SKODA KAROQ 2020 Owner´s Manual

vehicle systems
CAR - Vehicle settings
Introduction to the subject
In the menu CAR travel data and information displayed on the vehicle and
some vehicle systems can be set.
Reset to factory settings
You can reset to factory settings in the Infotainment system in menu 
/
e

Driving
Starting-off and Driving
Starting and stopping the engine

Switching the ignition on/offFig. 240
Positions of the vehicle key in the ignition lock / starter button

Note
vThe engine running noises may be louder at first for a short time after start-
ing the cold engine.
v
You should not switch on any major electrical components during the heating
period, otherwise the vehicle battery will be drained unnecessarily.

v
After switching off the ignition, the radiator fan may intermittently continue
to run for approx. 10 minutes (also continuously).
Problems with the engine start - vehicles with starter button
Fig. 241
Engine start - hold key on but-
ton

Conditions for the system function
The following conditions must be met for the system to function correctly.
The driver

Brakes and Parking

Fig. 245
Parking brake operation

For the activation, deactivation and correct functioning of the system, the
following basic conditions are required.
The driver

Manual gear changing and pedals

WARNING (Continued)
vIf the vehicle stalls, with engine running, in the D, S , R or Tiptronic mode,
then the vehicle must be prevented from rolling away using the brake ped- al, or using the Auto Hold function. Even when the engine is idling, the pow-
er transmission is never interrupted - the vehicle creeps.
v
When leaving the vehicle, the selector lever must always be set to P .
Otherwise, the vehicle could start to move - risk of accident.
CAUTION

v If you want to move the selector lever from position N to position D / S
whilst driving, the engine must be running at idling speed.
v
When stopping on a slope, never try to hold the vehicle using the accelerator
pedal