clock reset SKODA OCTAVIA 2007 1.G / (1U) Owner's Manual

Instruments and Indicator/Warning Lights
10
Instruments and Indicator/Warning Lights
General view of the instrument cluster
Engine revolutions counter ⇒ page 10
Coolant temperature gauge ⇒page 11
Fuel gauge ⇒ page 11
Speedometer
Display:
− with counter for distance driven ⇒page 12
− with Service Interval Display ⇒page 12
− with digital clock ⇒page 14
− with Multi-functional indicator* ⇒page 14
− with Information display* ⇒page 18
Clock-set button / reset button When the lights are switched on, the instrument cluster is illuminated.
Engine revolutions counter
The start of the red zone in the revolutions counter
⇒fig. 2 indicates the
maximum permissible engine speed for all gears for an engine which has been run
in and operating at a normal temperature. You should shift into the next higher gear
before this red zone is reached, or move the selector lever into position D if your
car is fitted with an automatic gearbox.
One should shift to the next lower gear at the latest when the engine is no longer
running “smoothly”.
Avoid high engine speeds du ring the running-in period ⇒page 189.
Fig. 2 Instrument cluster
A1
A2
A3
A4
A5
A6
A1
NKO A5 20 MR08.book Page 10 Wednesday, April 11, 2007 2:54 PM

Instruments and Indicator/Warning Lights
14
Digital clock
A clock-set button is installed on the bottom left beside the speedom-
eter for adjusting the clock ⇒page 10, fig. 2 .
Set hours
– Turn the reset button to the left.
Setting minutes
– Turn the reset button to the right.
WARNING
The clock should not be adjusted while driving for safety reasons but only
when the vehicle is stationary!
Multi-functional indica tor (onboard computer)*
Introduction
The multi-functional indicator appears in the display ⇒fig. 5 or in the information
display ⇒page 18, fig. 10 depending on the equipment fitted to your vehicle.
The multi-functional indicator offers you a range of useful information.
Note
In certain national versions the displays appear in the Imperial system of
measures.
Memory
The multi-functional indicator is equi pped with two automatic memories. The
selected memory is displayed in the middle of the display field ⇒fig. 5 .
The data of the single-trip memory (memory 1) is shown if a 1 appears in the
display. A 2 shown in the display means that da ta relates to the total distance
memory (memory 2).
Switching of the memory takes place when the button ⇒page 15, fig. 6 .
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the igni-
tion is switched on until it is switched of f. New data will also flow into the calcula-
tion of the current driving information if the trip is continued within 2 hours after
The outside temperature⇒page 16
Current fuel consumption⇒page 16
Average fuel consumption⇒page 16
Range⇒page 16
Distance driven⇒page 16
A6
Average speed⇒page 17
Driving time⇒page 17
Warning against excessive speeds*⇒page 17
Fig. 5 Multi-functional
indicator
AB
NKO A5 20 MR08.book Page 14 Wednesday, April 11, 2007 2:54 PM