buttons Seat Leon SC 2017 Appendix Digital Cockpit

Instruments and control lampsService Menu
Various adjustments can be performed in the
Service menu depending on the equipment.
Open the Service menu
To open the Service menu, select the Oper-
ating range information profile (Infotain-
ment button  / 
> function button
Ve-
hicle > View > Driving data > Op‐
erating range ) and hold down the 
but-
ton of the multifunction steering wheel for
approx. 4 seconds. Now you can navigate the
menu with the multifunction steering wheel
buttons in the usual way.
Restart the service interval display
Select the Service
menu and follow the in-
structions given on the instrument panel dis-
play.
Restart the oil service Select the Restore Oil Service
menu
and follow the instructions given on the in-
strument panel display.
Restart driving data
Select the Reset Trip recorder
menu
and follow the instructions given on the in-
strument panel display.
Distinctive letters for engine (DLE)
Select the Distinctive letters for
engine menu. The distinctive letters for en-
gine will be displayed on the instrument pan-
el display.
Set time
Select the Time menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Driving data display (multifunction
display)
The driving data display (multifunction dis-
play) shows different driving data and con-
sumption values.
Switch displays
●
Turn the right thumbwheel of the multifunc-
tion steering wheel ›››
page 8 .
Change the memory
Press the 
button on the multifunction
steering wheel.
Since start memory
The memory will be deleted if the journey is
interrupted for more than 2 hours.
Since refuelling memory
Display and memory of the driving data and
consumption values collected. When refuel-
ling, the memory is erased.
Total calculation memory
This memory collects driving data up to a
maximum of 19 hours and 59 minutes or 99
hours and 59 minutes, or up to a maximum
of 1,999.9 km or 9,999.9 km. When one of
these maximum values is exceeded (it varies
depending on the version of the instrument
panel), the memory is erased.
Erase diriving data memories●
Select the memory that you wish to erase.
●
Press the  button of the multifunction
steering wheel for approx. 2 seconds.
Select the displays
The driving data to be displayed may be ad-
justed in the Infotainment System, in the ve-
hicle's settings menu.
Average consumption display
The average fuel consumption is displayed
after approx. 300 meters. »
5

Operating the instrument panel●Stop the vehicle, switch off the engine and
let it cool.●
Check the engine coolant level.
●
If the warning lamp does not go out even if
the coolant level is correct, seek professional
assistance.
Operating the instrument panel
Topic introduction
Some menu options can only be opened
when the vehicle is at a standstill.
WARNINGDistracting the driver in any way can lead to
an accident and cause injuries.●
Never use the menus on the instrument
panel display while driving.
NoteAfter charging or changing the 12-volt bat-
tery, check the system settings. In case of in-
terruption of the power supply, the system
settings may have changed or been deleted.Operation with the multifunction
steering wheelFig. 5
Right side of the multifunction steering
wheel: buttons to use the menus and infor-
mative displays of the instrument panel.
As long as there is a priority 1 warning
››› page 6
, no menu can be accessed. Some
warnings can be confirmed and hidden with
the 
button of the multifunction steering
wheel ››› Fig. 5
.
Select a menu or an informative display
●
Switch the ignition on.
●
If a message or vehicle symbol is dis-
played, press the 
››› Fig. 5
button; several
times if required.
●
To switch menus use the 
 or 
››› Fig. 5
buttons.
●
To open the menu or the informative dis-
play that appears, press the 
››› Fig. 5
but-
ton or wait a few seconds until the menu or
informative display opens automatically.
Adjust menu settings●
In the displayed menu, turn the right
thumbwheel of the multifunction steering
wheel ››› Fig. 5 until the desired menu option
is selected. The option is highlighted.
●
Press the 
››› Fig. 5 button for the desired
modifications. When the function or system
in question are highlighted, it means they
are enabled.
Return to menu selection
Press the button 

or 

››› Fig. 5
.
NoteIf, when the ignition is switched on, warnings
about existing faults are displayed, it is pos-
sible that adjustments cannot be performed
and information cannot be displayed as de-
scribed. In this case, go to a specialised
workshop and request the repair of the
faults.8