change time Seat Cordoba 2005 Owner's Manual

40Instrument panel
Revolutions counter*
C
Ca
au
ut
ti
io
on
n
On no account must the revolutions counter needle move into the red zone
of the scale.
F Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
Changing up in good time helps to save fuel and keep the noise down.
Change down a gear at the latest when the engine turn over is no
longer smooth.
Avoid high engine revolutions during the running-in period.
K
Coolant temperature
The gauge starts to work when the ignition is switched on.
When the ignition is switched on the warning lamp
cflashes for a
few seconds as a functional check.
aC Co
ol
ld
d
Avoid high engine speeds and do not work engine too hard yet.
bN
No
or
rm
ma
al
l
When the vehicle is driven normally the needle should settle down in the
central zone.
When engine is working hard and the ambient temperature is high, the
needle may move a long way up.
T Th
hi
is
s iis
s nno
ot
t sse
er
ri
io
ou
us
s aas
s llo
on
ng
g aas
s tth
he
e wwa
ar
rn
ni
in
ng
g lla
am
mp
p
cd
do
oe
es
s nno
ot
t ffl
la
as
sh
h.
.
cW
Wa
ar
rn
ni
in
ng
g lla
am
mp
p
If the lamp flashes and a tone is heard at the same time when driving, first
check the coolant temperature being displayed.
If the needle is in the normal zone, top the coolant up at the next
opportunity.
If the reading is in the right hand area, the temperature of the coolant level
is too high. S St
to
op
p,
, ssw
wi
it
tc
ch
h een
ng
gi
in
ne
e oof
ff
f
and try to find cause of trouble
⇒"Cooling system" chapter.
5
6
1/1
1/5090130
PRND432
ab
c
IBN-102Fig. 35
N No
ot
te
e wwa
ar
rn
ni
in
ng
gs
s iin
n ""C
Co
oo
ol
li
in
ng
g ssy
ys
st
te
em
m"
" cch
ha
ap
pt
te
er
r.
.
W
WA
AR
RN
NI
IN
NG
G


46Instrument panel
C
Ca
au
ut
ti
io
on
n
We do not recommend that you reset the service interval indicator on your
own. This could result in an incorrect setting and could cause possible
vehicle anomalies.
N No
ot
te
e
• The desired service message must be reset in each case. If not, the time
frame for another service could be incorrect. You can change from one
message to another by pressing the reset button.• Do not reset the indicator between two service intervals. Otherwise, the
indication could be erroneous.
• The values are saved even if the battery of the vehicle is disconnected.
• If the combined instrument is replaced after repair work, the service
interval indicator must be reset by a Technical Service Centre.
K

78Lights and visibility
• Left turn signals – lever down2
When turn signals are working, the warning lamp flashes as well⇒
"Warning lamps" chapter.
The turn signals switch off automatically when the steering wheel
returns to its normal position.
T To
o ssi
ig
gn
na
al
l aa lla
an
ne
e cch
ha
an
ng
ge
e
For rapid manoeuvres such as lane changes, lift
1or press down2the lever only to the point of pressure and hold it in position.
If the lever is used with a slight pulsation the indicator will blink
three times.
H He
ea
ad
dl
li
ig
gh
ht
t ffl
la
as
sh
he
er
r
Pull the lever towards the steering wheel
3– the main beam
warning lamp will light up.
H Hi
ig
gh
h bbe
ea
am
m lli
ig
gh
ht
t
To engage the high beam lights, push the lever forward with the
low beam lights connected
4. The corresponding warning lamp
will light up when the high beam light is on.
P Pa
ar
rk
ki
in
ng
g lli
ig
gh
ht
ts
s*
*
The parking lights only work when ignition is switched off.
Right parking lights – lever up
1
Left parking lights – lever down2
If the ignition key has been removed, a buzzer* will sound when
the driver’s door is open.N No
ot
te
e
The use of the signals and lighting described here is subject to local
regulations.K
I In
nt
te
er
ri
io
or
r lli
ig
gh
ht
ts
s
Front interior light
Switch positionsA:
0–Off
Right – Door contact switch
Left – Light on continuously
B45-144CFig. 62


114Driving
situation, an “e
ec
co
on
no
om
my
y”,
, low-consumption, or a more “s
sp
po
or
rt
ty
y”
programme will be selected.
The programme is selected a au
ut
to
om
ma
at
ti
ic
ca
al
ll
ly
y
depending on the
movement of the accelerator pedal.
If the accelerator pedal is moved slowly, or at a normal rate, the
gearbox will shift into a higher gear earlier, and down into a lower
gear later to r re
ed
du
uc
ce
e ffu
ue
el
l cco
on
ns
su
um
mp
pt
ti
io
on
n
.
A more “s sp
po
or
rt
ty
y
” programme is selected when the accelerator pedal
movesf fa
as
st
t
. The pedal does not have to be depressed to the point
ofk ki
ic
ck
k-
-d
do
ow
wn
n
⇒page 116. In this mode, the gearbox will shift up
later to make full use of the engine power reserves.
The downward shift occurs at a higher rate of revolutions than in
the economy programmes.
The gear box is self adapting, and continuously selects the most
suitable gear programme. At the same time, the driver can also
make the gear box switch to a more “sporty” programme by
pressing the accelerator quickly. Depending on road speed, this
makes the gearbox shift down early into a lower gear for quicker
acceleration (for instance to overtake another vehicle), without
having to press the accelerator all the way down to the kick-down
position. After the gear box has shifted back up it returns to the
original programme, depending on your style of driving.
The gear box adapts the gear shifts for uphill and downhill
gradients. This prevents the gearbox from shifting up and downunnecessarily on uphill gradients. On downhill gradients, the
gearbox shifts down into a lower gear when the driver presses the
brake pedal. This makes use of the braking effect of the engine
without having to change down manually
N No
ot
te
e
Depending on road resistance, for example when trailer towing or on uphill
stretches, a programme is automatically selected which provides more
power by shifting into a lower gear. This prevents frequent gear changes.
K
Selector lever lock
In positions “P P
” and “N N
” with the ignition switched on the selector
lever is locked. To move the selector lever out of these positions
the brake pedal must be depressed and the selector lever button
pushed-in. This prevents a gear being engaged inadvertently and
the vehicle unintentionally moving off.
A delay circuit prevents the selector lever from locking when it is
moved quickly past the “N N
” position (for instance from “R R
” to “D D
”).
This enables for example the vehicle to be “rocked” out of a
“bogged down” position. The shift lock only locks the selector
lever if it is left in the “N N
” position for more than about 1 second
without the brake pedal being depressed.
At speeds above 5 km/h the selector lever lock is automatically
switched-off in position “N N
”.
K

130Intelligent technology
I
In
nt
te
el
ll
li
ig
ge
en
nt
t tte
ec
ch
hn
no
ol
lo
og
gy
y
B
Br
ra
ak
ke
es
s
General notes
• Brake lining wear depends to a large extent on the operating
conditions and style of driving. On vehicles which are used mainly
in town traffic and stop/ start conditions or are driven hard it may
be necessary to have the thickness of the brake linings checked by
a Technical Service Centre in between the intervals given in the
Inspection and Service Schedule.
• Change down in good time when driving downhill, in order to
make use of the engine braking effect. This relieves strain on the
brake system. When the brakes are applied do not keep them on
continuously, apply and release alternately.
K
What can have a negative effect on the brakes?
W We
et
t oor
r ggr
ri
it
tt
te
ed
d rro
oa
ad
d ssu
ur
rf
fa
ac
ce
eO Ov
ve
er
rh
he
ea
at
ti
in
ng
g oof
f tth
he
e bbr
ra
ak
ke
es
s
•U
Un
nd
de
er
r cce
er
rt
ta
ai
in
n cco
on
nd
di
it
ti
io
on
ns
s ee.
.g
g.
. aaf
ft
te
er
r ddr
ri
iv
vi
in
ng
g tth
hr
ro
ou
ug
gh
h wwa
at
te
er
r,
, hhe
ea
av
vy
y rra
ai
in
n ffa
al
ll
ls
s
o or
r aaf
ft
te
er
r tth
he
e vve
eh
hi
ic
cl
le
e hha
as
s bbe
ee
en
n wwa
as
sh
he
ed
d,
, tth
he
e bbr
ra
ak
ke
es
s cco
ou
ul
ld
d sse
et
t iin
n lla
at
te
er
r tth
ha
an
n
n no
or
rm
ma
al
l ddu
ue
e tto
o dda
am
mp
p,
, oor
r iin
n wwi
in
nt
te
er
r –– ffr
ro
oz
ze
en
n,
, bbr
ra
ak
ke
e ddi
is
sc
cs
s aan
nd
d lli
in
ni
in
ng
gs
s –– tth
he
e
b br
ra
ak
ke
es
s mmu
us
st
t ffi
ir
rs
st
t bbe
e ddr
ri
ie
ed
d tth
hr
ro
ou
ug
gh
h cca
ar
re
ef
fu
ul
l bbr
ra
ak
ki
in
ng
g.
.
W
WA
AR
RN
NI
IN
NG
G
•F Fu
ul
ll
l bbr
ra
ak
ki
in
ng
g ppo
ow
we
er
r mmi
ig
gh
ht
t aal
ls
so
o sse
et
t iin
n lla
at
te
er
r tth
ha
an
n nno
or
rm
ma
al
l eev
ve
en
n wwh
he
en
n ddr
ri
iv
vi
in
ng
g
o on
n ggr
ri
it
tt
te
ed
d rro
oa
ad
ds
s iif
f yyo
ou
u hha
av
ve
e nno
ot
t bbr
ra
ak
ke
ed
d ffo
or
r sso
om
me
e tti
im
me
e –– tth
he
e lla
ay
ye
er
r oof
f ssa
al
lt
t oon
n
t th
he
e bbr
ra
ak
ke
e ddi
is
sk
ks
s aan
nd
d bbr
ra
ak
ke
e lli
in
ni
in
ng
gs
s mmu
us
st
t ffi
ir
rs
st
t bbe
e wwo
or
rn
n ddo
ow
wn
n wwh
hi
il
ls
st
t bbr
ra
ak
ki
in
ng
g.
.
W
WA
AR
RN
NI
IN
NG
G ((c
co
on
nt
ti
in
nu
ue
ed
d)
)
• • NNe
ev
ve
er
r lle
et
t tth
he
e bbr
ra
ak
ke
es
s ““r
ru
ub
b”
” bby
y ppr
re
es
ss
si
in
ng
g tth
he
e ppe
ed
da
al
l tto
oo
o lli
ig
gh
ht
tl
ly
y wwh
he
en
n yyo
ou
u ddo
o
n no
ot
t rre
ea
al
ll
ly
y nne
ee
ed
d tto
o bbr
ra
ak
ke
e.
. TTh
hi
is
s cca
au
us
se
es
s tth
he
e bbr
ra
ak
ke
es
s tto
o oov
ve
er
rh
he
ea
at
t,
, lle
ea
ad
ds
s tto
o
l lo
on
ng
ge
er
r bbr
ra
ak
ki
in
ng
g ddi
is
st
ta
an
nc
ce
es
s aan
nd
d tto
o aa hhi
ig
gh
he
er
r lle
ev
ve
el
l oof
f wwe
ea
ar
r.
.
• • BBe
ef
fo
or
re
e sst
ta
ar
rt
ti
in
ng
g oon
n aa llo
on
ng
g sst
tr
re
et
tc
ch
h oof
f rro
oa
ad
d iin
n aa vve
er
ry
y hhi
il
ll
ly
y aar
re
ea
a,
, ppl
le
ea
as
se
e rre
ed
du
uc
ce
e
y yo
ou
ur
r ssp
pe
ee
ed
d,
, cch
ha
an
ng
ge
e tto
o aa llo
ow
we
er
r gge
ea
ar
r ((m
ma
an
nu
ua
al
l gge
ea
ar
rb
bo
ox
x)
) oor
r cch
ho
oo
os
se
e aa llo
ow
we
er
r
p po
os
si
it
ti
io
on
n ((a
au
ut
to
om
ma
at
ti
ic
c gge
ea
ar
rb
bo
ox
x)
).
. IIn
n tth
hi
is
s wwa
ay
y yyo
ou
u wwi
il
ll
l uus
se
e tth
he
e bbr
ra
ak
ki
in
ng
g ppo
ow
we
er
r oof
f
t th
he
e een
ng
gi
in
ne
e aan
nd
d rre
el
li
ie
ev
ve
e ppr
re
es
ss
su
ur
re
e oon
n tth
he
e bbr
ra
ak
ke
es
s.
.
• • IIf
f aa ffr
ro
on
nt
t ssp
po
oi
il
le
er
r,
, ffu
ul
ll
l ssi
iz
ze
e wwh
he
ee
el
l ttr
ri
im
ms
s eet
tc
c.
.,
, iis
s rre
et
tr
ro
of
fi
it
tt
te
ed
d,
, iit
t iis
s nne
ec
ce
es
ss
sa
ar
ry
y tto
o
e en
ns
su
ur
re
e tth
ha
at
t tth
he
e ffl
lo
ow
w oof
f aai
ir
r tto
o tth
he
e ffr
ro
on
nt
t bbr
ra
ak
ke
es
s iis
s nno
ot
t rre
es
st
tr
ri
ic
ct
te
ed
d –– oot
th
he
er
rw
wi
is
se
e
t th
he
e bbr
ra
ak
ke
es
s cca
an
n oov
ve
er
rh
he
ea
at
t.
.
K
W WA
AR
RN
NI
IN
NG
G

132Intelligent technology
D
De
es
sc
cr
ri
ip
pt
ti
io
on
n aan
nd
d oop
pe
er
ra
at
ti
io
on
n oof
f tth
he
e ttr
ra
ac
ct
ti
io
on
n cco
on
nt
tr
ro
ol
l ssy
ys
st
te
em
m ddu
ur
ri
in
ng
g
a ac
cc
ce
el
le
er
ra
at
ti
io
on
n ((T
TC
CS
S)
)
TCS reduces engine power to help prevent the drive wheels of front-
wheel drive vehicles losing traction during acceleration. The system
works in the entire speed range in conjunction with ABS. If a
malfunction should occur in the ABS, the TCS will also be out of
action.
TCS helps the vehicle to start moving, accelerate and climb a
gradient in slippery conditions where this may otherwise be
difficult or even impossible.
The TCS is switched on automatically when the engine is started. If
necessary, it may be turned on or off by briefly pushing the button
on the centre console.
When the TCS is off, the warning lamp is lit.
The TCS should normally be left switched on at all times. Only in
exceptional circumstances, when slipping of the wheels is
required, should it be disconnected, for example:
– With compact temporary spare wheel.
– When using the snow chains
– When driving in deep snow or on loose surfaces
– When the vehicle is bogged-down, to free it by rocking it.
The TCS should be switched on again afterwards as soon as
possible.N No
ot
te
e• In order to ensure that TCS function correctly, all four wheels must be
fitted with the same tyres. Any differences in the rolling radiusof the tyres
can cause the system to reduce engine power when this is not desired.
• Modifications to the vehicle (e.g. to the engine, the brake system, running
gear or any components affecting the wheels and tyres) could affect the
efficiency of the ABS and TCS.
K
E El
le
ec
ct
tr
ro
on
ni
ic
c sst
ta
ab
bi
il
li
is
sa
at
ti
io
on
n ppr
ro
og
gr
ra
am
mm
me
e ((E
ES
SP
P)
)*
*
General notes
The electronic stabilisation program increases the vehicle’s
stability on the road.
The electronic stabilisation program helps to reduce the danger of
skidding. It includes the A AB
BS
S
, E ED
DL
L
and T TC
CS
S
systems.
H Ho
ow
w EES
SP
P wwo
or
rk
ks
s
ESP reduces the danger of skidding by braking the wheels
individually.
The system uses the steering wheel angle and road speed to
calculate the changes of direction desired by the driver, and
• • IIt
t mmu
us
st
t bbe
e rre
em
me
em
mb
be
er
re
ed
d tth
ha
at
t TTC
CS
S cca
an
nn
no
ot
t dde
ef
fy
y tth
he
e lla
aw
ws
s oof
f pph
hy
ys
si
ic
cs
s.
. TTh
hi
is
s
s sh
ho
ou
ul
ld
d bbe
e kke
ep
pt
t iin
n mmi
in
nd
d,
, ppa
ar
rt
ti
ic
cu
ul
la
ar
rl
ly
y oon
n ssl
li
ip
pp
pe
er
ry
y aan
nd
d wwe
et
t rro
oa
ad
ds
s aan
nd
d wwh
he
en
n
t to
ow
wi
in
ng
g aa ttr
ra
ai
il
le
er
r.
.
W
WA
AR
RN
NI
IN
NG
G
• • AAl
lw
wa
ay
ys
s aad
da
ap
pt
t yyo
ou
ur
r ddr
ri
iv
vi
in
ng
g sst
ty
yl
le
e tto
o ssu
ui
it
t tth
he
e cco
on
nd
di
it
ti
io
on
n oof
f tth
he
e rro
oa
ad
ds
s aan
nd
d tth
he
e
t tr
ra
af
ff
fi
ic
c ssi
it
tu
ua
at
ti
io
on
n.
. DDo
o nno
ot
t lle
et
t tth
he
e eex
xt
tr
ra
a ssa
af
fe
et
ty
y aaf
ff
fo
or
rd
de
ed
d bby
y TTC
CS
S tte
em
mp
pt
t yyo
ou
u iin
nt
to
o
t ta
ak
ki
in
ng
g aan
ny
y rri
is
sk
ks
s wwh
he
en
n ddr
ri
iv
vi
in
ng
g,
, tth
hi
is
s cca
an
n cca
au
us
se
e aac
cc
ci
id
de
en
nt
ts
s.
.
W
WA
AR
RN
NI
IN
NG
G ((c
co
on
nt
ti
in
nu
ue
ed
d)
)


139 Your vehicle and the environment
Safety FirstControls and equipment Tips and Maintenance Technical Data
Suggestion 6. Avoid short drives
The engine and the catalytic converter must reach its optimum
functioning temperature in order to effectively reduce consumption
and toxic gas emissions.
The fuel consumption of a cold engine of a normal vehicle right
after the start is about 30-40 liters per 100 km. After about one
kilometer the consumption decreases to 20 liters. After about
f fo
ou
ur
r
kilometers the engine has warmed up and the consumption is
normal. For this reason, it is important to avoid short drives and
heating the vehicle’s engine when the vehicle is not moving. Drive
on quickly!
The ambient temperature also counts. The illustration shows the
difference in consumption (l/100km) for the same distance (km) at
+20°C and –10°C. Your vehicle’s consumption is higher in the
summer than in the winter
⇒fig. 102.K
Suggestion 7. Check the tyre pressure
Make sure that the tyres have always adequate pressure. Even half
a bar less increases the level of fuel consumption by 5 percent. If
the pressure is not correct, the tyres wear out faster due to an
excessive deformation and overheating which, in turn, will
decrease the driving performance.
Always check the tyre pressure when the tyre is cold.
In addition, do not drive year round with winter tyres. They make
more noise and increase fuel consumption by 10 percent. Change
to summer tyres on time.
K
Suggestion 8. Avoid unnecessary weight
Apart from driving habits and periodic revisions of your vehicle,
there are other ways to reduce fuel consumption:
A Av
vo
oi
id
d uun
nn
ne
ec
ce
es
ss
sa
ar
ry
y wwe
ei
ig
gh
ht
t
Every kilogram increases fuel consumption. For this reason, it is
worth checking your boot to avoid unnecessary weight.
Frequently, the roof rack will stay on the roof even though it is no
longer needed. Due to greater air resistance, an unloaded roof
rack at a speed of 100-120 km/h increases the consumption by
approx. 12%.
K
5+20°C –10°C
15 25km
30
l/100km
B45-356PFig. 102

142Your vehicle and the environment
•In vehicles without air conditioning, the cooling system should
be reinforced if a towing device is fitted at a later stage.
Failure to do so will submit the engine to greater stress (steep
slopes, high temperatures, heavy towing loads, etc.) and result in
overheating of the engine. For more information, contact a
Technical Service Centre.
•When using a trailer on mountain routes you must bear in mind
that the tow loads given in the “Technical data” chapter are only
applicable for slopes of 10% to 12%. If you do not use the full tow
load you may drive up steeper slopes.
•The given trailer weights are only applicable for altitudes up
to 1000 m above sea level. As the engine output drops due to
the decreasing air density, the climbing ability must also be
reduced by 10% for each further 1000 m.
•Where possible make full use of the maximum permissible
drawbar weight on the ball of the towing bracket but do not exceed
it
⇒chapter “Technical Data”.
•While observing the permissible trailer and drawbar weight,
distribute the load in the trailer so that heavy objects are as near
as possible to the axle. The objects must also be secured so that
they cannot slip about.
•The tyre pressures on the towing vehicle must be adjusted for full
load conditions, and also check the pressures on the trailer.
•Headlight settings should be checked, with the trailer attached,
before beginning the journey and adjusted as necessary.
On vehicles with headlight beam control it is only necessary to turn
the knurled disc on the dash board in the appropriate direction.D Dr
ri
iv
vi
in
ng
g iin
ns
st
tr
ru
uc
ct
ti
io
on
ns
s
To obtain the best possible handling of vehicle and trailer, the
following should be noted:
• Try to avoid driving with an unladen vehicle and a loaded trailer.
If this cannot be avoided, only drive slowly to allow for the
unfavourable weight distribution.
• As driving stability of vehicle and trailer decreaseswhen the
speed increases do not drive at the maximum permissible top
speed in unfavourable road, weather or wind conditions –
particularly when going downhill.
In any case the speed must be reduced as soon as the trailer
shows the slightest sign of snaking. On no account try to stop the
snaking by accelerating.
• • FFo
or
r ssa
af
fe
et
ty
y rre
ea
as
so
on
ns
s oon
ne
e ssh
ho
ou
ul
ld
d nno
ot
t ddr
ri
iv
ve
e ffa
as
st
te
er
r tth
ha
an
n 880
0 kkm
m/
/h
h
( (5
50
0 mmp
ph
h)
).
. TTh
hi
is
s aal
ls
so
o aap
pp
pl
li
ie
es
s iin
n cco
ou
un
nt
tr
ri
ie
es
s wwh
he
er
re
e hhi
ig
gh
he
er
r ssp
pe
ee
ed
ds
s aar
re
e
p pe
er
rm
mi
it
tt
te
ed
d.
.
• Always brake in good time. If the trailer has an overrun brake,
apply the brakes gently at first then firmly. This will avoid the
jerking caused by the trailer wheels locking.
Change down before going down a steep hill so that the engine
can act as a brake.
• When a long climb in a low gear with extremely high engine revs
must be negotiated at exceptionally high ambient temperatures
the coolant temperature gauge must be observed. When the gauge
needle moves to the right end of the scale, the road speed must be
reduced immediately.
• The cooling effect of the radiator fan cannot be increased by
changing down, because the speed of the fan is not dependent on


158Checking and refilling
E
En
ng
gi
in
ne
e ooi
il
l
Specifications
The engine comes with a special, high quality, multi grade oil that
can be used in all seasons of the year except for those regions
affected by extreme cold.
As the use of high quality oil is essential for the correct operation
of the engine and its long useful life, when topping up or
replacement is necessary use only those oils that conform to the
requirements of the VW standards.
If it is not possible to find oil conforming to the VW standards then
oil conforming to the ACEA or API standards with an appropriate
viscosity at atmospheric temperature should be used instead. The
use of this type of oil may have some repercussions on the
performance of the engine for example, long starting time,
increased consumption and a higher emission level.
If a top up is required then different oils may be mixed as long as
they all conform to the VW standards.
The specifications (VW standards) set out in the following page
should appear on the container of the service oil; the container will
display together the different standards for petrol and diesel
engines, the oil can be used for both types of engines.
K
Oil properties
V Vi
is
sc
co
os
si
it
ty
y
The viscosity class is selected according to the diagram above. If
atmospheric temperature falls outside of the described limits for
only a short period then an oil change is not necessary.
B1H-149Fig. 120


SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand,
that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no
right at all may derive based on the data, drawings and descriptionsin this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error
or omission, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the "Copyright" Act.
All rights on changes are reserved.
❀This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A. - Reprint: 15.04.05