turn signal SKODA OCTAVIA 2008 2.G / (1Z) Swing Car Radio Manual

Radio
4Audio settings– Press the button and then the station key and select the desired
parameter.
– Set the desired value by turning the rotary/push knob .You can select between the following parameters:•
BASS - bass setting;
•
MIDDLE - midtone setting;
•
TREBLE - treble setting;
•
BALANCE - setting of the volume ratio between the left and right side;
•
FA D E R - setting of the volume ratio between the front and the rear;
•
ON VOL
•
PDC VOL
•
GALA
•
LO U D - in case of low volume level, this function reinforces the range of bass
and treble frequencies;
ON VOL
Your radio stores the last volume set before switching off. If the value is higher, the
volume is reduced to the value of the parameter ON VOL after switching on the
radio again.
GALA
Your radio increases automatically its volu me with the increasing vehicle speed. A
higher setting value results in a stronger volume increase.
PDC VOL*
If your vehicle is equipped with “parking aid”, the volume is automatically
decreased to a pre-defined value, wh en the “parking aid” is active.
Setting the special functions– Press the button longer.
– Select the individual functions of the menu with the help of the station
keys.
– Set the desired value using the rotary/push knob or with the help of the station keys.AUX*
Switching on or off the function s of the external audio source.
Setting of the input sensitivity AUX LEV :•
AUX LEV 1 - high level, used in particular for notebooks;
•
AUX LEV 2 - middle level, used for cassettes or CD player;
•
AUX LEV 3 - low level, used for MP3 player;
PHONE*
If your vehicle is equipped with a ha ndsfree system, you can switch on or off the
monophone play function of the mobile phone calls via the loudspeakers of the
vehicle.
BEEP
Switching on or off the tone signal when storing the radio stations.
ILLUM
Switch on (value 2) or switch off (value 1) the rear lighting of the control buttons for
the radio.
AF
The function alternative frequency (AF) ensures that the best receivable frequency
of the selected station is automatically and precisely set. The replay of the broad-
cast can be muted briefly during the search process according to the best receiv-
able frequency. If no alternative frequenc y of the set station can be found and the
station no longer offers a satisfactory quality, then please select another station.

A12
A2
MENU
A2
A2
s334.7.book Page 4 Tuesday, August 12, 2008 9:23 AM

Radio5
REG
Certain programs of the broadcasting companies are divided into regional
programs at specific times. That is why in individual regions the regional programs
of a station can broadcast different contents.
First of all the unit attempts to set only alternative frequencies of the selected
station.
If the quality is however so low, that there is a risk of a “program loss”, the unit also
accepts “related” frequencies.•
FIX - the receiver switches to a regional “related” station, if the reception of the
current station could be interrupted;
•
AUTO - the receiver can access the re gional “related” station unlimited.
BT-AUDIO*
Enables a wireless transfer of MP3 data to the telephone preinstallation.
Radio modeWaveband switch-over– Press the button for a long period of time.Your radio is equipped with FM and AM wavebands. They are divided in 6 memory
levels, i.e. 3 levels for the FM waveband and 3 levels for the AM waveband. There
are each 6 memory spaces available on these levels.
Activation of the FM waveband
The FM waveband is activated when pressing the station key FM. By briefly
pressing the button , you can select between the memory levels FM1, FM2
and FM-AS.
Activation of the AM waveband
The AM waveband is activated wh en pressing the station key AM. By briefly
pressing the button , you can select between the memory levels FM1, FM2
and FM-AS.
The process of searching for and storing the radio stationsManual search
– Set the frequency of the desired radio station by pressing the button or or by turning the rotary/push knob .
Store station
– After selecting the radio station, hold the station key , on which it should be stored until it briefly switches to mute and a brief signal
sounds.
Automatic station finding with storing the radio stations
– Press the button . An automatic station finding is started during which the 6 stations with the strongest signal in the memory level FM2
and/or AM2 are stored. This applies only to the wavebands FM2 and
AM2.When storing the radio stations on the station keys is finished, you can call up
the desired radio station by pressing a station key .
Note
The stored radio stations of the curren t waveband are updated and stored once
again by repetitively pressing the button .Radio textCertain radio stations tran smit additional text information - designated as
radio text.
– The information of the radio text is displayed by pressing the button .
RADIO
A12
RADIO
A12
RADIO


A2
A12
AS
A12A12
AS
INFO
s334.7.book Page 5 Tuesday, August 12, 2008 9:23 AM

Radio
6
Note•
The text information must not be available to all radio stations.
•
Depending upon the quality of the received signal, the radio needs a specific
time, in order to correctly read all the illustrated characters.
Tra f f i c re p o r t sActivating and deactivating the traffic reports
Press the button , TP appears in the display. If a set radio station does not
transmit a traffic report, the radio searches for a station which transmits the traffic
report.
An incoming traffic report au tomatically interrupts the CD play function or listening
to a radio station, which at that moment is not transmitting a traffic report. At the
end of the traffic report, the radio automati cally returns to the original play func-
tion.
If you wish to deactivate the traffic in formation, press once again the button , TP
goes out on the display.Function SCANThe stations of a waveband can be played briefly one after the other (for
ten seconds).
– Press the set button , the radio se arches automatically all available
stations of the current waveband.
– In order to call up the original radio station, press the station key CANCEL .
– End the automatic finding by pressing the button OK. The current
radio station remains selected.
– If you wish to select other radio stations, press the button SKIP.
TP
TP
A2
A12
A12
A12
s334.7.book Page 6 Tuesday, August 12, 2008 9:23 AM