ESP Seat Leon 5D 2009 COMMUNICATION SYSTEM
[x] Cancel search | Manufacturer: SEAT, Model Year: 2009, Model line: Leon 5D, Model: Seat Leon 5D 2009Pages: 35, PDF Size: 1.3 MB
Page 20 of 35
Communication19
Controls and equipment
Voice command mobile telephone installation
- Models: Ibiza / Ibiza SCBasic functions
The voice command system can be activated with the “press
to talk” button, located on the multi-function control.See ⇒page 31, “Bluetooth®”
Talk button
The voice command system can be activated with the “press to talk”
button located on the multi-function control.
If one of these buttons is pressed while using the voice command system, the
function is cancelled.
After pressing the “press to talk” button ⇒fig. 9 , wait a few seconds for
the sound signal, after which the vocal commands may be used. These commands may be used to manage the functions of the hands-free telephone
system as well as the phone book.
Phone book
The speech control system offers the option of creating and using an phone
book belonging to the vehicle system and independent of the mobile tele-
phone. This phone book may contain 50 entries.
WARNING
•Please concentrate on driving. As the driver, you have the responsibility
for your safety and that of others. For this reason, you should only use the
functions in a manner that allows you to maintain control of the vehicle in
all situations - otherwise, you may create an accident risk!•The speech system must not be used in cases of emergency, since the
voice changes in stressful situations. This could result in a failed or delayed
telephone connection. Always dial emergency numbers manually!
Fig. 9 Talk button on the
multi-function control
AC
AC
Sist Comunicacion_EN.book Seite 19 Mittwoch, 15. Juli 2009 6:45 18
Page 23 of 35
Communication
22Information on radio displayAn incoming call is indicated on the display. To accept, press button on
the multifunction control or multi-function button on the radio ⇒
page 21, fig. 11 . To reject the call, press multi-function button on the
radio ⇒page 21, fig. 11 .
To cancel the outgoing call, press multi-function button on the radio
⇒ page 21, fig. 11 .
Information regarding the mobile phone coverage is displayed on the radio
display.
Dialogue
The voice command system can be activated with the “press
to talk” button, located on the multi-function control.In this manual, Dialogue is defined as the time in which the speech control
system may receive vocal commands and provide assistance for completion
of different functions in case the user is hesitant and unsure how to proceed.
The system also responds by vocal messages. The dialogue is started and
Fig. 13 Incoming callFig. 14 Outgoing phone
call
AE
AA
AB
ABFig. 15 Current phone
call
Sist Comunicacion_EN.book Seite 22 Mittwoch, 15. Juli 2009 6:45 18
Page 26 of 35
Communication25
Controls and equipmentNotes on specifying telephone numbers:
•If the telephone number has more than 20 digits, the system will decline
and give the cue
Example for entering a telephone number:
A running dialogue can be cancelled at any time by pressing the talk button ⇒ page 19, fig. 9 .
Redial– Press the talk button .
– After the tone, say the command REDIAL.After giving the command the last number dialled via the hands-free system
will be dialled again.
Example for the REDIAL command:
A running dialogue can be cancelled at any time by pressing the talk button
⇒ page 20, fig. 10 .To record names in the phone book
You can store names along with a telephone number in the
internal telephone book.– Press the talk button . The beep tone indicates that the system
is ready.
– After the tone, say the command STORE NAME.After giving the command the system will request you to specify a name and
telephone number to store in the internal telephone book. The telephone
Speech command
Condition
Message
Action
DIAL NUMBER
Phone switched
on
Dialogue
for example,
ZERO, SEVEN,
THREE, ONE
Dialogue
If no command is specified, the system responds after about 5 seconds
with the next cue.No command
repeat, back, or
you can specify
additional digits>
Dialogue
THREE, NINE,
TWO
Dialogue
DIAL
Dialogue -The tel-
ephone number
0731492 will be
dialledEnd of dialogue
AC
Speech command
Condition
Message
Action
REDIAL
Phone switched
on
DialogueEnd of dialogue
AC
AC
AC
Sist Comunicacion_EN.book Seite 25 Mittwoch, 15. Juli 2009 6:45 18
Page 27 of 35
Communication
26book has enough memory for 50 names and numbers. You can specify the
digits from zero to nine .
The telephone number can be specified all at once, in blocks of digits (sepa-
rated by a brief pause), or as single digits. After each block of digits you
specify (separated by a brief pause) the system will repeat the digits. The
system can only recognise single digits (two, three, etc.), and not combina-
tions of digits (e.g. twenty-three).
Say STORE to store the entry into the telephone book.
A running dialogue can be cancelled at any time by pressing the talk button ⇒ page 20, fig. 10.
Note
•If the telephone number has more than 20 digits, the system will decline
and give the cue
block of digits.•Say repeat to have all the digits that have been recognised up to that
point repeated.•If two or more names sound alike, it is better to save the names including
the first name or some other distinguishing entry.•A running dialogue can be cancelled at any time by pressing the talk
button .•The telephone book works only in conjunction with the hands-free speech
control system; the entries are not stored on the phone's SIM card.
Speech command
Condition
Message
Action
STORE NAME
Telephone book
is not full
Dialogue
COMPANY XYZ
Dialogue
COMPANY XYZ
Dialogue
ZERO, ONE, TWO,
THREE
Dialogue
FOUR, FIVE, SIX
Dialogue
If no command is specified, the system responds after about 5 seconds
with the next cue.
No command
repeat, back,
delete, or you can
specify addi-
tional digits>
Dialogue
STORE
Dialogue - The
name COMPANY
XYZ with the tele-
phone number
0123456 will be
storedEnd of dialogue
AC
AC
Sist Comunicacion_EN.book Seite 26 Mittwoch, 15. Juli 2009 6:45 18
Page 28 of 35
Communication27
Controls and equipment
Calling a name in the phone book– Press the talk button .
– After the tone, say the command SELECT NAMEAfter the system has recognised this command, you may select a stored entry
from the telephone book to call the required number. The system best recog-
nises names spoken by the person who stored the name.
Example for selecting a name from the internal telephone book
A running dialogue can be cancelled at any time by pressing the talk button
⇒ page 20, fig. 10 .
Listening to the phone book
You can have the entries stored in the internal telephone book
read out to you.– Press the talk button ⇒page 20, fig. 10 . The beep tone indi-
cates that the system is ready.
–Say the command PLAY PHONE BOOK.After giving the command the system will read out the entries stored in the
phone book. If you press the talk button as an entry is being read, the
system will call the telephone number for that entry. Once the dialogue is
complete and the system is reactivated, you can also select an entry to call by
specifying the stored name.
Example for the PLAY PHONE BOOK command:
Speech command
Condition
Message
Action
SELECT NAME
Phone is
switched on, tele-
phone book con-
tains entries.
Dialogue
COMPANY XYZ
Dialogue
If no command is specified, the system responds after about 5 seconds
with the next cue.No command
repeat, back>
Dialogue
DIAL
Dialogue - The
telephone
number for Com-
pany XYZ is being
dialledEnd of dialogue
AC
AC
Speech command
Condition
Message
Action
PLAY PHONE
BOOK
The telephone
book contains
entries.
The telephone
book will then be
read out.End of dialogue
AC
AC
Sist Comunicacion_EN.book Seite 27 Mittwoch, 15. Juli 2009 6:45 18
Page 29 of 35
Communication
28Example for selecting an entry:To erase names from the phone book
You can delete entries from the internal telephone book.– Press the talk button ⇒page 19, fig. 9 . The beep tone indi-
cates that the system is ready.
– After the tone, say the command DELETE NAME.After giving this command you can delete a stored entry from the internal tele-
phone book. Example for deleting single names from the internal telephone book:
A running dialogue can be cancelled at any time by pressing the talk button
⇒ page 19, fig. 9 .
Note
•Say the command Repeat, if you would like to have the specified name
repeated by the system.•If you then say No, the system will answer with
will be ended.
Speech command
Condition
Message
Action
PLAY PHONE
BOOK
The telephone
book contains
entries; the talk
button is
pressed as the
entry is being
read out.
The selected
name will be
repeated. The tel-
ephone number
will be dialled.End of dialogue
ACAC
Speech command
Condition
Message
Action
DELETE NAME
The telephone
book contains
entries.
Dialogue
COMPANY XYZ
XYZ?>
Dialogue
If no command is specified, the system responds after about 5
seconds with the next cue.
Dialogue
No command
back>
Dialogue
YES
DialogueEnd of dia-
logue
AC
Sist Comunicacion_EN.book Seite 28 Mittwoch, 15. Juli 2009 6:45 18
Page 30 of 35
Communication29
Controls and equipment
To erase the phone book
You can delete the entire phone book or single entries.– Press the talk button ⇒page 19, fig. 9 .
– After the tone, say the command DELETE PHONE BOOK.After giving this command you can delete the entire internal phone book or
single entries as desired.
Example for deleting the entire internal telephone book: Example for deleting single names from the internal telephone book:Speech command
Condition
Message
Action
DELETE PHONE
BOOK
The telephone
book contains
entries.
whole phone
book?>
Dialogue
If no command is specified, the system responds after
about 5 seconds with the next cue.
Dialogue
No command
no>
Dialogue
YES
Dialogue
If no command is specified, the system responds after
about 5 seconds with the next cue.
Dialogue
AC
No command
no>
Dialogue
YES
All entries in the
phone book will
be deleted.End of dialogue
Speech command
Condition
Message
Action
DELETE PHONE
BOOK
The telephone
book contains
entries.
whole phone
book?>
Dialogue
If no command is specified, the system responds after
about 5 seconds with the next cue.
Dialogue
No command
no, repeat>
Dialogue
NO
The telephone
book will then be
read out.
No command
Talk button
pressed as the
entry to be
deleted is read
out.
(name)?>
Dialogue
If no command is specified, the system responds after
about 5 seconds with the next cue.
Dialogue
AC
Sist Comunicacion_EN.book Seite 29 Mittwoch, 15. Juli 2009 6:45 18