engine Seat Leon 5D 2010 Maintenance programme

Other services available
14Other services availableLegal Inspection ServiceThe legal inspections must be carried out at the interval s
prescribed.Many countries have legal requirements ob liging owners to have their vehicle
tested at specified intervals for safety for the user and for other traffic, as well
as ensuring that vehicle exhaust emissions meet the countries' regulations.
These revisions must be overseen by officially certified centres.
Your Technical Service can inform you abou t the inspections required by law,
and can check your vehicle in the course of an Inspection Service. This will
save you both time and money.
The Technical Service can also carry out the inspections required by law at the
client's request.
Even if you do not wish to take advanta ge of this service and decide to take
your car to an officially certified centre for this c heck, we recommend that you
speak to the manager of your Technica l Service first.
This person will be able to inform you of any p oints that require attention so
that your car does not fail the test and ha ve to be re-tested.Approved spare partsAll parts of your vehicle have been approve d by SEAT, especially those parts
on which your safety depends. For this reason , the parts used in the
Programmed Inspection Services or in an y vehicle repair must correspond
exactly to the manufacturer-defined requiremen ts. The approved SEAT spare parts have been designed especially for you
r vehicle. For this reason, we
recommend that Genuine approved SEAT spar es are always used.
In the Authorised SEAT Service Centres you wil l find the most important
approved spare parts. If in an exceptional case, the necessary parts are not in
stock, they can, in general, be obtained s wiftly.
The SEAT Service Centres in the EU provide a 24 mon th warranty
3) for
Approved Spare parts from the date they are fi tted or sold. It is therefore
advisable to retain the original invoice from th e Technical Service as proof of
the existing warranty.
More information about this may be obtain ed from your Technical Service.
Approved SEAT exchange partsThe approved SEAT exchange parts, conforming to the manufacturer’s
requirements, constitute an additional service at your disposal, offering you
the possibility to replace entire assemblie s, the most common being: the
lightened engine, gearboxes, cylinder head s, control units, electrical
elements, etc.
Of course these are Approved parts and, as they have the same class as the
manufacturer parts, they share the same S EAT approved spare parts warranty.
However, these parts are considerably cheap er as they are factory-recondi-
tioned used parts. Keep the invoice for the approved SEAT exchange parts as
proof of the start of the existing warranty.3)The warranty is not available for all e xport markets. For more information, ple ase ask
your Authorised SEAT Service Centre.
Prog Manto Ibizas-Alteas_EN.book Seite 14 Dienstag, 14. September 2010 11:40 11

Warranty
16WarrantyFault-free operation warrantyAccording to the clauses of the warranty appl ied to SEAT vehicles in the sales
contract, A fault-free operation warranty of 2 years in ac cordance with legal
requirements
4) 5) is provided from the date of delivery.
We hope that it is understood that natural wear as well as damage caused by
the abuse of vehicle performance throug h inappropriate use or by unaccept-
able modifications are excluded from the warran ty. The warranty is also
invalid when the vehicle is damaged by th e use of parts and accessories that
are not SEAT approved or damage due to ignoring the maintenance and repair
requirements.
Paintwork and body warrantyTechnical Services provide a warranty on bodywork and
paintwork for vehicles sold in the EU.In addition to the warranty conditions for b rand new SEAT vehicles (as
detailed in the purchase contract), a defined pe riod warranty is also provided
covering paintwork and bodywork rusting:•The additional warranty on paint faults cov ers the first 3 years following
delivery
•Covered against perforation rusting on the body during the first 12 years
following delivery.
I f , h o w e v e r, t h i s t y p e o f d a m a g e s h o u l d o cc u r, i t w i l l b e r e p a i r e d f r e e o f ch a r g e
including parts and labour by any SEAT Tec hnical Service in Europe.
Warranty claims will not be accepted in t he following circumstances:•if damage is caused by external influence o r carelessness, or•if damage to the body is not repaired promptly and appropriately in
accordance with the manufacturer's instru ctions using genuine, approved
spare parts and materials, or•if perforation rusting is caused by the use o f non-genuine parts and mate-
rials for body repairs and if these repairs we re not carried out in accordance
with the manufacturer's instructions.
If the bodywork is repaired or painted, you r Technical Service will certify your
warranty against through-rusting for the repai red sections.Approved SEAT exchange partsThe approved SEAT exchange parts, conforming to the manufacturer’s
requirements, constitute an additional service at your disposal, offering you
the possibility to replace entire assemblie s, the most common being: the
lightened engine, gearboxes, cylinder head s, control units, electrical
elements, etc.
Of course these are Approved parts and, as they have the same class as the
manufacturer parts, they share the same S EAT approved spare parts warranty.
4)The warranty is not available for all export markets. For more information, ple ase ask
your Authorised SEAT Service Centre.5)As well as the legally required warran ty, SEAT offers an extended warranty to t heir cli-
ents in some European countries. The spe cific conditions of this extended warranty
are detailed in the vehicle sales con tract.
Prog Manto Ibizas-Alteas_EN.book Seite 16 Dienstag, 14. September 2010 11:40 11

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand, that
at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no rig ht at all
may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or omis-
sion, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the "Copyright" Act.
All rights on changes are reserved.
This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A. - Reprint: 15.09.10
Vehicle data
1.
2.
3.
4.
5.
1. Vehicle identification number
2. Identification numbers
Type/Model/Engine
Gearbox/Finishes
3. Identification letters
Engine/Gearbox/Paintwork
Equipment
4. Identification codes of variable equipment
5. Consumption (l/100 km) / CO
2Emissions (g/km) urban
Consumption (l/100 km) / CO
2Emissions (g/km) motorway
Consumption (l/100 km) / CO
2Emissions (g/km) mixed
N ote
• We recommend that you visit an Authorised SEAT Service Centre when-
ever you require any work done on your vehicle.
• SEAT regularly communicates to its Authorised Service Centres new
product developments. They have tools and highly specialized person-
nel who can guarantee the safety and performance of your vehicle.
• Scrupulously following the General Programme for Inspection
Services in Authorised SEAT Service Centres will ensure you maintain
greater value for your vehicle.
Portada PM_interior.qxd:Interior Manual TOLEDO 26/7/10 15:57 Página 3