eco Seat Tarraco 2020 User Guide

Transporting children safely
Vehicle ISOFIX positions Weight group
Size
cl ass a) El
ectrical
equipment Front passenger seat
Second row of seats:
Third row of
seats b)
airbag enabled airbag disabled side centre
Group 0 to 10 kg E ISO/R1X ILILXX
Group 0+ to 13 kg E
ISO/R1 X ILILXX
D ISO/R2 X ILILXX
C ISO/R3 X ILILXX
Group I 9 to 18 kg D
ISO/R2 X ILILXX
C ISO/R3 X ILILXX
B ISO/F2 X IL, IUFIL, IUFXX
B1 ISO/F2X XIL, IUFIL, IUFXX
A ISO/F3 XIL, IUFIL, IUFXX
Group II 15 to 25 kg --- ---X ILILXX
Group III 22 to 36 kg --- ---X ILILXX
IUF: Suitable for forward-facing ISOFIX universal child restraint systems approved for use in this weight group.
IL : It is suit

able for certain ISOFIX child restraint systems (CRS) that can be for the specific vehicle, restricted or semi-universal categories. Take the child seat manufacturer

Safety
Vehicle i-Size positions Front passenger seat
Second row of seats:
Third row of seatsa)
airbag enabled airbag disabled sidecentre
X i-U i-U XX
i-U: Position suitable for forward- or rear-facing i-Size child restraint systems with universal certification.
X : P
osition not suitable for i-Size child restraint systems. a)
Third row not available for all versions.
Securing the child seat with the “ISOFIX/i-
Siz e” syst

em
You must follow the child seat manufacturer's
instructions.

Transporting children safely
Top Tether* securing belts Fig. 28
Side seats of the second row: adjust-
ment and assembly accor ding t
o the Top Tether
belt. Fig. 29
Front passenger seat: adjustment and
assembly accor ding t

o the Top Tether belt. Child seats with the Top Tether system come
with a str
ap f

or securing the seat to the vehi-
cle anchor point and provide greater re-
straint.
The objective of this strap is to reduce for-
ward movements of the child seat in a crash,
to reduce the risk of injuries to the head from
hitting the inside of the vehicle. Using the Top Tether in rear-facing moun-
ted seats
Curr

ently, there are very few rear-facing child
safety seats that have Top Tether. Please
carefully read and follow the seat manufac-
turer instructions to learn the proper way to
install the Top Tether strap.
Securing the retainer strap

Operation

v Tr
avel Assist On/Off ››› page 264

v Side Assist On/Off ››› page 268

v Navigation.

v Audio.

v Telephone.

v Vehicle status. ››› page 73
Service Menu In the Service menu various settings can be
adjust
ed depending on the f

eatures.
Open the Service menu
To open up the Service menu, select the
Range information profile while in the Driv-
ing data menu, and keep the  key press-
ed on the multifunction st eering wheel f

or ap-
proximately 4 seconds. When it is released,
the Service menu will be displayed. Now
you can browse through the menu using the
keys on the multifunction steering wheel as
usual.
Restart the service interval display
Select the Service menu and follow the in-
structions on the screen of the instrument
panel. Restart the oil service
Select the
Restore Oil service menu and
f

ollow the instructions on the instrument pan-
el display.
Restart journey data
Select the Reset trip menu and follow the
instructions on the instrument panel display
to reset the value.
Identifying letters on engine (LDM)
Select the menu Engine code . The identify-
ing letters of the engine will be shown on the
instrument cluster display at the bottom left.
Setting the clock
Select the Time menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Driving data indicator (multifunc-
tion display) The display of the travel data (multifunction
displ
ay) sho

ws different values about the
journey and the consumption. Change from one display to another

Operation
eliminate the cause. If necessary, seek pro-
f essional assist
ance.
Priority 2 warning (yellow)
The symbol lights up or flashes (in part ac-
companied by audible warnings). Operating
faults or the lack of operating fluids can
cause damage to the vehicle or a fault.
Check the faulty function as soon as possible.
If necessary, seek professional assistance.
Information message
It provides information about processes in the
vehicle.
Driver alert system (break recom-
mendation)* Fig. 56
On the instrument panel display: driver
al ert syst

em symbol. The Fatigue detection informs the driver when
their driving behaviour sho
ws signs of f

atigue.
Function and operation
Fatigue detection determines the driving be-
haviour of the driver when starting a journey,
making a calculation of tiredness. This is con-
stantly compared with the current driving be-
haviour. If the system detects that the driver is
tired, an audible warning is given with a
sound and an optic warning is shown with a
symbol and complementary message on the
instrument panel display ››› Fig. 56
. The mes-
sage on the instrument panel display is
shown for approximately 5 seconds, and de-
pending on the case, is repeated. The system
stores the last message displayed.
The message on the instrument panel display
can be switched off by pressing the  button
on the multi-function steering wheel
››› page 82.
The message can be recalled to the instru-
ment panel display using the multifunction
display ››› page 72
.
Conditions of operation
Driving behaviour is only calculated on
speeds above about 65 km/h (40 mph) up to
around 200 km/h (125 mph). Switching on and off
Fatigue det
ection can be activated or deacti-
vated in the infotainment system using the
function button  > Driver assistance >
Driver Alert System ››› page 90
. A mark in-
dicates that the adjustment has been activa-
ted.
System limitations
The Fatigue detection has certain limitations
inherent to the system. The following condi-
tions can limit the Fatigue detection or pre-
vent it from functioning.

Instruments and warning/control lamps
Charge: Char ging z
one. Indicates the
amount of charge generated and the
maximum charge.
Power %: Electric traction zone. Indi-
cates the percentage of power used and
the maximum amount of power currently
available.
The power meter shows the usage level of
the electric drive. The power meter bar shows
the current usage level.
A finer coloured border indicates how much
the propulsion can currently be used. De-
pending on the selected driving program and
the current availability of electrical power,
the boundaries of the different colours can
vary.
The following displays can be seen on the
Power meter:
››› Fig. 58
The vehicle recovers electrical energy
Electric drive switched on / Boost (the ve-
hicle runs for a short time at the maximum
power of the electric motor and combus-
tion engine).
The combustion engine must be running.
Green
Blue
A B
C Battery level indicator
 V
alid for: hybrid vehicles Fig. 59
Instrument panel: battery level indica-
t or

. The small arrow next to the battery symbol
indicat
es which side of the v

ehicle the charg-
ing cover is on. Note

Operation
Assist systems and vehicle settings Fig. 68
Schematic representation: Assist systems
and v ehicl
e settings The number of assist systems and settings
depend on the v
ersion and the country in
question.

v Driv

er assistance

v Automatic parking brake activation
››› page 275.

v Park assist ››› page 282
.

v Activate / deactivate ESC, stabilisation
systems and brake assist ››› page 278
.

v Activate / deactivate the Start-Stop sys-
tem ››› page 222
.

v Adaptive cruise control (ACC)
››› page 254.

v Lane Assist (lane keeping system)
››› page 262.
v
Emergency br ake assistance system
(Front Assist) ››› page 251
.

v Fatigue detection ››› page 74
.

v Traffic sign recognition ››› page 75
.

v Lane assist ››› page 268
.

v Emergency Assist ››› page 267
.90

Operation
If the driver’s door is unlocked mechanically
using the k ey, the ignition must be t
urned on
within 15 seconds of opening the door.
Otherwise, the alarm will trigger for 30 sec.
and the ignition will be blocked. CAUTION
If the anti-theft security system is switched
off , the v

ehicle interior monitoring and the
tow-away protection are automatically
disconnected. Note

Lights
Several warning and control lamps light up
f or a f
ew seconds when the ignition is switch-
ed on, signalling that the function is being
verified. They will switch off after a few sec-
onds. WARNING
Observe the safety warnings ››

› in Con-
tr ol and w
arning lamps on page 85. Headlight switch
Fig. 92
Dash panel: lights control.

Air conditioning
and colourless toxic gas. Carbon monoxide
can cause peopl
e t
o lose consciousness. It
can also cause death. Radio-operated remote control
Fig. 152
Auxiliary heating: radio-operated re-
mot e contr

ol. Switch on: Pr
ess the butt

on for about
one second
Switch off: Press the button for about
one second
If the buttons of the remote control are press-
ed unnecessarily, it could switch on the auxili-
ary heater involuntarily, even when it is out of
range or when the control lamp is flashing. 
 Remote control LED
When the buttons ar

e pressed, the LED of re-
mote control ››› Fig. 152
2 gives the user a
r ange of inf

ormation:
It lights up for approx. 2 seconds