instrument panel Seat Tarraco 2020 User Guide

Operation
Opening and closing the rear lid Fig. 83
Rear lid: handle The rear lid opening system operates electri-
cally. It is activ
at
ed by exerting slight pressure
on the handle ››› Fig. 83
.
To lock or unlock the rear lid, press the d or
 buttons of the vehicle key.
A warning appears on the instrument panel
display if the rear lid is open or not properly
closed.* An audible warning is also given if it
is opened while the vehicle is moving faster
than 6 km/h (4 mph)*.
Opening and closing

Lights
Turn signal and main beam lever Fig. 94
Turn signal and main beam lever. More the lever to the required position:
Right t urn light or right
-hand parking light
(ignition switched off).
Left turn light or left-hand parking light
(ignition switched off).
Turning main beam headlights on: control
lamp  lit up on the instrument panel.
The headlight flasher comes on while we
pull the lever. Control lamp  lit up.
Place the lever in rest position to turn off the
corresponding function.
Convenience turn signals
When the ignition is switched on, move the
lever as far as possible upwards or down-
wards and release the lever. The turn signal
will flash three times. 1 2
3
4 The convenience turn signals are switched on
and off in the inf
ot

ainment system by means
of the function button  ! SETTINGS ! Light ! Light Assist ! Convenience
turn signals
››› page 90
.
In vehicles that do not have the correspond-
ing menu, this function can be deactivated in
a specialised workshop.
Parking light 
The parking lights will only work with the igni-
tion off. If said light is on, an audible warning
will sound while the driver door is open.

Infotainment system

v Touch oper
ation via the device screen, ro-
tary push-button, menu button and buttons
on the multifunction steering wheel.
Central computer with control and display
unit (9,2”) 1)
The factory-mounted central computer in the
vehicle includes country-specific compo-
nents and software for connectivity and for
the execution of vehicle, comfort and infotain-
ment functions.
The corresponding indications are shown on
the control and display unit screen and partly
on the instrument panel.

v Capacitive colour screen:

v Using the equipment with:

v Touch zones Touch operation.

v Buttons on the multifunction steering
wheel.

v Approach sensors (driver and passenger
side recognition, gesture control).
Vehicle and comfort functions
v Driver assistance system settings.

v Heating and air conditioning settings.

v Lights and visibility function settings.

v Vehicle comfort settings.

v Parking and manoeuvring settings. Sound system Basic equipment:
The inf
ot

ainment system that is supplied from
the factory is equipped as follows:

v Speakers in different locations and with dif-
ferent power levels (watts).

v Internal amplifier depending on the system:

v 8 speakers: 5 x 20 W

v Setting options:

v Equaliser, depending on the system:

v 8 speakers: 5 frequency bands or pre-
defined settings.

v Sound distribution, depending on the sys-
tem:

v8 speakers: Balance + Fader (left /
right / front / rear).

v Sound optimisation by zones (valid for 8
speaker system):

v Manual (Driver and All)

v Automatic depending on the seats oc-
cupied.
Optional sound system
The infotainment system can be extended
with an optional sound system as follows:
v 10 speakers in different locations and with
different power levels (watts).
v
Ext ernal amplifier (340 W Ethernet), which
pr

ocesses the audio signals sent by the
central computer.

v Excitation of speaker channels through
class AB final stages.

v Audio signal processing in digital internal
signal processor (DSP).

v Independent subwoofer in the luggage
compartment.

v Setting options:

v User equaliser: 5 bands.

v Sound distribution: Balance + Fader (left /
right / front / rear).

v Sound optimisation by zones:

vManual (Driver, Front and All)

v Subwoofer volume.
Connectivity Wi-Fi

v Wi-Fi conf orming t

o IEEE 802.11 b/g/n.

v Transfer in 2.4 GHz and 5 GHz.

v Three Wi-Fi modes at the same time:

v Tethering (2.4 GHz).

v 2.4 GHz access point.

v Connect System: 1)
Equipment name: Connect System.
180

Start and driving
sportier, more direct and noticeably more dy-
namic driving sensation.
St eering assist
This help assists the driv
er in critical situa-
tions. It recommends turning the steering
wheel to perform a corrective manoeuvre
(counter-steering), turning slightly to avoid
skidding ››› .
WARNING
Steering assist helps the driver in critical
sit uations. The driv

er is the person who has
to control the vehicle's steering at all times. Control lamp
v
It lights up red
Faulty steering.
Do not continue driving, st op the v

ehicle as soon as
possible and in a safe manner.
Take the vehicle to a specialised workshop and have
the fault repaired as soon as possible. v
It lights up yellow
Limited steering operation.
Driv e car

efully to a specialised workshop to have the
steering checked.
If the warning light does not come on again after re-
starting the engine and driving a short distance, it is
not necessary to check the steering.
OR: The 12-v olt batt
ery was disconnected and re-
connected.
Drive a short distance at 15-20 km / h (9-12 mph). v
It flashes yellow
The steering column is jammed.
When st opped, t

urn the steering wheel in both direc-
tions.
OR: The st eering column does not unlock or lock.
T
urn off the ignition and turn it on again. Consider the
messages shown on the instrument panel display.
Do not continue driving if the steering column re-
mains locked after switching on the ignition. Seek
specialist assistance. The control lamp should light up for a few
seconds when the ignition is s
wit

ched on. It
should go out once the engine is started. WARNING
Never ignore the warning lamps or messag-
es.

Driving
Switching between the speed limiter and
GRA or ACC (whil e the speed limit
er is
connected)
To change between the driving assistance
systems, press button t ››› Fig. 181
2 , then
sel ect with the right thumb

wheel on the multi-
function steering wheel in the instrument
panel menu and press the thumbwheel to
confirm your selection.
It switches between the speed limiter and
cruise control (GRA) or the adaptive cruise
control (ACC).
Going down slopes with the speed limiter
If the programmed speed is exceeded while
driving downhill, after a short time the control
warning lamp

Driving
travelling in the same lane and direction. It
may not activ at
e in other hazard situations
››› .
Fr ont Assist is enabl

ed between 4 km/h (2.5
mph) and 250 km/h (156 mph). Depending
on a range of conditions, some of the func-
tions described below are omitted to optimize
the behaviour of the system.
Front Assist is a driving assistance function
that can never replace the driver’s atten-
tion.
Safety distance warning
If the system detects that you are driving too
close to the vehicle in front, it will warn the
driver with this indication on the instrument
panel display

Driving
Indications on the instrument panel
displ ay Fig. 191
On the instrument panel display: indi-
cation with activ e adjustment.Fig. 192
On the instrument panel display: con-
tr ol l
amps. Displays on the screen
› ›

› Fig. 191
The adaptive lane guidance function is
active.
1 Distance set.
In addition, depending on the equipment,
contr ol l

amps indicate the status of the sys-
tem on the instrument panel display:
››› Fig. 192
Travel Assist active, adaptive cruise con-
trol and adaptive lane guidance function
are active.
Travel Assist active, adaptive cruise con-
trol active and adaptive lane guidance
function passive.
Travel Assist active, adaptive cruise con-
trol passive and adaptive lane guidance
function active.
Travel Assist active, adaptive cruise con-
trol and adaptive lane guidance function
are passive.
Inactive Travel Assist.
Depending on the equipment, more details
may be displayed on the instrument cluster,
such as dashed lines or other vehicles on the
road. 2 A
B
C
D
E Operating Travel Assist
Fig. 193
Left side of the multifunction steering
wheel : butt

ons for operating Travel Assist. Connecting

Help with parking and manoeuvring
way, the system will require fewer manoeu-
vr es t
o complete the parking action.
Trailer mode
The Park Assist system cannot be switched
on if the factory-fitted towing bracket
››› page 306 is electrically connected to a
trailer.
After changing a wheel
If, after changing a wheel, the vehicle stops
entering and exiting parking spaces correct-
ly, the circumference of the new wheel may
be different and the system may need to
adapt to it. The adaptation is automatic and
takes place during driving. Making turns slow-
ly and in both directions (20 km/h [12 mph])
for a few minutes may contribute to this
adaptation process ››› in Introduction on
page 282. Selecting a parking mode Fig. 202
On the instrument panel display:
vie w of the parking assist syst

em with reduced
view. Fig. 203
On the instrument panel display: in-
dication of parking modes. Parking assist has the following 3 parking
modes:Reverse parallel parking.
R
e

verse angle parking.
Forward angle parking.
Selecting a parking mode after passing in
front of the space
After activating the Park Assist system and af-
ter detecting a parking space, the display on
the instrument panel proposes a parking
mode. The Park Assist system selects the
parking mode automatically. The selected
mode is shown on the instrument panel dis-
play ››› Fig. 202
. The reduced display of oth-
er possible parking modes is also shown
››› Fig. 203. If the mode selected by the sys-
tem does not correspond to the desired
mode, you can select another mode by
pressing the

Help with parking and manoeuvring
Parking with the parking assist system Fig. 204
On the instrument panel display: paral-
l el parking.  Finding a parking space
.  Park-
ing position.  Manoeuvring. Fig. 205
On the instrument panel display: angle
parking.  Finding a parking space .  P

arking
position.  Manoeuvring. Message to move forwards
Y
our v

ehicle
Parking space detected
Message to park
Message to press the brake pedal
Progress bar
1 2
3
4
5
6 The necessary conditions have to be met to
park with P
ark Assist
›
›› page 284
and the
parking mode must be selected ››› page 285
.
Parking

Help with parking and manoeuvring
Determine the length of the trailer's draw-
bar
In or der f
or the trailer manoeuvre assistant to
determine the length of the trailer’s drawbar,
drive the vehicle-trailer set through some
turning manoeuvres or curves. The more pre-
cisely the length of the drawbar is deter-
mined, the wider the angles that will be avail-
able when manoeuvring. The assistant subdi-
vides the maximum available end stops of the
angle indicator into four levels: approx. 30°,
45°, 60° and 75°. Note
For technical reasons, the trailer manoeu-
vr e assist

ant cannot always correctly de-
tect trailers with LED technology taillights. Operating
Fig. 212
Rotary exterior mirror controls.: adjust
the tr ail

er angle. Fig. 213
Instrument panel display: engage re-
v erse gear Key of the Fig. 2
12

,
››› Fig. 213
:
Rotary exterior mirror controls.
Trailer orientation to the left
Trailer orientation to the right
Move the vehicle in the direction of the
towing device.
Actual trailer position
Target trailer position
Angle indicator zero position
Manoeuvre with the tow vehicle and trailer
set
The system requirements must be met
››› page 296.