Seat Leon 2020 Service Manual

Transporting children safely
Weight group Size class
a)
Electrical
equipment Front passenger seat
Rear side seatRear central
seat
airbag enabled airbag disabled
Group 0+ to 13 kg E
ISO/R1 X ILILX
D ISO/R2 X ILILX
C ISO/R3 X ILILX
Group I 9 to 18 kg D
ISO/R2 X ILILX
C ISO/R3 X ILILX
B ISO/F2 XIL, IUF IL, IUFX
B1 ISO/F2X XIL, IUF IL, IUFX
A ISO/F3 XIL, IUF IL, IUFX
Group II 15 to 25 kg B2/B3 ISO/B2/B3b)
X ILILX
Group III 22 to 36 kg B2/B3 ISO/B2/B3b)
X ILILX
IUF: Suitable for forward-facing ISOFIX universal child restraint systems approved for use in this weight group.
IL : It is suit
able for certain ISOFIX child restraint systems (CRS) that can be for the specific vehicle, restricted or semi-universal categories. Take the child seat manufacturer

Safety
Vehicle i-Size positions Front passenger seat
Rear side seatRear central seat
airbag enabled airbag disabled
X i-U i-U X
i-U: Position suitable for forward- or rear-facing i-Size child restraint systems with universal certification.
X : P
osition not suitable for i-Size child restraint systems. Securing the child seat with the “ISOFIX/i-
Siz
e” syst

em
You must follow the child seat manufacturer's
instructions.

Transporting children safely
Fig. 35
Front passenger seat: adjustment and
assembly accor ding t
o the Top Tether belt.Child seats with the Top Tether system come
with a str
ap f

or securing the seat to the vehi- cle anchor point, located at the back of the
rear seat backr

est and provide greater re-
straint.
The objective of this strap is to reduce for-
ward movements of the child seat in a crash,
to reduce the risk of injuries to the head from
hitting the inside of the vehicle.
Using the Top Tether in rear-facing moun-
ted seats
Currently, there are very few rear-facing child
safety seats that have Top Tether. Please
carefully read and follow the seat manufac-
turer instructions to learn the proper way to
install the Top Tether strap.
Securing the retainer strap

Safety
Fitting a child seat using the seat belt Fig. 36
On the rear seats: installing the child
seat. If you want to fit a universal approval catego-
ry (U) chil
d seat in your v
ehicle, you must
check that the seat is approved for your vehi-
cle. You will find any necessary information
on the child seat’s orange ECE approval la-
bel. The following table shows the different
fitting options. Weight group
Front passenger seat
a)
Rear side seat Rear central seat b)
Airbag enabled airbag disabledc)
Group 0 to 10 kg XUUU
Group 0+ to 13 kg XUUU
Group I 9 to 18 kg XUUU
Group II 15 to 25 kg XUFUFUF
Group III 22 to 36 kg XUFUFUF
X: Not compatible for the installation of seats install chairs in this configuration.
U: Suit abl

e for universal restraint systems for use in this weight group.
UF: Acceptable for front-facing universal-category child restraint systems approved for this mass group. a)
Compliance with current national legislation and the manufacturer's instructions is required when using or installing child seats.
b) For semi-universal chairs where the securing system is the car safety belt and the support bracket, do not use them in the centre rear seat.
c) Seats without height adjustment shoul d be pl

aced in their rearmost position. Seats with height adjustment should be placed in their rearmost and highest position.
42

Transporting children safely
Fitting a child seat using the seat belt

Emergencies
Emergencies
Self -help
Inf
ormation, assistance and
emergency call service*
How it works Fig. 37
On the roof console: voice service con-
tr ol

s Depending on the equipment, there is a con-
tr
ol on the r

oof console.
By pressing the buttons , > and 
››› Fig. 37, you can run the following voice
services:

Self-help
The following conditions may cause the
emer gency call service t
o function in a limi-
ted manner or the call to be diverted to the
112 emergency number:

Emergencies
Tyre repairs T MS (T
yre Mobility System)* The Anti-puncture kit* (Tyre Mobility System)
will r
eliably seal punct

ures caused by the
penetration of a foreign body of up to about
4 mm in diameter. Do not remove foreign
objects, e.g. screws or nails, from the tyre.
After inserting the sealant residue in the tyre,
you must again check the tyre pressure
about 10 minutes after starting the engine.
You should only use the tyre mobility set if the
vehicle is parked in a safe place, you are fa-
miliar with the procedure and you have the
necessary tyre mobility set! Otherwise, you
should seek professional assistance.
Do not use the tyre sealant in the following
cases:

Self-help
Anti-puncture kit contents* Fig. 39
Standard representation: anti-punc-
t ur
e kit contents. The anti-puncture kit is located underneath
the fl
oor co

vering in the luggage compart-
ment. It includes the following components
››› Fig. 39:
Valve insert remover
A sticker to be adhered to the instrument
cluster, within the driver's visual field, to
remind that the maximum advisable
speed “max. 80 km/h” or “max. 50 mph”
Filler tube with cap
Air compressor (depending on the ver-
sion, the model may vary).
ON/OFF switch
1 2
3
4
5 Air bleed screw (it can also be integrated
in the infl
at

or tube).
Warning provided by tyre pressure moni-
toring system (it can also be integrated in
the inflator tube).
Tube for inflating tyres
12 volt connector
Bottle of sealant
Spare tyre valve
The valve insert remover 1 has a gap at
the l o

wer end for a valve insert. The valve in-
sert can only be screwed or unscrewed in this
way. This also applies to its replacement part 11 .
Sealing and inflating a tyre Sealing the tyre

Emergencies
and request assistance from an authorised
t echnician.