key SKODA OCTAVIA 2005 1.G / (1U) Nexus Navigation System Manual

Quick Reference Guide3
selected. A column will indicate the volume level. The
volume of a telephone conversation can also be regulated
using the volume control.
Entries in the screen menus can be made using the menu
button. Turn to mark a function or a sub-menu. Press to
select a function or a sub-menu.
Sound and sound centre settings . . . . . . . . . . . . . . . . . .
Left and right of the screen - 5 function/station keys.
 The term function key is used because the keys have
different functions depending on the menu being shown in
the display. If the text says, for example, “Press
”, then press the function key next to where
the text “Dest. on map” appears on the screen.
 Station keys: The upper 6 function keys are used as
station buttons in the radio mode. Stations can be stored
on these keys. The upper 6 function keys can be used to
select the inserted CDs in CD changer mode.
Backwards/forwards keys, apply to the active audio
source
 press briefly: radio mode: station change in the memory;
CD mode: changes track
 press longer: radio mode: station change in the station
listing; CD mode: fast forward/backward search
Switches between day and night display or darkens the
screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Slot for an audio or navigation CD. . . . . . . . . . . . . . . . . . . .
CD eject button. The ejected CD will be pulled back into
the unit if it is not fully withdrawn within 10 seconds.
Set flagged destination. The unit will store the current
vehicle position when this button is pressed. When this
button is pressed again, the flagged destination will be over-
written if it has not been stored in the destination memory. . The traffic jam button calls up the input menu to exclude
route sections in a route list or to enter traffic jam information
manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Back to previous menu. Map display when Navigation CD is inserted / Switch
to symbol display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calls up the Navigation main menu. . . . . . . . . . . . .
Switches to other auxiliary audio or video units. . . . . reserved for additional functions at a later date
CD and CD changer control
1)
. . . . . . . . . . . . . . . . . .
Radio menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call up system settings, traffic reports, position
displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WARNING
Adjust the volume so that you can still hear signals coming from
outside the vehicle, such as fire brigade, ambulances or police
cars.
Caution
The screen is not a touch screen. Do not press on the surface. The screen
can be cleaned with a soft cloth (and alcohol, if necessary). Do not use
solvents such as turpentine or petrol to clean the surface as they will
corrode the material.
A2A3
Š
12
A4
Dest. on map
A5
ƒ
„
A6
r
42
A7
10
A8
³
A9
®
17, 23
1)You will find a description in the corresponding Owner´s Manual.A10
30
A11
ESC
A12
MAP
39
A13
NAVI
16
A14
AUX
44
A15
TELE
A16
CD
10
A17
RADIO
6
A18
INFO
41
sao.book Seite 3 Montag, 22. M‰ rz 2004 9:32 09

Quick Reference Guide
4Display elements on the screenThis section describes the elements seen in the display.
The functions or sub-menus shown on the screen can be called up by
pressing the function key situated directly next to them. This can also
be carried out by first turning the menu knob and then pressing it.
The orange selection box can be moved using the menu knob. It will
disappear from the screen if the unit is not used for 30 seconds and
will appear again if the menu knob is turned.
The selection of the function characteristics, such as destin. or
overview , can only be reached by pressing and turning the menu
knob.
The right part of the status bar contains additional information or the
option “back with ESC”
Details of the active audio source or navigation status are shown in
the centre part of the status bar.
The left part of the status bar shows the current menu. Below the status bar
An orange marking indicates which source is active. Press the key
beneath it to call up the main menu for this source.
A green marking indicates which source is still active in the background
(the radio in this example). Press the key beneath it to call up the main
menu for this source.
If the text
CD ? is displayed in the marking above the button, the CD
inserted in the CD drive can not be read.
Switching on and offA safety code made up of four characters must be entered
when switching on for the first time.Switching on/off
– Press the rotary/push knob Ÿpage 2, fig. 1 .
wide
Map type
Alignment AutozoomSet-up back with ESC
detailedoverview
travel
location
Syst. settings Time format dest.
arrival
travel t. north
auto
D
F
E
C
A
B
Bra-0078
Fig. 2 Display
elements
AAABACADAEAF
CD
Dest. entry active
Please enter the unit code PIN code
Bra-0028
Fig. 3 Entering the
safety code
A1
sao.book Seite 4 Montag, 22. M‰
rz 2004 9:32 09

Quick Reference Guide5
– Press the rotary/push knob again to switch the unit off.
Entering the safety code
– The safety code can be found on the unit card.
– Enter the characters by turning and pressing the menu knob Ÿpage 4, fig. 3 .
– Press if you wish to change incorrect entries.
– Once the safety code as entered corresponds to the code given on the unit card, press .
The last menu used and also the last audio source used before switching
off will be selected automatically when the unit is switched on again. The
radio navigation system will be switched off if the ignition is turned off. The
unit can be switched on again using the rotary/push knob when the igni-
tion is switched off. It will be switched off automatically after an hour to
stop the vehicle battery from running down.
The following text might appear if there is no CD in the CD slot and the
safety code has been entered and you have pressed : No CD is
inserted. Please insert a ŠkodaAuto Navigation RNS CD.
If you do not wish to use the navigation system immediately, you can still
select a different audio source by pressing the appropriate button.
Comfort Coding
If you have not received a security code for your radio, it means that your
car is fitted with comfort coding system, which does not require a code. In
case of disconnection and reconnection of car battery, first switch on the
power by the starting key, then switch on the radio. If you need a code,
contact your Škoda service.
Note
The unit will be blocked for one hour if an incorrect code is entered three
times. The code can be entered again after this one hour has elapsed.
„
OK
OK
sao.book Seite 5 Montag, 22. M‰ rz 2004 9:32 09

Radio/CD/Sound
6Radio/CD/SoundRadio Overview
Information is given here on how to select and store
stations.The following radio functions are selected via the function keys:x
– Scans stations or stores those stations with the strongest
reception Ÿpage 6, “Scan/AS”,
x
– Calls up station list or manual frequency input Ÿpage 8,
“Station selection from a list (FM only)”,
x
– Sets the waveband and traffic radio, mute function Ÿpage 7,
“Setting waveband/Muting”,
x
– Set-up for RDS functions Ÿpage 9 Settings.
Scan/AS
The stations with the strongest reception are either
scanned or stored automatically.Playing stations briefly
– Briefly press Ÿ fig. 5.
Autostore on the second memory level (FM2 or AM2)
– Press for longer than 2 seconds to allocate those
stations with the strongest reception in the selected waveband
(FM2 or AM2) to the upper 6 function keys.
Set-upBand
Dest. entry active
List / _MANBra-0029
Fig. 4 Radio main
menu
Scan / _ASList / _MANBand
Set-up
Bra-0030Set-upBand
Dest. entry active
List / _MAN
Fig. 5 Autostore AS
Scan / _AS
Scan / _AS
sao.book Seite 6 Montag, 22. M‰
rz 2004 9:32 09

Radio/CD/Sound7
Autostore for all memory levels (Initial Autostore)
– Press for longer than 10 seconds to allocate those stations with the strongest reception in all wavebands to the
upper 6 function keys.
The selected function will be shown on the screen and can be stopped by
pressing again.
A scan in the FM waveband will play through the list of registered stations.
A scan in AM will play all stations with a high quality reception. Each
station scan lasts 8 seconds. Press the menu knob or if you
would like to stop at the station currently being played.
Note
Use the function “Initial Autostore” if you are using the unit for the first time
or when selecting new stations in the waveband. Any station names on the
station keys will be overwritten. The process of searching for and storing
the station names takes a few seconds.
Setting waveband/Muting– Press in the radio main menu Ÿpage 6, fig. 4 to see
the frequencies.
– Press or to receive VHF stations.
– Press or to receive medium wave stations.
– When in FM1 or FM2 mode, press to receive traffic infor- mation reports.
– Press / to mute the radio or to switch the mute function off/on.The last heard station will be played for the waveband selected. Traffic
information reports will be relayed even when the radio has been muted.
The TP function must be active for this purpose (white column next to the
field). When TP is active, the letters TP are lit up in orange. The increased
Scan / _ASScan / _AS
Scan / _AS
Bra-0031
back with ESCRadio off
Dest. entry active
Band
Fig. 6 Radio waveband
BandFM1
FM2
AM1
AM2
TP
Radio off
Radio on
sao.book Seite 7 Montag, 22. M‰ rz 2004 9:32 09

Radio/CD/Sound
8volume level for the traffic announcement can be lowered by pressing the
button .Station selection from a list (FM only)
The radio navigation system will automatically compile
and store a list of receivable FM stations after the unit is
switched on.– Press in the radio main menu Ÿpage 6, fig. 4 to
see the stored stations.
– Select a station by turning and pushing the menu knob or by using the right-hand function keys. – Select a station from the list by turning and pushing the menu
knob. You can scroll through several pages of the list using the
scroll markers , , and and confirm your selection
by pressing .
– You can also select the stations stored in the list by pressing the button or for more than 2 seconds.
Station selection from memory or by entering frequencyStation selection from memory
– Briefly press button or to listen to the stored station.
Station selection by entering frequency
– Press the button Ÿ page 2, fig. 1 and hold it
pressed for more than 2 seconds. As soon as the information
regarding the frequency appears with an orange frame and
the word manual in the middle of the display, you can manu-
ally enter the frequency. The station finding starts in the
selected direction in steps of 0.1 MHz (FM) or 9 kHz (AM). You
can set in this way one of your known station frequencies. You
can also change the frequency by turning the menu knob.
– For fine tuning press the button or .
INFOStation list back with ESC
Dest. entry activeStation list
Bra-0032
Fig. 7 List of stations
List / _MAN
s
q
t
u
OKƒ
„
ƒ
„
List / _MAN
A5
ƒ
„
sao.book Seite 8 Montag, 22. M‰
rz 2004 9:32 09

Radio/CD/Sound9
Allocating the stations to the station buttons
Stations can be allocated to the buttons to make it easier
to select them quickly.– Press one of the upper 6 station buttons until you hear a signal
Ÿpage 2, fig. 1 . The station you are listening to is now
stored on the button.A total of six stations can be stored on the station buttons for each mode;
FM1, FM2 or AM1 or AM2. The short form of the station name or the
station frequency will appear next to the button. Press one of the buttons
if you wish to listen to one of the stored stations.
Note
The memory on a button will be overwritten if a new station is stored
there.
RDS settings
Some stations transmit text and information in addition to
the station name.– Press in the Radio main menu Ÿpage 6, fig. 4 .Further text information as running text will not be displayed on the
screen, in addition to the station name, for all RDS stations.
A tick
d will indicate which options have been selected.
Function keys
x
fixed : Only the station name will be shown.
x
variable : Text information is shown as running text.
– autom. : The selected regional programme of a station
broadcasting over a wide area will continue to be displayed even when
A4
variable
off
Set-up back with ESC
Dest. entry active
autom.
Syst. settings fixed
RDS regional
RDS name
Bra-0033
Fig. 8 RDS functions
Set-up
RDS NameRDS Regional
sao.book Seite 9 Montag, 22. M‰
rz 2004 9:32 09

Radio/CD/Sound
10you enter the broadcasting area of another regional programme of the
same station.
Ÿpage 42
WARNING
Your attention must, however, always be concentrated on road
traffic as an absolute priority. Do not allow yourself to be distracted
by the RDS running text.CDListening to an audio CD
Listening to a CD
– Press the button Ÿpage 2, fig. 1 . If a CD is already in the
player, the last played track will be selected. Otherwise the
following will appear briefly on the screen: “No Audio CD”.
– Insert a standard 12 cm audio CD. The play function will start automatically.
Playing the previous or next track
– Press button or briefly.
Fast forward/reverse
– Press and hold button or .
Ejecting a CD
– Press Ÿpage 2, fig. 1 .The number of the track and its length are shown on the screen. TP lights
up in orange if traffic reports are to be received and TMC indicates
whether TMC stations are being received Ÿfig. 9 .
Function keys during the play function: ... – Selects the corresponding CD in the CD changer if
connected
2).
– Selects the CD that is in the unit.
– All tracks on the CD will be played for 8 seconds at a time.
– The tracks on the CD will be played in a random order. Ÿpage 42
Syst. settings
Syst. settings
Dest. entry active
Bra-0034
Fig. 9 Main menu CD
2)You will find a description in the corresponding Owner´s Manual.
CD
ƒ
„
ƒ
„
³
A8
CD1
CD6
Int. CDScanMixSyst. settings
sao.book Seite 10 Montag, 22. M‰ rz 2004 9:32 09

Radio/CD/Sound11
WARNING
The CD player is a class 1 laser product. If it is opened, or is faulty
or damaged, there is a risk of invisible laser beams escaping from
the unit. The CD player contains no parts that have to be serviced.
Any repair work that needs to be done should, therefore, be carried
out by Škoda Service exclusively.
Caution
x
Only 12 cm standard CDs should be used, not 8 cm single CDs. Only
round CDs should be inserted in the CD slot. “Special shape CDs” can not
be played and they will damage the CD player.
x
Slide the CD with the printed side up into the CD slot up to the point
where it is drawn in automatically. Hold the CD at the sides. Avoid leaving
fingerprints on the CD. Clean the CD with a dry, lint-free cloth. When doing
this, wipe the CD from the centre outwards. Do not clean the CDs using
alcohol or solvents. Do not place the CDs near heat sources or in the
direct sunlight. Do not write on the CDs and do not attach stickers to them.Note
x
The upper 6 function keys are only active if a CD changer has been
connected.
x
CD-R and CD-RW formats can also be played, depending on the
quality of the blanks.
x
If the text CD ? is displayed in the small marking above the button,
the CD inserted in the CD drive can not be read.
Applies to vehicles: with CD changerPlaying a CD from the CD changer
How to use the radio navigation system to select a CD in
the CD changer.– Use the function keys to to select a CD from the changer.Uneven road surfaces and strong vibrations may cause the CD to jump.
The CD play function should be switched off in this case.
CD
Syst. settings
Dest. entry active
Bra-0077
Fig. 10 CDs currently
in the changer
CD1
CD6
sao.book Seite 11 Montag, 22. M‰ rz 2004 9:32 09

Radio/CD/Sound
12Sound, sound focus and volumeThis section describes how the sound character and the
volume of different sound sources can be set individually.
– Press the button Ÿpage 2, fig. 1 to open the Sound
main menu.Function keys in Sound main menu:
or – Treble or Bass settings Ÿfig. 11
3) – Volume setting for the mid-range frequencies
– Sound focus setting left/right
– Sound focus setting front/rear – Opens the volume set-up where individual volume settings can
be made for the different audio sources Ÿfig. 12 .
Function keys in the volumes set-up function: – The setting for the sensitivity of the speed-dependent volume
adjustment (GALA). The volume of the audio source will be increased
automatically by GALA as the road noise increases at higher speeds. The
volume will be increased more the further the control is set towards the
right.
– Minimum volume for traffic announcements – Minimum volume for telephone conversations
– Minimum volume for navigation system announcements – The traffic announcements are muted as long as a orange
bar can be seen next to the function key.
– Sets the minimum volume for when the unit is switched on.Note
By pressing buttons Ÿpage 2, fig. 1 , and status button
at the same time, you can reset the radio navigation system to the
R F
Bass
back with ESC
TrebleSound RADIO
VolumeBra-0035
Fig. 11 Sound main
menu
Initial volumeVolume set-up
back with ESC
NAV mute
Telephone
NAV min
TA min
GALA
Bra-0036
Fig. 12 Volume
settings
3)Vehicles with a sound system
Š
A3
Treble
Bass
MidBalanceFaderVolu meGALATA M i nTelephoneNAV MinNAV muteInitial volume
Š
A3
TELE
A15
A10
sao.book Seite 12 Montag, 22. M‰
rz 2004 9:32 09