
ce
e iit
t iis
s nno
ot
t ppo
os
ss
si
ib
bl
le
e tto
o oop
pe
en
n ffr
ro
om
m tth
he
e iin
ns
si
id
de
e oor
r ffr
ro
om
m tth
he
e
o ou
ut
ts
si
id
de
e.
. FFu
ur
rt
th
he
er
rm
mo
or
re
e,
, tth
he
e vve
eh
hi
ic
cl
le
e cca
an
nn
no
ot
t bbe
e uun
nl
lo
oc
ck
ke
ed
d bby
y sst
ti
ic
ck
ki
in
ng
g tth
he
e hha
an
nd
d
i in
n tth
he
e wwi
in
nd
do
ow
w aan
nd
d ppu
ul
ll
li
in
ng
g tth
he
e kkn
no
ob
b ffr
ro
om
m tth
he
e iin
ns
si
id
de
e oor
r tth
he
e cce
en
nt
tr
ra
al
l llo
oc
ck
k
c co
om
mm
ma
an
nd
d.
. TTh
he
er
re
ef
fo
or
re
e,
, nno
o iin
nt
tr
ru
ud
de
er
r cca
an
n uun
nl
lo
oc
ck
k tth
he
e vve
eh
hi
ic
cl
le
e.
.
•T
Ta
ak
ke
e ggr
re
ea
at
t cca
ar
re
e wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s aan
nd
d tth
he
e eel
le
ec
ct
tr
ri
ic
c rro
oo
of
f*
* ffr
ro
om
m tth
he
e
o ou
ut
ts
si
id
de
e!
!
•I
If
f yyo
ou
u ccl
lo
os
se
e ffr
ro
om
m tth
he
e oou
ut
ts
si
id
de
e cca
ar
re
el
le
es
ss
sl
ly
y oor
r wwi
it
th
ho
ou
ut
t vvi
is
si
ib
bi
il
li
it
ty
y yyo
ou
u mma
ay
y
c ca
au
us
se
e sse
er
ri
io
ou
us
s iin
nj
ju
ur
ry
y ees
sp
pe
ec
ci
ia
al
ll
ly
y tto
o cch
hi
il
ld
dr
re
en
n.
.
W
WA
AR
RN
NI
IN
NG
G

64Opening and closing
N
No
ot
te
e
When you lock the car the indicator pilot lights will only come on ifthe
alarm has been properly activated (all security areas have been properly
locked).
If a door or the boot are left open when the alarm is connected, they will not
be incorporated into the car’s protection system. If after you lock the doors
or boot, they will be automatically incorporated into the securityareas and
the indicator signals will show.
The alarm will be triggered if, with the vehicle locked, one of
•the doors,
•the bonnet, or
•the boot
is opened or
•the ignition is switched on.
When the alarm is triggered the horn sounds and a flashing signal
is activated for about 30 seconds.
T To
o dde
ea
ac
ct
ti
iv
va
at
te
e tth
he
e aan
nt
ti
i tth
he
ef
ft
t aal
la
ar
rm
m,
, tth
he
e kke
ey
y mmu
us
st
t bbe
e ttu
ur
rn
ne
ed
d tto
o tth
he
e
o op
pe
en
n ppo
os
si
it
ti
io
on
n iin
n tth
he
e ddr
ri
iv
ve
er
r’
’s
s ddo
oo
or
r aan
nd
d tth
he
e iig
gn
ni
it
ti
io
on
n mmu
us
st
t bbe
e ttu
ur
rn
ne
ed
d
o on
n wwi
it
th
hi
in
n 115
5 sse
ec
co
on
nd
ds
s,
, oor
r tth
he
e ““o
op
pe
en
n”
” bbu
ut
tt
to
on
n oon
n tth
he
e rre
em
mo
ot
te
e cco
on
nt
tr
ro
ol
l
m ma
ay
y aal
ls
so
o bbe
e uus
se
ed
d.
.
– –t
tw
wo
o ffl
li
ic
ck
ke
er
rs
s:
: oop
pe
en
n aan
nd
d dde
ea
ac
ct
ti
iv
va
at
te
e tth
he
e aal
la
ar
rm
m
– –o
on
ne
e ffl
li
ic
ck
ke
er
r:
: llo
oc
ck
k aan
nd
d aac
ct
ti
iv
va
at
te
e aal
la
ar
rm
m
N No
ot
te
e
• The warning lamp goes out after approx. 28 days. This prevents the
battery becoming discharged when the vehicle is not used for a long period.
The alarm system remains activated.
• The alarm signal will be triggered a second time if one of the protectedparts of the car is interfered with again after the alarm signal has stopped
(for instance if the tailgate is opened after one of the doors has been
opened).
• The alarm can also be activated and deactivated via the radio wave
remote control*. Further information can be found under the heading
“Radio-frequency remote control key”.
• In vehicles fitted with an additional alarm system*, if the vehicle is
accessed with the key on the driver’s door, you have 15 seconds to insert
the key in the ignition lock and switch on ignition. If not the alarm is set off
for 30 seconds and it will be impossible to start engine.
The alarm can only be disconnected by pressing the "open" key on the
remote control.
In vehicles without a remote control key you will have to wait for 30 seconds
until the alarm stops. Lock the door and repeat the previously described
process.
If the vehicle is accessed through any door other than the driver’s door or
the tailgate the alarm will be set off for 30 seconds.
K
Volumetric sensor*
This is a surveillance function or a control incorporated in the anti-
theft alarm system which detects through ultrasound unauthorized
access to the vehicle interior (i.e. through a window).
The system has 3 sensors, 2 transmitters and one receiver.
A Ac
ct
ti
iv
va
at
te
e
The volumetricsensor is switched on automatically when the anti-
theft alarm is activated whether by locking manually with the key
or by remote control.