Seat Leon 2020 Owner's Guide

Airbag system
Activate and deactivate front pas-
senger fr ont airbag*Fig. 20
Switch for activating and deactivating
the fr ont passenger airbag. Fig. 21
On the roof console: control lamp for
the deactiv ation of the fr
ont passenger front
airbag. Deactivate the front passenger front airbag
only if you hav
e t

o use a rear-facing child
seat in the front passenger seat. SEAT recommends fitting the child seat in the
rear seat t

o avoid having to deactivate the
front passenger airbag.
When the front passenger airbag is deacti-
vated, this means that only the front passen-
ger front airbag is deactivated. All the other
airbags in the vehicle remain activated.
Deactivate and activate the front passen-
ger front airbag

Safety
Knee airbag* Fig. 22
On the driver side: location of the knee
airbag Fig. 23
On the driver side: airbag action radius
f or the knees. The knee airbag is located on the driver side
bel
o
w the dash panel ››› Fig. 22
. Airbags are
identified by the word “AIRBAG”.
The area framed in red (deployment area)
››› Fig. 23 is covered by the knee airbag when it is deployed. Objects should never be
placed or mount

ed in this area. WARNING

Airbag system

Safety

Transporting children safely

Safety
These systems have been especially de-
signed and appr o
ved, complying with the
ECE-R44. regulation.
SEAT recommends securing the child seats
shown on the website as described below:

Transporting children safely
universal approval, requires safety devices to
l ock the chil
d seat, which require additional
testing. Child seats with semi-universal ap-
proval include a list of vehicle models for
which they can be installed.

Safety
highest position. The backrest must also be
put in a v ertical position 1)
.
Impor
tant information about the front pas-
senger front airbag
A sticker with important information about the
passenger airbag is located on the passeng-
er's sun visor and/or on the passenger side
door frame ››› Fig. 30
.
Read and always observe the safety informa-
tion included in the following chapters:

Transporting children safely
Attachment systems overview

Safety
Fit a child seat with the ISOFIX / i-Size and Top Tether system Fig. 32
Rear seat: die cut slots to access the
ISOFIX / iSiz e securing rings. Fig. 33
Front passenger seat: ISOFIX/i-Size se-
curing rings. Child seats can be secured quickly, easily
and saf
ely on the r
ear side and passenger
seats with the “ISOFIX” and Top Tether sys-
tem.
Two “ISOFIX” securing rings are fitted on each
rear side and passenger seat. In some vehi- cles, the rings are secured to the seat frame
and, in others, they are secur
ed to the rear
floor. The “ISOFIX” rings are located between
the rear seat backrest and the seat cushion-
ing ››› Fig. 32
,
››› Fig. 33
. The Top Tether rings
are located on the rear part of the rear seat backrests (behind the backrest or in the lug-
gage compartment)
››
› page 40
.
To understand the compatibility of the “ISO-
FIX” systems in the vehicle, check the table
below.
Vehicle ISOFIX positions Weight group Size class
a)
Electrical
equipment Front passenger seat
Rear side seatRear central
seat
airbag enabled airbag disabled
Group 0 to 10 kg EISO/R1 X ILILX
IUF: Suitable for forward-facing ISOFIX universal child restraint systems approved for use in this weight group.
IL : It is suit

able for certain ISOFIX child restraint systems (CRS) that can be for the specific vehicle, restricted or semi-universal categories. Take the child seat manufacturer