WARNINGIf the car is locked and the safe securing system activated, no people must
remain in the car as it will then not be possible to either unlock a door or
open a window from the inside. The locked doors make it more difficult for
rescuers to get into the vehicle in an emergency
The alarm system is activated automatically approximately 30 seconds after
the vehicle is locked. This is automatically disabled after release.
CAUTION
Before leaving the vehicle, it must be checked that all of the windows, doors
and the sliding/tilting roof are locked in order to ensure the full functionality of
the anti-theft alarm system.
Note
The alarm system has its own power source, service life of which is 5 years. In
order to ensure functionality of the alarm system, we recommend that you get
the alarm checked after this time by a specialist garage.
Alarm trigger
vDo not polish the paintwork in a dusty environment - risk of paint scratch-
es.
v Do not apply any paint care products to door seals or window guides.v
Plastic parts
v Do not use paint care products.
v
Chromed and anodised parts
v Do not polish the chrome parts in a dusty environment - risk of surface
scratches.
v
Foils
The following instructions must be observed, otherwise there is a risk of foil
damage.
v Do not clean with dirty cloths or sponges.
v To remove ice and snow, do not use a scraper or other means.
v Do not polish the foils
v Do not use a pressure washer to clean the foils
v
Rubber seals
v Do not treat the door seals and window guides with any products - the pro-
tective lacquer layer could be affected.
v
Windows and external mirror glass
v Do not clean the inside of the windows with sharp objects - there is a risk
of damage to the filaments or glass antenna.
v Do not use a cloth, which was used to polish the body - this could soil the
window and reduce visibility.
v
Headlights/lights
v Do not dry off the headlights/lights, do not use sharp objects - there is a
risk of damage to the protective coating and subsequent cracking of the
headlight glass.
v
Reversing camera
The following instructions must be observed, otherwise there is a risk of
camera damage.
v Do not remove snow / ice with warm / hot water.
v To wash, never use a pressure washer or steam jet.
v For cleaning, do not use abrasive cleaners.
v
Door lock cylinder
v Make sure that as little water as possible gets into the locking cylinder
when washing the vehicle - there is a risk of freezing the lock cylinder!
v
Wheels v Heavy contamination of the wheels can affect the balance of the wheels -
this can result in vibrations and, under some circumstances, can cause pre-
mature wear of the steering wheel.
Removing snow and ice from the windscreensFig. 296
Installation location of the ice
scraper, removing the scraper
Sets the map display139
Turn the map display on / off178
Digital service schedule
55
Dipped beam
71
Dipstick
267
Directive 2014/53/EU
9
Disclaimer applications
122
external devices122
Mobile phones122
Display Coolant temperature
38
Fuel level39
Gear changes51
In the instrument cluster50
Display of a low temperature
49
Display of the instrument cluster Menus in the display of the instrument clus-ter
54
Display POIs in the map
182
Distance warning
238
Diverting calls
137
Door Child safety lock
62
Emergency locking288
Emergency locking of the driver
