light SKODA FABIA 2000 1.G / 6Y Workshop Manual

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
Table of ContentsEdition 09.04
S00.5301.14.20II
- Changing brake fluid (every 2 years)...............................................................
- Inspecting the brake fluid level ......................................................................
- Track rod ends: Inspect play, correct attachment and joint boots .............................
- Inspecting tyres (including spare wheel) ...........................................................
- Inspecting the tyre tread depth (including spare wheel) and entering ........................
- Tightening wheel bolts to specific torque ..........................................................
- Inspecting the tyre inflation pressure (including spare wheel) and correcting the tyre
inflation pressure if necessary .......................................................................
Electrical System.......................................................................................
- Power windows: Inspecting positioning ............................................................
- Electrical components: Check for proper operation ..............................................
- Battery: Testing no-load voltage ....................................................................
- Battery: Inspecting electrolyte level, topping up with distilled water if necessary ...........
- Radio: Check for proper operation..................................................................
- Setting clock ............................................................................................
- Connect vehicle system tester and interrogate fault memory..................................
- Resetting service interval display (SID) QG0 .....................................................
- Resetting service interval display (SID) QG1 and QG2 .........................................
- Changing the code of the service intervals ........................................................
- Inspecting headlight beam setting and adjusting if necessary .................................
- Setting the headlight beam ..........................................................................
- Replace emergency battery for alarm system ...................................................
Body.......................................................................................................
- Airbag units: Visual inspection ......................................................................
- Inspect key switch for deactivation of front passenger airbag ..................................
- Check underbody protection and body paintwork for damage .................................
- Inspecting plenum chamber and water drain openings for dirt, cleaning if necessary .....
- Windscreen wiper/washer system: Check for proper operation ................................
- Sun roof: Cleaning and greasing runners .........................................................
- Door locks, locking buttons, child safety locks: Check for proper operation .................
- Replacing the dust and odour filter element ......................................................
- Sticking the vehicle data sticker .....................................................................
- ................................................................................. Inspect trailer coupling
Exhaust-emission Analysis..........................................................................
- Exhaust-Emission Analysis on Models with Fuel Engines ......................................
- Test Values for Exhaust-Emission Analysis on Models with Fuel Engines..................
- Exhaust-Emission Analysis on Models with Diesel Engines ....................................
- Test Values for Exhaust-Emission Analysis on Diesel Engines................................
Miscellaneous...........................................................................................
- Tow starting/Towing ..................................................................................
- Perform a test drive ...................................................................................
- Raising the vehicle ....................................................................................02-5page 2
02-5page 4
02-5page 5
02-5page 5
02-5page 6
02-5page 6
02-5page 6
02-6page 1
02-6page 1
02-6page 1
02-6page 1
02-6page 2
02-6page 2
02-6page 2
02-6page 3
02-6page 4
02-6page 7
02-6page 9
02-6page 10
02-6page 12
02-6page 13
02-7page 1
02-7page 1
02-7page 2
02-7page 2
02-7page 3
02-7page 3
02-7page 4
02-7page 4
02-7page 5
02-7page 6
02-7page 6
02-8page 1
02-8page 1
02-8page 2
02-8page 5
02-8page 6
02-9page 1
02-9page 1
02-9page 2
02-9page 2

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
General pointsEdition 09.04
S00.5301.14.2002-1 page 2 02
U - 1.9 ltr. TDI PD/96 kW/diesel engine
W - 1.2 ltr./40 kW/petrol engine
Y - 1.2 ltr./47 kW/petrol engine
Z - 1.4 ltr. TDI PD/55 kW/diesel engine
4 - Airbag System:
0 - no airbag
1 - 1 Front airbag
2 - 2 Front + 2 side airbags
4 - 2 Front airbags
8 - light weight utility vehicle
5 - Model:
6Y - FABIA, FABIA COMBI, FABIA SEDAN, FABIA
PRAKTIK, FABIA RS
6 - Internal code
7 - Model year:
Y - 2000
1 - 2001
2 - 2002
3 - 2003
4 - 2004
5 - 2005
8 - Manufacturing plant:
3 and 4 - Mladá Boleslav
6 - Kvasiny
7 - Vrchlabí
B - Solomonovo
N - Mladá Boleslav
X - Poznan
9 - Vehicle body number
Type plate
The type plate -arrow- is attached to the front of the left
wheel house.

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
InspectionEdition 09.04
S00.5301.14.2002-2 page 2 02
Pre-sales Inspection - (the Czech Republic)
Compare as-delivered condition of vehicle with order form Chapter
♦Engine fitted
♦Type plate in the engine compartment
♦Vehicle data sticker (compare with stamped identification number)
♦Colour of paintwork, badges, inscriptions
♦Seats (cover, colour) interior trim (colour)
♦Radio, speakers, aerial
♦Central locking system, anti-theft alarm system
♦Wheels, tyres
♦Sun roof
♦Vehicle log book - for completion: Operating manual and service plan (in the correct lan-
guage and with the correct edition data), a list of dealers, short introduction, technical da-
ta, other manuals (radio......) ) - all in the vehicle log book pouch
♦Other equipment (all equipment fitted in proper condition)
♦Vehicles in stock for more than 6 months: Change brake fluid
Inspections and operations to be completed
Vehicle (exterior)
–Plastic and rubber parts - cleanliness and damage
–Inspect bodywork and paintwork for damage02-7
–Check that all car keys and key number fobs have been provided; check that the sticker
for the key number for the electronic immobiliser is complete and legible
–Proper operation of door handles outside, door locks, child safety locks, door contact
switches and proper operation of all locks and keys (including spare keys), doors, boot lid/
tailgate, fuel filler cap, bonnet lock02-7
–Proper operation of anti-theft alarm system
–Tighten the wheel bolts to specified torque (steel and light alloy wheels 120 Nm), fit wheel
caps02-5
–Check the tyre inflation pressure (including spare wheel), if necessary correct the tyre in-
flation pressure, fit valve caps02-5
–Fit roof aerial
Engine compartment (from above)
–Check battery no-load voltage, recharge battery if necessary02-6
–Check tight connection of electric cables and plug connections (in particular battery ca-
bles)
–Inspect engine, gearbox, cooling system, brake system and fuel system for leaks02-3, 02-5
–Engine oil level (in-between markings on dipstick)02-3
–Brake fluid level (at „MAX“ marking)02-5
–Coolant level (in-between marking)02-3
–Fill up fluid in washer reservoir, in the winter add antifreeze
–Windscreen wiper/washer system and headlamp cleaning system: Check for proper oper-
ation02-7
Vehicle interior

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
InspectionEdition 09.04
S00.5301.14.2002-2 page 3 02
Delivery Inspection (Export)
–Proper operation of seat belts, seat belt height adjuster, power windows and sun roof
–Inspect upholstery, interior trim, carpeting and footmats for cleanliness and damage
–Inspect all switches, all electrical components, gauges/indicators and controls02-6
–Radio: Inspect for proper operation, store stations, set clock, encode02-6
–Reset service interval display02-6
–Power windows: Inspecting positioning02-6
–Key switch for airbag deactivation, front passenger side: Check function „ON/OFF“ and
switch-over to the position „ON“02-7
–Fit net in luggage compartment (if available)
–Check the car tool kit, spare wheel and accessories, that they have all been supplied and
are properly secured
–Install the carpets supplied in the vehicle
–Perform a test drive
Underside of vehicle (on lift platform)
–Inspect underbody (underbody protection for damage)02-7
–Inspect for leaks and damage: Engine, gearbox, final drive, steering, brake system, axles,
joint boots. Check proper routing of the brake hoses and brake lines, fuel lines including
ventilation of the fuel system02-3, 02-5
–Inspect tyres and wheels for damage02-5
Concluding operations
–Interrogate fault memory of all systems, if necessary erase02-6
–Remove protective seat covers
–Remove recharging table (if affixed)
–Complete the service schedule, affix the vehicle data sticker in the Service Schedule to
the floor of the luggage compartment next to the spare wheel„Next Service Date“ sticker
and affix to the side of the dash panel on the driver's side, hand the card „Škoda Assist-
ance“ to the customer02-7
–Final inspection to ensure proper condition for handover to the customer
Inspections and operations to be completed Chapter
Vehicle (exterior)
–Plastic and rubber parts: Inspect for cleanliness and damage
–Inspect bodywork and paintwork for damage02-7
–Check operation of the tailgate lock and the fuel filler cap, door contact switch, operation
of the door handles, door locks and safety buttons, central locking from outside as well as
inside, child safety locks, ability to close all locks on the vehicle using all keys (including
the spare key)02-7
–Check operation of the anti-theft alarm system
–Tighten the wheel bolts to specified torque (steel and light alloy wheels 120 Nm), fit wheel
caps02-5
–Check the tyre inflation pressure (including spare wheel), if necessary correct the tyre in-
flation pressure, fit valve caps02-5
–Vehicles in stock for more than 6 months: Change brake fluid02-5

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
InspectionEdition 09.04
S00.5301.14.2002-2 page 6 02
Every 30 000 km (QG0)
Includes: Annual inspection and additional operations stated in the table below
–Track rod ends: Inspect play and correct attachment of boots
–Check the tyre inflation pressure (including spare wheel), correct if necessary02-5
–Inspect tyre wear (including spare wheel)02-5
–Inspect tyre tread depth (including spare wheel) and record (FL..., FR..., RR..., RL...,
SP...)02-5
–Inspect exhaust system for leaks, damage and attachment
–Brake fluid volume: Check level, if necessary top up02-5
–Battery: test02-6
–Check the anti-freeze in the cooling system and record ...... °C, check for leaks, top up
coolant if necessary02-3
–Flap lock for the engine bonnet: grease
–Inspect operation of all switches, all electrical components, gauges/indicators and con-
trols for proper operation02-6
–Windscreen wiper and washer system: Inspect condition of wiper blades, wiper opera-
tion, washer system: if necessary top up fluid02-7
–Inspect plenum chamber for dirt, clean if necessary02-7
–Fuel filter: Drain away water (vehicles with diesel engine with fuel operation, which does
not comply with DIN EN 590-standard)02-3
–Inspect trailer coupling (with removable arm - manufacturer Profsvar)02-7
After each inspection
–Complete the „Next Service“ sticker and affix sticker to the side of the dash panel (on the
driver's side)
–Perform road test including inspection of proper operation of footbrakes and handbrake,
gearshift and steering, final inspection02-9
–„Mirror tag“ - complete and attach to interior mirror
–Hand customer the completed and signed form
Work involvedChapter
–Headlights: Inspect, if necessary adjust02-6
–Gear oil: Inspect level and top up if necessary (manual gearbox)02-4
–Fuel filter: Drain away water (vehicles with diesel engine with fuel operation, which does
not comply with DIN EN 590-standard)02-3
–Check underbody protection and body paintwork for damage02-7
–Dust and odour filter element for the passenger compartment: replace02-7
–Inspect operation of tilting roof and grease the runners02-7
–Inspect timing belt (petrol engines) - every 90 000 km, then every 30 000 km02-3

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
InspectionEdition 09.04
S00.5301.14.2002-2 page 9 02
–Check the tyre inflation pressure (including spare wheel), correct if necessary02-5
–Inspect tyre wear (including spare wheel)02-5
–Inspect tyre tread depth (including spare wheel) and record (FL..., FR..., RR..., RL...,
SP...)02-5
–Inspect exhaust system for leaks, damage and attachment
–Brake fluid volume: Check level, if necessary top up02-5
–Battery: test02-6
–Check the anti-freeze in the cooling system and record ...... °C, check for leaks, top up
coolant if necessary02-3
–Flap lock for the engine bonnet: grease
–Inspect operation of all switches, all electrical components, gauges/indicators and con-
trols for proper operation02-6
–Windscreen wiper and washer system: Inspect condition of wiper blades, wiper operation,
washer system: if necessary top up fluid02-7
–Inspect plenum chamber for dirt, clean if necessary02-7
–Inspect operation of tilting roof and grease the runners02-7
–Headlights: Inspect, if necessary adjust02-6
–Gear oil: Inspect level and top up if necessary (manual gearbox)02-4
–Draining the fuel filter (diesel engine)
–Inspect trailer coupling (with removable arm - manufacturer Profsvar)02-7
–Check underbody protection and body paintwork for damage02-7
–Dust and odour filter element for the passenger compartment: replace02-7
–Air filter: Clean the housing, replace the insert every 4 years or 60.000 km.02-3
–Replace the fuel filter (diesel engine with fuel operation, which does not comply with DIN
EN 590-standard)
–Ribbed V-belt: Inspect condition and for vehicles without tensioning pulley also the ten-
sion - every 60.000 km02-3
–Replace the fuel filter (diesel engine) - every 60.000 km
–Spark plugs: replace - every 60.000 km.02-3
–Automatic gearbox: Check the ATF level, and top up if necessary, every 60.000 km
–Check the timing belt for the camshaft on a 4-cylinder petrol engine at 90.000 km and
then every 30.000 km after that
–Replace the emergency battery for the alarm system - every five years02-6
After each inspection
–Complete the „Next Service“ sticker and affix sticker to the side of the dash panel (on the
driver's side)
–Perform road test including inspection of proper operation of footbrakes and handbrake,
gearshift and steering, final inspection02-9
–„Mirror tag“ - complete and attach to interior mirror
–Hand customer the completed and signed form Work involvedChapter

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 2 02
1)Regular grade unleaded petrol (min. 91 ROZ) can be used although engine power output is slightly reduced.
Engine identifi-
cation charac-
tersAME ATZ AQW AUA BBY
Emission stand-
ardEU2 D4 EU4,
EU3 DDKEU3,
EU4,
EU2 DDK,
EU3 DDKEU4,
EU2 DDK,
EU3 DDK
Manufacturing
(from...through)08.99 ... 04.03 11.99 ... 07.00 08.00 ... 03.03 05.00 ... 03.02 03.02 ... 05.04
Displacement in
litres1,4 1,4
Output (kW at
rpm)50 / 5000 55 / 5000
Max. torque
(Nm at rpm)120 / 2500 126 / 3800
Bore (∅ mm) 75,5 76,5
Stroke (mm) 78 75,6
Compression 10 10,5
Hydraulic valve
clearance com-
pensationXX
Mixture forma-
tionSimos 3PB Simos 3PA Magneti Marelli 4LV
Fuel RON (mini-
mum)unleaded 95
1)
1) Regular grade unleaded petrol (min. 91 ROZ) can be used although engine power output is slightly reduced.
unleaded 951)
Fuel CN (mini-
mum)--
Firing order 1-3-4-2 1-3-4-2
Exhaust gas re-
circulation-X
Ignition system/
fuel injectionSimos 3PB Simos 3PA Magneti Marelli 4AV
Self-diagnosis X X
Catalytic con-
verterXX
Turbocharging - -
Charge air cool-
er--
Lambda probe X X
Camshaft ad-
justment--

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 3 02
Engine identification
charactersAMF AUB BBZ ASY
Emission standard EU3 EU4
EU2 DDK,
EU3 DDKEU4,
EU2 DDK,
EU3 DDKEU3
Manufacturing
(from...through)05.03 08.99 ... 05.02 05.02 08.99
Displacement in litres 1,4 1,4 1,9
Output (kW at rpm) 55 / 4000 74 / 6000 47 / 4000
Max. torque (Nm at rpm) 195 / 2200 126 / 4400 125 / 1600 - 2800
Bore (∅ mm) 79,5 76,5 79,5
Stroke (mm) 95,5 75,6 95,5
Compression 19,5 10,5 19,5
Hydraulic valve clearance
compensationXXX
Mixture formation Bosch PDE - injec-
torsMagneti Marelli 4LV Bosch VP
Fuel RON (minimum) -
unleaded 98
1)
1)Regular grade unleaded petrol (min. 95 ROZ) can be used although engine power output is slightly reduced.
-
Fuel CN (minimum) 49 - 49
Firing order 1-2-3 1-3-4-2 1-3-4-2
Exhaust gas recirculation X X X
Ignition system/fuel injec-
tionBosch PDE - injec-
torsMagneti Marelli 4AV Bosch VP
Self-diagnosis X X X
Catalytic converter X X X
Turbocharging X - -
Charge air cooler X - -
Lambda probe - X -
Camshaft adjustment - - -
Engine identification char-
actersATD ASZ AZL BMD BKY
Emission standard EU3 EU3 EU4,
EU2 DDK,
EU3 DDKEU4,
EU2 DDKEU4,
EU2 DDK
Manufacturing (from...through) 02.00 06.03 08.00 05.04 05.04
Displacement in litres 1,9 1,9 2,0 1,2 1,4
Output (kW at rpm) 74 / 4000 96 / 4000 85 / 5400 40 / 4750 55 / 5000
Max. torque (Nm at rpm) 240 / 1800 -
2800310 / 1900 170 / 2400 108 / 3000 126 / 3800
Bore (∅ mm) 79,5 79,5 82,5 76,5 76,5
Stroke (mm) 95,5 95,5 92,8 86,9 75,6

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 4 02
Engine fitted
The engine identification characters and serial number
are located in the front at the engine/gearbox joint.
In addition, a sticker with the engine identification charac-
ters and serial number is affixed to the timing belt guard.
Engine with identification characters ARV, AQV, AZE,
AZF, AME, ATZ and AQW.
Engine with identification characters AUA, AUB, BBY,
BBZ, BKY.Compression 19 19 10,5 10,3 10,5
Hydraulic valve clearance
compensationXX X X X
Mixture formation Bosch PDE -
injectorsBosch PDE -
injectorsBosch ME 7.5 Simos 3PG Magneti Marelli
4TV
Fuel RON (minimum) - -
unleaded 95
1)unleaded 951)unleaded 951)
Fuel CN (minimum) 49 49 - - -
Firing order 1-3-4-2 1-3-4-2 1-3-4-2 1-2-3 1-3-4-2
Exhaust gas recirculation X X - - X
Ignition system/fuel injection Bosch PDE -
injectorsBosch PDE -
injectorsBosch ME 7.5 Simos 3PG Magneti Marelli
4TV
Self-diagnosis X X X X X
Catalytic converter X X X X X
Turbocharging X X - - -
Charge air cooler X X - - -
Lambda probe - - X X X
Camshaft adjustment - - - - -
1)Regular grade unleaded petrol (min. 91 ROZ) can be used although engine power output is slightly reduced.
Engine identification char-
actersAT D A S Z A Z L B M D B K Y

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 7 02
Replace engine oil filter
Vehicles with petrol engine
Special tools, test and measuring equipment and
auxiliary items required
♦Oil filter wrench
–Release oil filter (e.g. Würth, Hazet) and remove.
–Clean sealing surface at engine.
–Oil rubber seal slightly.
–Screw in new filter and tighten by hand.
–After filling with oil, run engine until it is at operating
temperature and inspect for leaks.
Vehicles with diesel engine
Special tools, test and measuring equipment and
auxiliary items required
♦Oil filter wrench -3417- or wrench 36
–Release cap -1-.
–Replace O-rings -2- and -3- as well as oil filter element
-4-.
–Tighten cap -1-.
Tightening torque of the cap: 25 Nm
Replacing timing belt and tensioning
pulley for camshaft drive (1.9 TDI en-
gines)
–Removing and installing the timing belt
⇒Rep. Gr. 13; 1.9/74 TDI Engine, Mechanics, or
⇒Rep. Gr. 13; 1.9/96 TDI Engine, Mechanics.
Replacing timing belt and tensioning
pulley for camshaft drive (1.4 TDI en-
gines)
–Removing and installing the toothed belt
⇒Rep. Gr. 13; 1.4/55 TDI Engine, Mechanics.
Inspecting timing belt for camshaft drive
for wear and running (petrol engine)
Check timing belt for:
♦Tears or splits -A-, cross-sectional fractures
♦Lateral catches -B-
♦Fraying or chunking -C-
♦Crack in the base tooth -D-
♦Separation of layers (timing belt housing, cords)
♦Traces of oil and grease
S02-0339
2
1
4
3