ignition Seat Cordoba 2005 Owner's Guide

78Lights and visibility
• Left turn signals – lever down2
When turn signals are working, the warning lamp flashes as well⇒
"Warning lamps" chapter.
The turn signals switch off automatically when the steering wheel
returns to its normal position.
T To
o ssi
ig
gn
na
al
l aa lla
an
ne
e cch
ha
an
ng
ge
e
For rapid manoeuvres such as lane changes, lift
1or press down2the lever only to the point of pressure and hold it in position.
If the lever is used with a slight pulsation the indicator will blink
three times.
H He
ea
ad
dl
li
ig
gh
ht
t ffl
la
as
sh
he
er
r
Pull the lever towards the steering wheel
3– the main beam
warning lamp will light up.
H Hi
ig
gh
h bbe
ea
am
m lli
ig
gh
ht
t
To engage the high beam lights, push the lever forward with the
low beam lights connected
4. The corresponding warning lamp
will light up when the high beam light is on.
P Pa
ar
rk
ki
in
ng
g lli
ig
gh
ht
ts
s*
*
The parking lights only work when ignition is switched off.
Right parking lights – lever up
1
Left parking lights – lever down2
If the ignition key has been removed, a buzzer* will sound when
the driver’s door is open.N No
ot
te
e
The use of the signals and lighting described here is subject to local
regulations.K
I In
nt
te
er
ri
io
or
r lli
ig
gh
ht
ts
s
Front interior light
Switch positionsA:
0–Off
Right – Door contact switch
Left – Light on continuously
B45-144CFig. 62


79 Lights and visibility
Safety FirstControls and equipment Tips and Maintenance Technical Data
Interior lights with delayed switch off* remain on for about 30
seconds after doors are closed.
K
Front reading light*
The reading light is turned on or off by pressing the appropriate
switch B.K
Glove compartment light*
The passenger’s glove compartment light only lights up when the
lights are switched on and the glove compartment lid is open.
K
Switch on interior light
The interior light is switched on for approx. 30 seconds when the
vehicle is unlocked, a door is opened or the ignition key is
removed. Hence, the interior light switch must be in the door
contact position.
It is switched off immediately as soon as the vehicle is locked or
the ignition switched on.
With the door open, the interior light will remain switched on for a
maximum of ten minutes. This avoids unnecessary battery
discharge.
N No
ot
te
e
In vehiclesw wi
it
th
ho
ou
ut
t cce
en
nt
tr
ra
al
li
is
se
ed
d llo
oc
ck
ki
in
ng
g,
,
the interior light can o on
nl
ly
y
be
switched on by opening the driver's door or by manually pressing the
switch.
K
B45-144CFig. 63

80Lights and visibility
W
Wi
in
nd
ds
sc
cr
re
ee
en
n wwa
as
sh
he
er
rs
s
Front windscreen wipers
Wipers and washers only work when ignition is switched on.
W Wh
he
en
n iit
t iis
s ffr
re
ee
ez
zi
in
ng
g,
, cch
he
ec
ck
k tth
ha
at
t tth
he
e wwi
ip
pe
er
r bbl
la
ad
de
es
s aar
re
e nno
ot
t ffr
ro
oz
ze
en
n tto
o
t th
he
e ggl
la
as
ss
s bbe
ef
fo
or
re
e ssw
wi
it
tc
ch
hi
in
ng
g tth
he
e wwi
ip
pe
er
rs
s oon
n ffo
or
r tth
he
e ffi
ir
rs
st
t tti
im
me
e.
.The heated windscreen washer jets* are switched on when the
ignition is switched on and the amount of heat is regulated
automatically according to the outside temperature.
N No
ot
te
e
•Fill container ⇒"Windscreen washer" chapter.
•Replace wiper blades⇒"Wiper blades" chapter.
W
Wi
in
nd
ds
sc
cr
re
ee
en
n
• • WWi
in
nd
ds
sc
cr
re
ee
en
n wwi
ip
pe
er
rs
s oof
ff
f
Lever at position
0.
• • IIn
nt
te
er
rm
mi
it
tt
te
en
nt
t wwi
ip
pe
e
Lever at position
1.
Use lever
Ato change the intervals of the intermittent wipe. Four
levels are available.
Lever to the right – brief intervals
Lever to the left – long intervals
The intervals of each level are determined by the speed of the
vehicle.
• • WWi
ip
pe
er
r ssl
lo
ow
w
Lever at position
2.
• • WWi
ip
pe
er
r ffa
as
st
t
Lever at position
3.
• • FFl
li
ic
ck
k wwi
ip
pe
e
Lever at position
4.
T Th
he
e wwi
in
nd
ds
sc
cr
re
ee
en
n wwi
ip
pe
er
rs
s mmu
us
st
t bbe
e iin
n vve
er
ry
y ggo
oo
od
d cco
on
nd
di
it
ti
io
on
n tto
o een
ns
su
ur
re
e ccl
le
ea
ar
r
v vi
is
si
ib
bi
il
li
it
ty
y ⇒"
"W
Wi
ip
pe
er
r bbl
la
ad
de
es
s"
" cch
ha
ap
pt
te
er
r.
.
W
WA
AR
RN
NI
IN
NG
G
km/h
40
20
0 6080
100
140
180
220
26010 30507090
120
160
200240
2
0
A
0
1
2
3
4
5
B6L-0007Fig. 64


81 Lights and visibility
Safety FirstControls and equipment Tips and Maintenance Technical Data
•
• AAu
ut
to
om
ma
at
ti
ic
c wwa
as
sh
h/
/w
wi
ip
pe
e ffa
ac
ci
il
li
it
ty
y
To turn on wipers and washer, pull lever towards steering wheel to
position
5.
When the lever is released, no more water is sprayed, but the
wipers continue to work for around 4 seconds.
The windscreen will be wiped again after approximately five
seconds once the wipe/wash system has been operated.
K
Rain sensor*
If the vehicle is fitted with a rain sensor and the intermittent wipe
is activated this sensor is in charge of adjusting automatically the
duration of the intervals to the amount of rain.
Position
Aof the lever for the windscreen wipers is used to
individually adjust the sensitivity of the rain sensor
⇒ fig. 64.
After switching off the ignition, the rain sensor needs to be
switched on again. To do that the intermittent wipe needs to be
switched off and switched on again.
K
Headlight washer system*
When the main or dipped beam is on, the lenses are washed every
time the windscreen is washed.
At regular intervals, such as when filling the tank, the dirt on the
lenses (insects) should be removed.
N No
ot
te
e
• Do not use sharp objects or abrasive solvents when cleaning lampsas
these could cause damage.
• To save water, if the windscreen washer is activated repeatedly, the
headlight washers will be activated every three cycles.
K
W Wi
ip
pe
er
r bbl
la
ad
de
es
s
Observations

•T Th
he
e wwi
ip
pe
er
r bbl
la
ad
de
es
s mmu
us
st
t bbe
e iin
n ggo
oo
od
d cco
on
nd
di
it
ti
io
on
n ffo
or
r ccl
le
ea
ar
r vvi
is
si
ib
bi
il
li
it
ty
y.
.
•I
In
n oor
rd
de
er
r tto
o ppr
re
ev
ve
en
nt
t sst
tr
re
ea
ak
ks
s oon
n tth
he
e wwi
in
nd
ds
sc
cr
re
ee
en
n yyo
ou
u ssh
ho
ou
ul
ld
d ccl
le
ea
an
n tth
he
e wwi
ip
pe
er
r
b bl
la
ad
de
es
s rre
eg
gu
ul
la
ar
rl
ly
y wwi
it
th
h aa wwi
in
nd
do
ow
w ccl
le
ea
an
ni
in
ng
g ppr
ro
od
du
uc
ct
t.
. IIf
f tth
he
e wwi
in
nd
do
ow
ws
s aar
re
e
p pa
ar
rt
ti
ic
cu
ul
la
ar
rl
ly
y ddi
ir
rt
ty
y,
, ee.
.g
g.
. iin
ns
se
ec
ct
t rre
em
ma
ai
in
ns
s,
, aa ssp
po
on
ng
ge
e oor
r ccl
lo
ot
th
h ssh
ho
ou
ul
ld
d bbe
e uus
se
ed
d tto
o
c cl
le
ea
an
n tth
he
e bbl
la
ad
de
es
s.
.
•F
Fo
or
r ssa
af
fe
et
ty
y rre
ea
as
so
on
ns
s,
, wwi
ip
pe
er
r bbl
la
ad
de
es
s ssh
ho
ou
ul
ld
d bbe
e rre
en
ne
ew
we
ed
d oon
nc
ce
e oor
r ttw
wi
ic
ce
e aa yye
ea
ar
r.
.
B Bl
la
ad
de
es
s cca
an
n bbe
e ppu
ur
rc
ch
ha
as
se
ed
d aat
t TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
es
s.
.
W
WA
AR
RN
NI
IN
NG
G

83 Lights and visibility
Safety FirstControls and equipment Tips and Maintenance Technical Data
R
Re
ea
ar
r-
-v
vi
ie
ew
w mmi
ir
rr
ro
or
rs
s
Adjusting mirrors
The rear view mirrors should always be adjusted properly before
moving off so that good vision to the rear is obtained.
K
Anti-dazzle interior mirror
The lever on the lower edge of the mirror should be pointing to the
rear when the basicsetting is made.
To set the anti-dazzle position, pull lever forwards.
E Ex
xt
te
er
ri
io
or
r mmi
ir
rr
ro
or
rs
s cco
on
nt
tr
ro
ol
ll
le
ed
d mme
ec
ch
ha
an
ni
ic
ca
al
ll
ly
y ffr
ro
om
m iin
ns
si
id
de
e
are adjusted
with the knob in the door trim panel.
K
Automatic* anti-dazzle interior mirror
The automaticanti-dazzle function can be switched on and off as
desired.
S Sw
wi
it
tc
ch
hi
in
ng
g oof
ff
f aan
nt
ti
i-
-d
da
az
zz
zl
le
e ffu
un
nc
ct
ti
io
on
n
Press button
A– the indicator lampBwill go out.
S Sw
wi
it
tc
ch
hi
in
ng
g oon
n aan
nt
ti
i-
-d
da
az
zz
zl
le
e ffu
un
nc
ct
ti
io
on
n
Press button
A– the indicator lamp Bwill light up.
A An
nt
ti
i-
-d
da
az
zz
zl
le
e ffu
un
nc
ct
ti
io
on
n
The anti-dazzle function is activated every time the ignition is
switched on. The green indicator lamp lights up in the mirror
housing.
A
B
B5P-0177Fig. 66


84Lights and visibility
When the anti-dazzle function is activated the interior mirror will
darken automatically according to the amount of light it receives
(for example from the headlights of a vehicle behind). The anti-
dazzle function is cancelled if reverse gear is engaged.
N No
ot
te
e
•The automaticanti-dazzle function will only work properly if the sun
blind* for the rear window is retracted and there are no other objects
preventing light from reaching the interior mirror.
•If you have to stick any type of sticker on the windscreen, do not do so in
front of the sensors. Doing so could prevent the anti-dazzle function from
working well or even from working at all.
K
Electrically adjustable mirrors*
Electrically adjustable mirrors* are set by pressing the edge of the
knob Ain the driver’s door trim.
The surface of the mirror may be angled upwards, downwards, to
the left or the right, as required.
With swivel knob
Aselect the driver or passenger wing mirrors.
– Defog mirrors
1)
R R
– Driver’s mirror
L L
– Passenger’s mirror
When adjusting the left rear-view mirror, the right one should move
at the same time.
If you wish to adjust the right rear-view mirror separately, you only
need to activate the right mirror.
If at any time, the electrical adjustment fails, the mirrors can be
adjusted manually by pressing on their respective surfaces.
N No
ot
te
e ffo
or
r vve
eh
hi
ic
cl
le
es
s wwi
it
th
h cco
on
nv
ve
ex
x oor
r ssp
ph
he
er
ri
ic
ca
al
l oou
ut
ts
si
id
de
e mmi
ir
rr
ro
or
rs
s*
*
C Co
on
nv
ve
ex
x
(curved outwards) mirrors enlarge the field of vision but
make objects look smaller. T Th
he
es
se
e mmi
ir
rr
ro
or
rs
s aar
re
e oon
nl
ly
y oof
f lli
im
mi
it
te
ed
d uus
se
e iin
n
c co
or
rr
re
ec
ct
tl
ly
y cca
al
lc
cu
ul
la
at
ti
in
ng
g tth
he
e ddi
is
st
ta
an
nc
ce
e oof
f tth
he
e vve
eh
hi
ic
cl
le
e bbe
eh
hi
in
nd
d yyo
ou
u.
.
S Sp
ph
he
er
ri
ic
ca
al
l
exterior mirrors have a mirror surface with a different
curvature. These wide angle mirrors increase the field of vision
even more than convex mirrors. T Th
he
ei
ir
r uus
se
ef
fu
ul
ln
ne
es
ss
s iis
s aal
ls
so
o lli
im
mi
it
te
ed
d
w wh
he
en
n ees
st
ti
im
ma
at
ti
in
ng
g tth
he
e ddi
is
st
ta
an
nc
ce
e oof
f vve
eh
hi
ic
cl
le
es
s aap
pp
pr
ro
oa
ac
ch
hi
in
ng
g ffr
ro
om
m
b be
eh
hi
in
nd
d.
.
K
Fig. 67
RL
A
IBN-009
1)Take into account that this function is activated with the ignition connected, and as
such, it is advisable to maintain the control in the L Lor R
Rposition.

85 Lights and visibility
Safety FirstControls and equipment Tips and Maintenance Technical Data
Mirror heating*
Electrically operated outside mirrors are heated in the defogging
position. The ignition must be switched on for this function.
Once the mirrors are defogged place the switch in the
L Lor R
R
position to avoid unnecessary battery discharge. K
Fold in exterior mirrors
The exterior mirrors of the vehicle can be folded in.
To do this, pull mirror housing towards the vehicle.
N No
ot
te
e
•Before putting the vehicle through an automatic washing plant, the
mirrors should be folded in to prevent them from becoming damaged.K
Folding exterior mirrors back
It is mandatory to drive with the rear-view mirrors placed in use
position.
K
Electric folding wing mirrors*
Use controlAto select the passenger or driver’s wing mirror, or
the fold-away function, as well as mirror adjustment
⇒fig. 68.
– Mirror demisting
1)
R R
– Driver’s wing mirror
L L
– Passenger’s wing mirror
– Folding away of wing mirrors
The fold-away position is recommended, for example, when
parking or driving in cramped conditions.
RL
A
L
R
IBN-104Fig. 68
1)Take into account that this function is activated with the ignition connected, and as
such, it is advisable to maintain the control in the L L
or R R
position.


89 Seats and luggage compartment
Safety FirstControls and equipment Tips and Maintenance Technical Data
Heated seats*
S
Se
ea
at
t hhe
ea
at
ti
in
ng
g*
* ffo
or
r lle
ef
ft
t sse
ea
at
t 1
The cushion and backrest of the front seats can be heated
electrically when the ignition is on.
The heating is connected and regulated with the knurled wheel.
To switch heating off, turn knurled wheel to the basic position (
0).
S Se
ea
at
t hhe
ea
at
ti
in
ng
g*
* ffo
or
r rri
ig
gh
ht
t sse
ea
at
t
2
The cushion and backrest of the front seats can be heated
electrically when the ignition is on.
The heating is connected and regulated with the knurled wheel.
To switch heating off, turn knurled wheel to the basic position (
0).N No
ot
te
e
An automatic provisional disconnection of the function may take place to
avoid a possible deterioration of the battery. Once the normal functioning
conditions are established the function is resumed.
K
H He
ea
ad
d rre
es
st
tr
ra
ai
in
nt
ts
s*
*
Correct adjustment of head restraints
The head restraints are height adjustableand should be set to
suit the size of the occupant. Correctly adjusted head restraints
together with the seat belts offer effective protection. The front
head restraints can also be adjusted to a different angle.
B1S-017PFig. 71
Fig. 70
OO
12
IBN-048


113 Driving
Safety FirstControls and equipment Tips and Maintenance Technical Data
D
Dr
ri
iv
vi
in
ng
g
M
Ma
an
nu
ua
al
l gge
ea
ar
rb
bo
ox
x
Driving a car with a manual gearbox
Reverse gear may only be engaged when the vehicle is stationary.
When engine is running, depress clutch fully and wait a few
seconds before moving gear lever, to prevent grating noises.
When reverse gear is engaged with ignition on, the reversing lights
come on.
Some model versions may have 6 gears*. Its layout is indicated on
the selector lever.N No
ot
te
e
For safety reasons, do not rest your hand on the gear lever while driving.K
A
Au
ut
to
om
ma
at
ti
ic
c gge
ea
ar
rb
bo
ox
x*
*
Driving programmes
The gearbox management is fitted with several driving
programmes. According to the driving style or to the momentary
24
531
R
TO8-028
B8L-009
Fig. 89
Fig. 90


114Driving
situation, an “e
ec
co
on
no
om
my
y”,
, low-consumption, or a more “s
sp
po
or
rt
ty
y”
programme will be selected.
The programme is selected a au
ut
to
om
ma
at
ti
ic
ca
al
ll
ly
y
depending on the
movement of the accelerator pedal.
If the accelerator pedal is moved slowly, or at a normal rate, the
gearbox will shift into a higher gear earlier, and down into a lower
gear later to r re
ed
du
uc
ce
e ffu
ue
el
l cco
on
ns
su
um
mp
pt
ti
io
on
n
.
A more “s sp
po
or
rt
ty
y
” programme is selected when the accelerator pedal
movesf fa
as
st
t
. The pedal does not have to be depressed to the point
ofk ki
ic
ck
k-
-d
do
ow
wn
n
⇒page 116. In this mode, the gearbox will shift up
later to make full use of the engine power reserves.
The downward shift occurs at a higher rate of revolutions than in
the economy programmes.
The gear box is self adapting, and continuously selects the most
suitable gear programme. At the same time, the driver can also
make the gear box switch to a more “sporty” programme by
pressing the accelerator quickly. Depending on road speed, this
makes the gearbox shift down early into a lower gear for quicker
acceleration (for instance to overtake another vehicle), without
having to press the accelerator all the way down to the kick-down
position. After the gear box has shifted back up it returns to the
original programme, depending on your style of driving.
The gear box adapts the gear shifts for uphill and downhill
gradients. This prevents the gearbox from shifting up and downunnecessarily on uphill gradients. On downhill gradients, the
gearbox shifts down into a lower gear when the driver presses the
brake pedal. This makes use of the braking effect of the engine
without having to change down manually
N No
ot
te
e
Depending on road resistance, for example when trailer towing or on uphill
stretches, a programme is automatically selected which provides more
power by shifting into a lower gear. This prevents frequent gear changes.
K
Selector lever lock
In positions “P P
” and “N N
” with the ignition switched on the selector
lever is locked. To move the selector lever out of these positions
the brake pedal must be depressed and the selector lever button
pushed-in. This prevents a gear being engaged inadvertently and
the vehicle unintentionally moving off.
A delay circuit prevents the selector lever from locking when it is
moved quickly past the “N N
” position (for instance from “R R
” to “D D
”).
This enables for example the vehicle to be “rocked” out of a
“bogged down” position. The shift lock only locks the selector
lever if it is left in the “N N
” position for more than about 1 second
without the brake pedal being depressed.
At speeds above 5 km/h the selector lever lock is automatically
switched-off in position “N N
”.
K