lights SKODA OCTAVIA 1997 1.G / (1U) 1.8 92kw Engine Workshop Manual

Downloaded from www.Manualslib.com manuals search engine
19Cooling System
Edition 11.96

- Detach bracket -arrow- for refrigerant pipe. Continued for all models
- Remove both headlights: ⇒ Electrical System; Repair Group 94; Re- moving and installing headlights
- Remove the 4 bolts -arrows- for attaching
the top radiator mount.
- Remove the 4 bolts -arrows- for attaching
the bottom radiator mount.

Downloaded from www.Manualslib.com manuals search engine Cooling System19
Edition 11.96


Models with air conditioning
- Pull out radiator slightly together with conden-
ser.
- Detach clip -arrow- for attaching refrigerant
pipe.
Continued for all models
- Remove fan shroud (4 bolts).
Note: When removing and installing the fan shroud,ensure that the radiator ribs are not damaged.
- Carefully take out the radiator downward. Installing Installation is performed in the reverse order; pay attention to the following points:
- Tighten thermostatic switch -1- to
35 Nm.
- Fit on the brackets -2- and -3- at the radiator, as illustrated.
- Tighten the bolts for attaching the fan shroud and radiator mounts to
10 Nm.
- On models with air conditioning, tighten the bolts for attaching condenser and bracketsfor refrigerant pipes to10 Nm.
- Replace O-rings in the connection fittings of the coolant hoses.
- Insert drain plug for coolant.
- Fill system with coolant ⇒ page 19-3.
- Install headlights: ⇒ Electrical System; Repair Group 94; Re- moving and installing headlights
- Electrical connections and routing: ⇒ Current Flow Diagrams, Electrical Fault Finding and Fitting Locations binder