change time SKODA OCTAVIA 2007 1.G / (1U) Audience Car Radio Manual

Disc loading slot
Important notice!
Activation of CD playback modeCD
NO CD Activation of
CD disc loading mode LOAD Your radio is fitted with a built- in changer for 6
CD- DA, CD- R, CD- RW discs containing MP3
or audio files.
The CD drive used in this radio is operated in a
completely different fashion than common CD
car stereos. Do not attempt to load a disc
unless instructed to do so on the display. First,
read the instructions describing proper loading
of a CD. The radio or the disc can be damaged
when these instructions are not followed.
While
listening to the radio, press button . If no
CD is inserted, you will be notified of the fact by message. In this case, follow the
instructions given in the chapter . If a CD has been
inserted, playback starts from the point where
it has been interrupted the last time. 2
Display indications in the CD mode
REPEATMIX
A Current track number
B Play time indication
C Area reserved for preset buttons . Press
a button to select a disc to be played.
D Currently played disc indication
E Icon - mode active See chapter Optional functions in the CD mode
F Icon - mode active See chapter Optional functions in the CD mode 12
Activation of CD disc loading mode LOAD
LOA D
„SELECT CD TO INSERT”
NO CDPLEASE
WAIT” “INSERT CD”
Tip: LOAD LOAD ALL
Follow the instructions when loading discs:
1. Press button
2. After message
appears, press preset button beside the
empty position labelled .
3. The drive prepares for insertion of a CD;
please wait (the display shows“ message).
4. When message appears, insert the disc with printed side up.
Press and hold button
To fill the changer. (You can insert up to 6 CDs in
sequence.) After message appears,
release the button and you will be prompted to
insert all discs in sequence.
After the last inserted CD is recognized and
read, playback begins. 17
12
17
Operation of the Built- In CD changer
Listening to a CD
10
A
DF BC
EC

Ejecting the discEJECT
SELECT CD TO EJECT
PLEASE WAIT REMOVE CDINSERT CD
LOA D
Tip EJECT
EJECT
ALL When replacing or ejecting the disc, observe
the instructions in this manual and on the radio
display:
1. Press button .
2. After “ ” message ap- pears, press preset button corres-
ponding to the disk you want to eject.
3. “ ” message appears and the drive prepares for ejection of selected disc.
4. Disc is being ejected and “ ” message appears. You can remove the disc.
5. After removing the disc, “ ” message appears and you can insert
another disc without having to press the
button
: Press and hold button to eject all
discs from the changer. After message appears, release the button.
If you do not remove ejected disc from the unit,
it will be drawn back to the unit automatically
for safety reasons. If no CD is inserted in the
changer, the unit switches to radio mode
automatically after 10s. 13
12
17 13
Operation of the Built- In CD changer
SCAN functionSCAN
OK
Stopping playback FM AM
Press button to start searching through
the disc. A 10- second sample of the beginning
of each track is played. The sequence number
of the track on the disc is displayed at the same
time.
Press preset button to end the scan
mode. Current track will be played normally.
To stop disc playback and to switch on the
radio, press button or .
The last selectedstation will play. 5
3912
Selection of discs and tracks
CD1-
CD6 NO CD
Track select buttons
Seek buttons In CD playback mode, you can select a disc by
pressing a preset button labelled . Empty positions are labelled .
During CD playback, press button to skip
to previous track.
Press button to skip to next track. Playback
starts from the beginning of selected track.
Press and hold button or for fast rewind
or fast forward within a track of the CD. Normal
playback resumes after you release the button.




12
6
6
7
11
GB

Display indications in the CD - MP3 mode
A Number of currently played disc
B Number of currently played folder
C Area reserved for preset buttonswith the following symbols:
Previous/next folder
FILE Selection of information display for the playing track in the field F
D Number of currently played track
E Elapsed track time
F Track information. By pressing the preset you can select between
FILE / FOLDER / TITLE / ARTIST /
ALBUM. If this information has not
been entered upon disc creation,
„ “ appears on the
display.UNAVAILABLE 12
12 SCAN function
SCAN
OK
Disc Selection CD
Stopping playback FM AM
Press button to activate searching
through the disc. A 10- second sample of the
beginning of each track is played. The
sequence number of the track on the disc is
displayed at the same time. After 10s, the
beginning of next track is played. You can select
folders to be searched through by pressing the
corresponding preset buttons .
Press preset button to end the scan
mode. Current track will be played normally.
If you want to play another inserted disc, press
button for the disc selection screen to
appear.
You can select the desired disc by pressing the
appropriate preset button .
To stop disc playback and to switch on the
radio, press button or .
The last selectedstation will play. 5
2 12
12
12
39
12
INFO function INFO
MP3 INFO
Displaying additional information ID3 INFO
Press button to display information
about currently played track and about the
folder. The radio will display track
and folder names in the format in which they
are stored on the MP3 CD.
Individual MP3 files are organized in a
hierarchy commonly used on personal
computers. Due to high number of tracks,
which can besaved to a disc, we recommend
use of folders to organize tracks.
Press preset buttons to display
additional information about currently
played track (ID3 tags). 10
12
Playback of MP3 files
Operation of the Built- In CD changer
AD
F B
C
E
C

AUX
AUX VOL
Third level of AUDIO settings
GALAGALA
PDC VOL* PDC VOL
Your radio has an external input allowing
playback from other audio sources.
sets sensitivity of the external input.
Passage to the next level of settings
Your radio automatically increases the volume
with increasing drive speed so that perceived
volume does not change. The rate of increase
can be set by pressing preset button
and turning of button . Higher numbers mean
sharper increase. When 0 is set, the volume
does not change.
Sometimes, excess volume can distract you
when parking your car. If your car is fitted with
“parking aid” device, the radio will lower the
volume to preset level when the “parking aid”
unit is active. Press preset button
and turn button to set the volume level, to
which the volume will be reduced auto-
matically during parking.

12
1
12
1
Setting tone
TREBLE
MIDTONE
BASS
Additional audio parameters
LOUD
LOUDNESS
LOUD ON OFF
MONO Press button and user preset button to
select a parameter; an indicator will mark the
parameter and you can then set the value by
turning button . treble setting
mid setting
bass setting
At lower volume, function boosts
the bass and treble. Pressing preset button and selecting activates this function.
Selecting deactivates it.
The stereo decoder is activated whenever the
input signal is strong enough. The decoder is
switched off when the tuner receives weak
signal. 812
1
12MONO OFF
MONO ON
Second level of AUDIO settings
AUDIO
BALANCE
FADER The stereo decoder is activated whenever the
input signal is strong enough.
Under certain circumstances, stereo sound is
interrupted and in low- quality, even if the
input signal is strong. This occurs for example
when driving in urban areas. You can turn off
the stereo decoder and listen to mono sound
with increased quality. Passage to the next level of settings
By pushing the button and passing to the
second level of settings by the preset
button these settings are available:
Setting the balance between the right and the
left speakers.
Setting the balance between the front and the
rear speakers.


8
14
AUDIO settings
User Settings

ILLUMILLUM 1
2
AC*
AC
ON
AUX AUX ON AUX OFF
BACK
Press preset button to set if you
want the radio backlight switched off when the
headlights are off. If you set , the volume knob
ring will be illuminated whenever the ignition is
on.
If your car is fitted with CLIMATRONIC unit, the
display of your radio will display any manual
change of the settings. This you can check
whether the change you performed was
accepted by the unit. If you want this
confirmation, press preset button and
set to .
Note: the display is only a setting aid. The radio
has no effect on climate unit control, and the
climate unit cannot be controlled from the
radio.
Your radio has an external input allowing
playback from other audio sources. The input is
active, if . If , the input is
deactivated.
Press preset button
to return to
previous menu level.
The display clears after 10s of inactivity. 12
12
12 If you have external amplifier connected, your
radio can be used to select sound effects
suitable to particular programs you listen to.
Press button to view a display with
available sound effects. External amplifier has
6 implemented sound effect, divided into the
following menus:
Standard linear frequency response,suitable for all types of music or
speech.
A sound effect which boosts the speech and reduces other sounds,
thus improving the clarity of speech.
A sound effect most appropriate for rock music.
To move to other display with available sound effects.
LINEAR
SPEECH
ROCK

8
Ext. Amplifier control*
16
PHONE
PHONE
ON OFF
TIME TIME ON/OFF
TEMP TEMP ON/OFF
If your car is fitted with a handsfree set, the
radio can be muted automatically during
incoming or outgoing call. Activate this
function by pressing preset button
. When is set, incoming calls will have
no effect on the radio.
Press preset button to switch
on/off the time display on the display of your
radio.
Press preset button to
switch on/off the exterior temperature display
on the display of your radio.
Another push of the preset button
displays the last level of special features
settings:

12
12 12 12
User Settings