ECO mode Seat Leon 5D 2010 Maintenance programme

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand, that
at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no rig ht at all
may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or omis-
sion, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the "Copyright" Act.
All rights on changes are reserved.
This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A. - Reprint: 15.09.10
Vehicle data
1.
2.
3.
4.
5.
1. Vehicle identification number
2. Identification numbers
Type/Model/Engine
Gearbox/Finishes
3. Identification letters
Engine/Gearbox/Paintwork
Equipment
4. Identification codes of variable equipment
5. Consumption (l/100 km) / CO
2Emissions (g/km) urban
Consumption (l/100 km) / CO
2Emissions (g/km) motorway
Consumption (l/100 km) / CO
2Emissions (g/km) mixed
N ote
• We recommend that you visit an Authorised SEAT Service Centre when-
ever you require any work done on your vehicle.
• SEAT regularly communicates to its Authorised Service Centres new
product developments. They have tools and highly specialized person-
nel who can guarantee the safety and performance of your vehicle.
• Scrupulously following the General Programme for Inspection
Services in Authorised SEAT Service Centres will ensure you maintain
greater value for your vehicle.
Portada PM_interior.qxd:Interior Manual TOLEDO 26/7/10 15:57 Página 3

Service information
6•If LongLife engine oil is not used, th e service dependent on time/distance
travelled then applies. In this case, an oil c hange service will have to be
carried out every 15,000 km (10,000 miles) or every year.Importance of the Maintenance ProgrammeThe Maintenance Programme confirms the date of deliv ery of
your vehicle and thus the beginning of its warranty cover.The vehicle data that appears in the Maintenance Programme guarantees
that the appropriate Genuine SEAT
® Parts are installed. This data helps
ensure that your car can be repaired without difficulty even after many years
of use.
The Maintenance Programme also informs you of which service should be
carried out when, and the work this entails.
Your Official SEAT Service will note down in this booklet the services carried
out.
Your Maintenance Programme should be kept in the vehicle with the on-
board documentation so that it is at han d whenever you need it.
Please remember to give the Maintenanc e Programme to the new owner if
you sell your car.
The SEAT Service Centre network is equ ipped with modern workshop tech-
nology and well-trained specialists. Many S EAT Service Centres offer different
service packages at special prices
Safety notesAll fluids and consumables , such as timing belts, tyres, coolant liquid, en gine
oil, spark plugs and vehicle batteries are cont inuously being developed.
Therefore, we recommend you take the veh icle to a qualified workshop to
have fluids or consumables changed. The Official SE AT Services receive
regular up-to-date information about mo difications. This is why SEAT recom-
mends you have fluids and other consumables replaced by an Official SEAT
Service.
Unless the vehicle is regularly and correctly s erviced as required in the
service plan, the vehicle could breakdown wh ile driving, leading to serious
accident and injury.•S e r v i c e s s h o u l d b e c a r r i e d o u t b y a q u a l i f i e d w o r k s h o p i n a c c o r d a n ce w i t h
the Maintenance Programme.•Please observe the instructions for use.Note
•Only use suitable fluids. Fluids should nev er be mixed up. This could
result in serious faults and engine dama ge.•SEAT is not responsible for damage to the v ehicle as a result of the use of
poor quality fuel, inadequate servicing o r non-availability of original spare
parts.•Spilt brake fluid may pollute the environme nt. If fluids leak or are spilt,
they should be collected and disposed of a ccordingly.•Regular servicing of your vehicle not only helps to ensure it remains in
good working order but also contributes to road safety. Therefore, we recom-
mend work is carried out in accordance with the Maintenance Programme.
Prog Manto Ibizas-Alteas_EN.book Seite 6 Dienstag, 14. September 2010 11:40 11

General Service Programme13
Every 2 years•Dust and pollen filter for the passenger com partment: Replace. (Only
models: Ibiza, Ibiza SC, Ibiza ST).After 3 years the first time, then every 2 years•Brake fluid: Replace.•Check the gas system (LPG). Only engines with LPG (engine code
CHGA).Every 3 years•Haldex clutch: Replace oil (four-wheel drive vehicles).Every 4 years•Dust and pollen filter for the passenger com partment: Replace. (Only
models: Altea, Altea XL, Altea Freetrack, Leo n)•Spark plugs : Replace (except 1.8 and 2.0 TFSI engines up to 147 kW).•Air filter: Clean casing and replace filter elemen t (only engines codes
CDLA and CDLD).
Every 6 years•Air filter element replaced and housing cleane d•Replace spark plugs.Note
•We recommend that you visit an Authorised SEAT Service Centre whenever
you require any work done on your vehicle.•SEAT keeps its Technical Services up-to-da te on new product develop-
ments. They have tools and highly specia lised personnel who can guarantee
the safety and performance of your vehicle.•Scrupulously following the General Programme for Inspection Services in
Authorised SEAT Services will ensure you m aintain greater value for your
vehicle.
Prog Manto Ibizas-Alteas_EN.book Seite 13 Dienstag, 14. September 2010 11:40 11

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand, that
at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no rig ht at all
may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or omis-
sion, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the "Copyright" Act.
All rights on changes are reserved.
This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A. - Reprint: 15.09.10
Vehicle data
1.
2.
3.
4.
5.
1. Vehicle identification number
2. Identification numbers
Type/Model/Engine
Gearbox/Finishes
3. Identification letters
Engine/Gearbox/Paintwork
Equipment
4. Identification codes of variable equipment
5. Consumption (l/100 km) / CO
2Emissions (g/km) urban
Consumption (l/100 km) / CO
2Emissions (g/km) motorway
Consumption (l/100 km) / CO
2Emissions (g/km) mixed
N ote
• We recommend that you visit an Authorised SEAT Service Centre when-
ever you require any work done on your vehicle.
• SEAT regularly communicates to its Authorised Service Centres new
product developments. They have tools and highly specialized person-
nel who can guarantee the safety and performance of your vehicle.
• Scrupulously following the General Programme for Inspection
Services in Authorised SEAT Service Centres will ensure you maintain
greater value for your vehicle.
Portada PM_interior.qxd:Interior Manual TOLEDO 26/7/10 15:57 Página 3