heating SKODA OCTAVIA 2008 2.G / (1Z) Swing Car Radio Manual

CD player9
The unit plays the MP3 data stored on a data carrier in a certain sequence
⇒ page 8, fig. 1 . The illustration shows an exampl e of a typical MP3 CD containing
the titles (Tracks
), folder (Folder
) and sub-folder.
Information on how to use a CDCD to jump
Uneven road surfaces and strong vibrations may cause the CD to jump.
Formation of condensation
When it is cold and after rain showers, moisture can deposit in the CD drive
(condensation). This can effect the CD ju mp or impair the play function. In such
cases wait until the moisture has dissipated.
Notes for the care of the CDs
If a CD is soiled, please never clean the CD in the direction of a circle but rather from
inside to outside with a soft lint-free cloth. In case of severe layers of dir t we recom-
mend to clean the CD with a commercially available CD cleaner. Also in this case do
not clean the CD in the direction of a circ le but rather from inside to outside and
then let it dry off.
Overheating protection
If the temperature in the unit exceeds 85°C, the play function of the CD is ended for
safety reasons.
Caution
•
Never use liquids such as gasoline, paint thinner or disk cleaner, otherwise the
surface of the CD could get damaged!
•
Never expose the CD to direct sun rays!
•
Please never write or affix the CD!Note
Dirt or damage of a CD can lead to difficulties when “reading” the information. The
difficulty in reading the error depends on th e dirt or on the severity of the mechan- ical damage. Severe scratches cause reading errors which can make the CD jump or
“
get stuck ”. All CDs must be treated carefully and always be stored in a protective
case.
External sources*Input AUX-IN
– Activate the AUX-IN socket by pressing the button and by subsequently pressing the function key .
– The input for external audio sources AUX-IN is located under the armrest of the front seats.
– External audio sources, which are not connected to the AUX-IN socket, cannot be operated via the radio.
Input MDI - Multimedia socket (MEDIA-IN)
– Activate the AUX-IN socket by pressing the button and by subsequently pressing the function key .
– The input MDI is located in the glove box.
Fig. 2 AUX-IN and MEDIA-IN
socket
MEDIA
AUX
MEDIA
PD
s334.7.book Page 9 Tuesday, August 12, 2008 9:23 AM