LED SEAT TOLEDO 2019 User Guide
[x] Cancel search | Manufacturer: SEAT, Model Year: 2019, Model line: TOLEDO, Model: SEAT TOLEDO 2019Pages: 300, PDF Size: 6.88 MB
Page 128 of 300
Operation
When a car that is manufactured in a country
that driv es on the right tr
av
els to a country
that drives on the left (or vice versa), it is nor-
mally necessary to cover part of the head-
light bulbs with stickers or to change the ad-
justment of the headlights to avoid dazzling
other drivers.
In such cases, the regulations specify certain
light values that must be complied with for
designated points of the light distribution. This
is known as “Tourist light”.
The light distribution of the halogen and full-
LED headlights allows the specific “tourist
light” values to be met without the need for
stickers or changes in the settings. Note
“Tourist light” is only allowed temporarily. If
you are pl anning a l
ong stay in a country
that drives on the other side, you should
take the vehicle to an Authorised Technical
Service to change the headlights. Interior lights
Int erior lighting Fig. 134
Interior lighting
Page 165 of 300
Connectivity
Function button: function
F I N I S H Once one or more settings have been
applied, click on this in the main menu
of the wizar
d t
o confirm and finalize
the settings.
If there are any parameters you have
not set, the next time you connect the
Infotainment system, the Initial Config-
uration Wizard will start up. a)
Only valid for Navi System. Connectivity
Dat a tr
ansf
er This communication can allow data to be
read and/or writt
en.
Fr
om the SETTINGS menu > D a t a t r a n s f e r
f o r S E A T a p p s , there is a checkbox to acti-
vate/deactivate the function and a dropdown
menu called O p e r a t i o n v i a a p p s which
controls the level of interaction between the
apps and the system.
Full Link* Full Link technol ogy description Fig. 179
Related video The Full Link system provides a way of bring-
ing t
ogether t
echnol
ogies that allow commu-
nication between the Infotainment System
and mobile devices:
Page 185 of 300
Operating modes
Destination.
... Estimated time of arrival at destina-
tion.
... Calculated distance to destination.
... Travelling time.
* ... Distance to the next stopover.
Press on the destination to display the function
butt ons.
Del
et
e destination.
To start guidance direct to the selec-
ted destination. Destinations that
come bef
or
e the selected destination
are ignored.
To open the detailed view of the desti-
nation in question.
Available function buttons.
New dest. To add a new destination to the tour.
Destina-
tions To add a new destination from M y
d e s t i n a t i o n s to the tour
.
Storing To store the created tour in the tour
memory.
Start To start route guidance.
Calculate To update calculated distance and es-
timated arrival time
.a) Stop
To stop route guidance to the active
destination.b)
c To move a stopover or a destination to
another position on the list. Press and
dr ag t
o move the destination. a)
This function button is only displayed with route
guidance activat ed and when a destination has been
added t
o the tour.
b) This function button is only displayed with route
guidance activated.
L
ast destinations
View of destinations for which a route has al-
ready been started.
My destinations
Page 205 of 300
Start and driving
If the control lamp ! fl ashes, the ASR is w
ork -
ing.
If the ! warning lamp illuminates on ignition, the TCS system may have switched off due to
technical reasons. Turn off the ignition and
turn it on again. Upon switching on the igni-
tion again, if the warning lamp has switched
off, this means the TCS is functioning correct-
ly again.
If the ! warning lamp remains illuminated,
there is a fault in the TCS.
The informative display indicates:
F a u l t : t r a c t i o n c o n t r o l s y s t e m
( A S R )
Go to a technical service.
Electronic differential lock If one of the wheels starts to skid, the EDL
br
ak
es that wheel, tr
ansmitting the driving
force to the other wheels. This increases vehi-
cle stability and improves driving stability.
To prevent the disc brake of the braking
wheel from overheating, the EDL cuts out au-
tomatically if subjected to excessive loads.
The vehicle will continue to function normally
without EDL. The EDL will switch on again au-
tomatically when the brake has cooled down. Manual gearbox
Changing gears Fig. 215
Gear shift diagram of a 5- or 6-speed
manual gearbo x Read the additional information carefully
Page 210 of 300
Driving
G e a r b o x : S y s t e m f a u l t ! Y o u m a y
c o n t i n u e d r i v i n g .
Hav e the f
ault corrected by a specialised
workshop without delay.
G e a r b o x : S y s t e m f a u l t ! Y o u c a n
c o n t i n u e d r i v i n g w i t h r e s t r i c -
t i o n s . R e v e r s e g e a r d i s a b l e d
Take the vehicle to a specialised workshop
and have the fault repaired without delay. G e a r b o x : S y s t e m f a u l t ! Y o u c a n
c o n t i n u e d r i v i n g i n D u n t i l
s w i t c h i n g o f f t h e e n g i n e
Stop the vehicle in a safe place well away
from moving traffic. Seek specialist assis-
tance. G e a r b o x : t o o h o t . A d a p t y o u r
d r i v i n g a c c o r d i n g l y
Continue driving at moderate speeds. When
the warning lamp switches off, you can con-
tinue driving in a normal manner. G e a r b o x : p r e s s t h e b r a k e a n d e n -
g a g e a g e a r a g a i n .
If the fault was caused by a gearbox with a
high temperature, this driver message will be
displayed when the gearbox has cooled
again. Gear-change indicator
Choosing the ideal gear Fig. 219
Instrument panel: gear-change indi-
cat or (manual gearbo x). A gear change will be recommended if the
gear you ar
e in is not the most economical
choice . If no gear
-change is recommended, it
means that you are already in the most eco-
nomical gear.
Vehicles with a manual gearbox
The following display symbols
Page 229 of 300
Driver assistance systems
Adjusting the display and audible
w arnings The settings for the display and audible
warnings ar
e contr
olled via the Easy Con-
nect*.
Automatic activation
o n
Page 232 of 300
Driving
moved from the R position, and the optical in-
f ormation pr
o
vided by the Parking Aid system
will be displayed.
Also in combination with the system, the rear
assist image can also be concealed:
Page 245 of 300
Checking and refilling levels
Diesel with biodiesel (“B” st ands f
or Bio-
diesel). The number indicates the per-
centage of biodiesel in the diesel. “B7”
means, for example, a proportion of bio-
diesel of max. 7%.
Natural gas: “CNG” means Compressed
Natural Gas.
Type of petrol Applies to vehicles: with petrol engine
The corr ect gr
ade of petrol is listed inside the
fuel tank flap.
The vehicle is equipped with a catalytic con-
verter and must only be run on unleaded
petrol. The petrol must comply with the
standard EN 228 and be sulphur-free. Fuels
with a 10% ethanol ratio can be refuelled
(E10) 1)
. The types of petrol are differentiated
by using the octane numbers (RON) or via
the anti-knock index (AKI).
The following pieces of text show the infor-
mation included in the corresponding stickers
on the tank lid (examples): 2 3 Super unleaded petrol 95 octane petrol or
normal 91 oct
ane petr
ol at l
east
We recommend refuelling with super 95 oc-
tane petrol (91 AKI). If not available: normal 91
octane petrol (87 AKI) (with a slight power
loss).
Super unleaded petrol, 95 octanes at
least
You should use super 95 octane petrol (91
AKI) at least.
If super is not available, if necessary, use nor-
mal 91 octane petrol (87 AKI). In this case only
use moderate engine speeds and a light
throttle. Refuel with super as soon as possi-
ble.
Unleaded super plus 98 octane petrol or
super 95 octane petrol at least
We recommend refuelling with super plus 98
octane petrol (93 AKI). If not available: super
95 octane petrol (91 AKI) (with a slight power
loss).
If super is not available, if necessary, use nor-
mal 91 octane petrol (87 AKI). In this case only
use moderate engine speeds and a light
throttle. Refuel with super as soon as possi-
ble. CAUTION
Page 257 of 300
Wheels and tyres
Changing the battery A replacement battery must have the same
capacity, v
olt
age, current rating and size as
the original. The appropriate types of battery
can be acquired from authorised SEAT deal-
ers.
We recommend having the battery changed
by an authorised SEAT dealer, where the new
battery will be correctly installed and the
original disposed of in line with regulations.
Automatic disconnection of elec-
trical equipment When heavily-charging a battery, the pro-
gr
amme sel
ect
ed by the electrical system
control unit prevents the battery from auto-
matically discharging. This may result in the
following:
Page 283 of 300
Technical specifications
Vehicle data Dimensions Fig. 255
Dimensions.
TOLEDO
A/B Front and rear projection (mm) 876/1,004
C Wheelbase (mm) 2,602
D Length (mm) 4,482
E/F Front/reara)
track width (mm) 1,463/1,500
G Width (mm) 1,7
15
H Height at kerb weight (mm) 1,466
Turning radius (m) 10.2a)
This data will change depending on the type of wheel rim.
281