lock SKODA FABIA 2014 3.G / NJ Blues Infotinment Car Radio Manual


- Radio mode » page 8

 - Select media » page 10
 - Tone settings
» page 7
 - Advanced settings
» page 7


 - Settings mode:
› Radio » page 9
› Media » page 13

 - Backward and forward movement (if necessary settings of the se-
lected menu item values)
SD memory card slot Switching the unit on/off
Switching the unit on and off manually › Press
 to switch the device on or off.
Turn on device automatically
If the device was not turned switched off using the  button before the igni-
tion was turned off, this will automatically switch on after the ignition has
been switched on.
Switching off the unit automatically
If the vehicle key is pulled out of the ignition lock while the unit is switched on,
the unit will switch off automatically.
If the vehicle is fitted with the starter button, the device will switch off auto-
matically after the engine is switched off and the door is opened.
When the ignition is switched off, the unit switches itself off automatically af-
ter approximately half an hour (prevents the vehicle battery being drained).
The device can be turned off automatically under certain circumstances due to
the protection against the vehicle battery discharged or the device protection.
The device informs you of this via a text message on the device display.
› Low batt. - Vehicle battery almost empty
› Temp high, - Device temperature is too high
› Temp low - Device temperature is too low Note
When the device is switched on, the audio source and operating mode that
were active before switching off will be restored. 5
6
7
8
9
10
11 Setting volume
The clock is set using rotable adjuster 2
» Fig. 1 on page 4
.
The change in volume is displayed on the screen of the unit.
Increase the volume
› Turn rotable adjuster 2
to the right.
Reduce the volume
› Turn rotable adjuster 2
to the left.
Muting
› Adjust the volume using rotable adjuster 2
to the left to 0.
The symbol appears in the display when the sound is muted. .
Playback interruption occurs (pause) if media were being played at the time
the volume was reduced. CAUTION
■ High volumes can cause sound resonance in the vehicle.
■ The car speakers may be damaged if the volume is set too loud. Note
The device supports the volume setting of the currently received TP-traffic an-
nouncements. Operation using the buttons/dial on the multifunction steering
wheel
Fig. 2
Multi-function steering wheel -
Function keys
Some device functions can be operated via the buttons on the multifunction
steering wheel. 
5
Introductory information

Next menu item value
Current menu item value
Operation
Set value
The desired value of the selected item will be set to one of the following ways. › By pressing the
 or
 button.
› By turning the rotable adjuster 2
» Fig. 1 on page
4.
Exit setting
Setting is ended by pressing one of the buttons 
-
 .
If the device is not being operated, the display switches off after a few sec-
onds in the last selected mode of Radio or Media.Sound settings
› Press the

 button repeatedly.
The following menu items are displayed in sequence.
■ Bass - bass setting
■ Middle - mid-tone setting
■ Treble - treble setting
■ Balance - Sets the balance between the left and right
■ Fader - Setting the sound focus between front/rear (applies to vehicles with
rear speakers) Advanced settings
› Press the
 button repeatedly.
The following menu items are displayed in sequence.
■ GALA - Speed-sensitive volume adjustment (higher numbers indicate a
steeper increase in the volume level)
■ On volume - Sets the maximum volume when the device is turned on
■ TP volume - Sets the volume for in-coming traffic program alerts (TP)
■ PDC audio - Lowers the audio volume (e.g. radio volume) with activated park-
ing aid » Operating Instructions, chapter Parking sensors
■ Low - Low volume attenuation
■ Middle - Medium volume attenuation
■ High - High volume attenuation E
F ■
Clock - Time display on the device display (with the ignition on and the unit
off)
■ Yes

- Switches the time display on
■ No - Switches the time display off
■ Restore - Reset to factory settings
■ Press  - Confirmation of the factory settings 7
Introductory information

The unit only switches between connected audio sources with playable con-
tent.
The device can be connected to the audio sources connected to recognise
max. 1024 directories and play max. 6500 files. The device can play a max 1024
files from a directory.
The unit will play the contents of the connected audio source by alphabetically
sequenced directory and file name.
SD memory card
Read and observe and on page 11 first.
The SD memory card slot 11
is located on the front of the device
» Fig. 1 on
page 4.
Inserting an SD memory card
› Push the SD memory card into the available slot with the cut edge to the
front right until it
“locks into place”.
Playback starts automatically.
Removing an SD memory card
› Press the inserted SD memory card.
The SD memory card “jumps” into the eject position. CAUTION
■ Use only SD memory cards with a standard size. When using smaller SD cards
with the adapter the SD memory card can fall out of the adapter while driving
due to vehicle vibrations.
■ Due to differing quality requirements of different card manufacturers, it is
not always possible to guarantee playback from SD memory cards. ■ It may not be possible to play some or all files on the SD memory card, or
their playback may be limited.
 USB input
Fig. 6
AUX and USB inputs
Read and observe and on page 11 first.
The MDI input is above the storage compartment in the front center console
and is identified by the symbol  » Fig. 6 .
The USB input audio source can be connected directly or via a connecting ca-
ble.
Connect the USB audio source
› Plug the USB audio source into the corresponding well.
Playback starts automatically.
Separate USB audio source
› Disconnect the USB audio source.
Charge USB audio source
With the ignition on after connecting the USB audio source, the charging proc-
ess is automatically started (applies for audio sources where charging via the
USB connector is possible).
The charging efficiency can be different compared to the charging from the
usual mains power supply. Connected audio sources can be supplied / loaded
with a current of max. 1.0 A.
Some connected audio sources may not be recognised and cannot be charged.
The charging of the connected audio source is automatically stopped after
switching off the ignition. CAUTION
■ Extension cords, or reducers can impair the function of the connected audio
source.
■ A video playback is not supported. 

12 Media

Index
A
Adjusting the volume 5
Audio sources 11
AUX 13
AUX input 13
B
Buttons Device 4
Multi-function steering wheel 5
C
Clock 7
D
Declaration of conformity 4
Description 4
Description and Operation of device 4
Device display 4
Display Media 10
Radio 8
Settings 6
E
Extras manual search 9
Scan 9
F
File Formats 13
Frequency range 8
I
Important notes 4 M
Media 10
AUX 13
Display 10
File Formats 13
Operation 10
SD card 12
Select audio source 11
Settings 13
Supported Media 13
USB 12
Median Playback 11
Memory list 8
Multi-function steering wheel 5
O
Operation Media 10
Radio 8
Settings 7
P
Playback (media) 11
R
Radio Display 8
Frequency range 8
manual search 9
Memory list 8
Operation 8
Save station 8
Scan 9
Search for stations 9
Select station 8
Settings 9
TP 9
Traffic 9 S
Save station 8
Scan 9
SD card 12
Search for stations 9
Select audio source 11
Select station 8, 9
Settings Device 7
Display 6
Media 13
Multi-function steering wheel 5
Operation 7
Radio 9
Sound 7
Volume 5
Setup 7
Sound 7
Supported audio sources 13
Supported files 13
Switching the unit off 5
Switching the unit on 5
T
Time of day see clock 7
TP 9
Traffic 9
U
USB 12
USB input 12
V
Volume 5
15
Index