warning Seat Mii electric 2019 Owner's Guide

Instruments and warning/control lamps
successively for a few seconds and will
st
ay on until the f
ault is rectified.Driving data indicator (multifunc-
tion displ
ay)The display of the travel data (multifunction
displ
ay) sho

ws different values about the
journey and the consumption.
Change from one display to another

Instruments and warning/control lamps
Time
Hours and minut es of the instrument panel
cl
ock. The time can be displayed in 12 or 24
hour format. If necessary, an S appears at the
top of the display to indicate that the summer
time is set.
Units
Adjusting the temperature, consumption and
distance units.
Service
Checking service messages.
Factory settings
The default factory setting of some functions
are reset in the Settings menu.
Service intervals The inspection indication appears on the in-
strument panel displ
ay
›

›› Fig. 59
2 .
The dat es of the services (i.e
. the next Inspec-
tion Service or change of brake fluid) are de-
tailed on the sticker on the door pillar or in the
Maintenance Schedule.
The set service intervals have been specified
with the service dependent on time/dis-
tance travelled. Inspection reminder
If an inspection expir

es soon, an Inspection
reminder appears in the form of an abbrevia-
tion k and an indication in km appears when
the ignition is switched on. The number of kil-
ometres shown is the maximum number that
may be driven until the next service.
Service due
After the service date, an audible warning is
given when the ignition is switched on and the
abbreviation k will flash on the display for a few seconds.
Check the service date
With the ignition switched on, the engine off
and the vehicle stopped, the current service
can be checked:

Instruments and warning/control lamps

Opening and closing
Opening and closing Set of v ehicl
e keys
Vehicle key Fig. 63
Assignment of buttons on the remote
contr ol k

ey. Unlock the vehicle
L
ock the v

ehicle
Unlock only the rear lid. Press the button
until all the turn signals on the vehicle
flash briefly. You have 2 minutes to open
the rear lid. Once this time has passed, it
will lock again. In addition, the lamp on
the key flashes.
Folding the key shaft in and out
With the vehicle key the vehicle may be
locked or unlocked remotely ››› page 73.
1 2
3
4 The vehicle key includes an emitter and bat-
t
ery. The r

eceiver is in the interior of the vehi-
cle. The range of the vehicle key with remote
control and new battery is several metres
around the vehicle.
If it is not possible to open or close the vehicle
using the remote control key, this should be
re-synchronised ››› page 73 or the battery
changed ››› page 72.
Different keys belonging to the vehicle may
be used.
Control lamp on the vehicle key
When a button is pressed briefly on the vehi-
cle key, the control lamp flashes ››› Fig. 63
(arrow) once briefly, but if pressed for a long
period of time, it will flash several times, for
example, in the convenience opening.
If the vehicle key control lamp does not light
up when the button is pressed, replace the
key's battery ››› page 72.
Spare key
To obtain a spare key and other vehicle keys,
the vehicle chassis number is required.
Each new key contains a microchip which
must be coded with the data from the vehicle
electronic immobiliser. A vehicle key will not
work if it does not contain a microchip or the
microchip has not been encoded. This is also true for keys which are specially cut for the
vehicl
e.
The vehicle keys or new spare keys can be
obtained from a SEAT Official Service, a spe-
cialised workshop or an approved key service
qualified to create this kind of key.
New keys or spare keys must be synchronised
before use ››› page 73. WARNING

Lights
Headlight range control Fig. 82
Next to the steering wheel: regulator
headlight r ange contr
ol.The headlight range control
››

› Fig. 82
adapts according to the value of the light
beam of the headlight to the level of load of
the vehicle. This offers the driver optimum vis-
ibility and the headlights do not dazzle on-
coming drivers ››› .
The headlights can only be adjust ed when
the dipped beam is s

witched on.
To adjust, turn the control ››› Fig. 82: Value Vehicle load status
a)
 Two front occupants, luggage compart-
ment empt
y
 All seats occupied, luggage compart

-
ment empt y Value Vehicle load status
a)
 All seats occupied, luggage compart-
ment full
.
 Driv

er only, luggage compartment full a)
If the vehicle load does not correspond to those
sho wn in the t

able, it is possible to select intermediary
positions. WARNING
Heavy objects in the vehicle may mean
that the headlights dazzl e and distr

act oth-
er drivers. This could result in a serious ac-
cident.

Visibility
More the lever to the required position:
4 v
Short wipe. Brief press, short clean.
Hol
d the l
ever down for more time to in-
crease the wipe frequency.
5 W
Windscreen washer. The windscreen
washer function is activ

ated by push-
ing the lever towards the steering
wheel, and the wipers operate simulta-
neously.
6 
Interval wipe for rear window. The wip-
er will wipe the windo
w appr

oximately
every six seconds.
7 \
The rear window wash function is acti-
v
at

ed by pressing the lever, and the
rear wiper starts simultaneously. WARNING
In cold conditions you should not use the
w ash/wipe syst

em unless you have
warmed the windscreen with the heating
and ventilation system. The windscreen
washer fluid could otherwise freeze on the
windscreen and obscure your view of the
road. CAUTION
If the ignition is switched off with the wind-
scr een wipers activ

e, they complete their
wipe before returning to the rest position.
When switching the ignition back on, the
windscreen wiper will continue to operate
at the same wiping level. Ice, snow and oth- er obstacles on the windscreen may dam-
age the wiper and the windscr
een wiper
mot

or.

Seats and head restraints
may occur. Never cover the uncoated sur-
f
ace on the int
erior or exterior. Seats and head restraints
Adjusting seats Manual adjustment of the fr ont
seats Fig. 92
Front seats: manual seat adjustment. Forwards/backwards: pull the lever and
mo
v

e the seat. The seat must engage
when the lever is released!
Raise/lower: pull the lever up or push
down (several times if necessary) from its
home position.
Reclining the backrest: press the lever
and adjust the backrest inclination at the
same time. The seat backrest must be en-
gaged.
1 2
3 WARNING
Incorrect seat adjustment may lead to ac-
cidents and se v

ere injuries.

Operation
head and under no circumstances below eye
l e
vel. Keep the back of your head always as
close to the head restraint as possible.
Adjusting the head restraint for short peo-
ple
Lower the head restraint completely, even if
your head is below its upper edge. In the low-
est position, there may be a small distance
between the head restraint and the backrest.
Adjusting the head restraint for tall people
Push the head restraint up as far as it will go. WARNING
If travelling with the head restraints re-
mo v

ed or improperly adjusted, the risk of
severe or fatal injuries in the event of acci-
dents and sudden braking or manoeuvres
increases.

Transport and practical equipment
WARNING

Transport and practical equipment
WARNING
If unsuitable or damaged belts or retaining
str aps ar
e used, they could break in the
event of braking or an accident. Objects
could then be launched across the passen-
ger compartment and cause serious or fa-
tal injuries.