eco Seat Tarraco 2020 Service Manual

Towing bracket device*
Retrofitting a towing bracket Description Fig. 221
Limits and attachment points for ret-
r ofitting a t
owing bracket. SEAT recommends that towing brackets be
r
etr

ofitted at a specialised workshop. For ex- ample, it may very well be necessary to ad-
just the cooling system or mount thermal pr

o-
tection plates. SEAT recommends visiting a
SEAT dealership for this.
If a towing bracket is retrofitted, the distance
specifications should always be kept in mind.
The distance between the centre of the ball
head and the road ››› Fig. 221
D must never
be l ess than indicat

ed. This also applies when
the vehicle is fully loaded, including the tech-
nically permissible maximum vertical load on
the coupling device.
Distance specifications ››› Fig. 221
:
Mounting points on the vehicle
1,095 mm
75 mm (minimum)
365 mm
353 mm
600 mm
1,050 mm WARNING
If the cables are improperly or incorrectly
connect ed, this may l

ead to malfunctions
in the entire vehicle electronic system, as
well as to accidents and serious injuries.

Practical tips
Incorrect handling of the high-voltage
batt ery can cause serious injuries or
death. Maint
enance work on the high-
voltage battery must only be performed
by specialized personnel with the corre-
sponding qualifications and training. Nev-
er modify the high-voltage battery. When
the high-voltage battery is open, ensure it
does not come into contact with water or
other liquids. Liquids may cause short cir-
cuits, electrical shocks and burns.
Conservation of the high-
volt
age battery
Conservation instructions  V
alid f
or: hybrid vehicles
Reliability and capacity of the high-volt-
age battery
Lithium ion batteries are subject to ageing
and wear and tear throughout their useful life
due to their physical and chemical charac-
teristics. Correct handling of the high-voltage
battery makes an essential contribution to
keeping it in a reliable state in the long term
and to achieving high battery capacity and
range. Therefore, it is extremely important to
respect the following conservation instruc-
tions for the high voltage battery. These 7 maintenance instructions are essential for
maint
aining the v

ehicle's value over time.
Please also observe the applicable SEAT
warranty conditions for the high-voltage bat-
tery.
Conservation instructions
SEAT recommends the following conserva-
tion instructions:

Checking and refilling levels
at least 30 seconds before starting the en-
gine
. When you then st
art the engine it may
take longer than normal (up to one minute)
to start firing. For the sake of the environment
Do not overfill the fuel tank, it may cause
the fuel t o o

verflow if it becomes warm. Note
There is no emergency mechanism for the
manual r el

ease of the fuel tank flap. If nec-
essary, request assistance from special-
ised personnel. Note
Diesel vehicles are fitted with a protective
de vice that pr

events the insertion of the
wrong fuel hose 1)
. It is only possible to re-
fuel with Diesel nozzles.

Practical tips
Super unleaded petrol 95 octane petrol or
normal 91 oct ane petr
ol at least
We recommend refuelling with super 95 oc-
tane petrol (91 AKI). If not available, normal 91
octane petrol (87 AKI) (with a slight power
loss) may be used.
Super unleaded petrol, 95 octanes at
least
You should use super 95 octane petrol (91
AKI) at least.
If super is not available, if necessary, use nor-
mal 91 octane petrol (87 AKI). In this case only
use moderate engine speeds and a light
throttle. Refuel with super as soon as possi-
ble.
Unleaded super plus 98 octane petrol or
super 95 octane petrol at least
We recommend refuelling with super plus 98
octane petrol (93 AKI). If not available: super
95 octane petrol (91 AKI) (with a slight power
loss).
If super is not available, if necessary, use nor-
mal 91 octane petrol (87 AKI). In this case only
use moderate engine speeds and a light
throttle. Refuel with super as soon as possi-
ble. CAUTION

Checking and refilling levels
Diesel  V
alid for: vehicles with diesel engines
Pl ease note the information on the inside of
the fuel tank flap.
We recommend you use Diesel according to
standard EN 590.
The diesel can thicken at very low tempera-
tures, thus affecting the start or operation of
the engine. Ask your service station attendant
if their diesel is suitable for winter use.
Water in the fuel filter 1)
If your vehicle has a diesel engine and is
equipped with a fuel filter with a water sep-
arator, the instrument panel may display the
following warning:

Checking and refilling levels
We recommend that the oil change be done
by a t echnical service or specialised w
ork-
shop.
If the engine oil level is too low
You can get information about the correct en-
gine oil for your vehicle at your workshop.
If the recommended engine oil is not availa-
ble, in the event of an emergency you can
change the oil once with a maximum of 0.5 L
of the next oil until the next oil change:
Petrol engines: standard VW 504 00,
VW 502 00, VW 508 00, ACEA C3 or
API SN.
Diesel engines: standard VW 507 00,
VW 505 01, ACEA C3 or API CK-4.
Have the oil changed by a specialised work-
shop.
SEAT recommends using original SEAT oil to
guarantee high SEAT engine performance.
Engine oil additives
No type of additive should be mixed with the
engine oil. The deterioration caused by these
additives is not covered by the warranty. CAUTION
Take the following into account if you have
r efill

ed with an engine oil different to those –
– specified in the aforementioned standards,
or by your SEAT t
echnical service centr

e:

Checking and refilling levels
The position of the oil filler opening is shown
in the corr esponding engine compartment il
-
lustration ››› page 340
.
Engine oil specification ››› page 340
. WARNING
Oil is highly inflammable! Ensure that no oil
comes int o cont

act with hot engine compo-
nents when topping up. CAUTION
If the oil level is above area ››

› Fig. 241
A ,
do not st ar
t the engine. This could result in
damage to the engine and catalytic con-
verter. Contact a specialised workshop. For the sake of the environment
The oil level must never be above zone
› ›

› Fig. 241
A . Otherwise oil can be drawn in
thr ough the cr
ankcase breather and leak
into the atmosphere via the exhaust sys-
tem. Note
Before a long trip, we recommend finding
an engine oil that conf orms t

o the corre-
sponding VW specifications and recom-
mend keeping it in the vehicle. This way, the
correct engine oil will always be available
for a top-up if needed. Engine oil change
We recommend that you have the engine oil
changed by a T
echnical Service

. WARNING
Only change the engine oil yourself if you
hav e the specialist kno

wledge required!

Practical tips
Brake fluid Check and r efill the br
ake fluidFig. 246
Engine compartment: brake fluid res-
erv oir cap

. The brake fluid reservoir is located in the en-
gine compartment
››

› page 340
.
Checking the brake fluid level
The brake fluid level must be between the 
and  markings.
However, if the brake fluid level goes down
noticeably in a short time, or drops below the mark, there may be a leak in the brake system. Seek specialist assistance. A warning
light on the instrument panel display monitors
the brake fluid level ››› page 84
.
In right-hand drive vehicles the brake fluid
reservoir is on the other side of the engine
compartment. Changing brake fluid
We r

ecommend that you have the brake fluid
changed by a Technical Service. WARNING
If the brake fluid level is low or unsuita-
bl e/ol

d brake fluid is used, the brake sys-
tem may fail or braking power may be re-
duced.

Checking and refilling levels
Charging the battery
The v ehicl
e battery should be charged by a
specialised workshop only, as batteries using
special technology have been installed and
they must be charged in a controlled environ-
ment.
Replacing a vehicle battery
The 12-volt vehicle battery has been de-
signed to suit its location and has special
safety features. If you need to change the
battery, please go to a service centre before
buying a new one to get information about
the electromagnetic compatibility, size and
maintenance requirements, performance and
safety of your vehicle’s new battery. SEAT
recommends you have the battery replaced
by a technical service.
Start-Stop systems ( ››› page 223
) are equip-
ped with a special battery. Therefore, it must
only be replaced with a battery of the same
specifications.
Your vehicle is equipped with an intelligent
power management system to control the
distribution of electrical energy ››› page 351
.
The power management function ensures
that the battery is charged much more effi-
ciently than on vehicles without a power
management system. To maintain this func-
tion after replacing the battery, we recom-
mend that the replacement battery used is of
the same make and type as the original fitted battery. To make proper use of the power
management function after the batt
ery has
been changed, have the battery coded to the
power management mode at a specialised
workshop. WARNING

Maintenance
Maintenance
SEAT Maint enance Pr
o-
gramme
Service intervals
Service work and the Digital Main-
tenance Plan Log of services performed (“Digital Main-
t
enance Pl

an”)
The SEAT dealership or a specialised work-
shop records Service receipts in a central
system. Thanks to this comprehensive docu-
mentation of the service history, it is possible
to reproduce the services performed any
time. SEAT recommends requesting a Service
receipt after every service carried out con-
taining all the services carried out on the sys-
tem.
Whenever there is a new service the receipt is
replaced with a current one.
The Digital Maintenance Plan is not avail-
able in some markets. In this case, your
SEAT dealer will inform you about the cur-
rent documentation of the work. Service works
In the Digital Maint

enance Plan, your SEAT
authorised service or specialised workshop
documents the following information: